Installation Instructions
Table Of Contents
Instr 9929286 Rev 01 2018-04 Page 2 of 5
TOOLS REQUIRED
• Safety Glasses
• Drill
• Drill Bit: 1/8 inch (3 mm)
• Pliers, Push Pin Rivet
• Screwdriver Set, Torx
®
• Socket Set, Metric
• Wrench Set, Metric
IMPORTANT
Your Wireless Remote Kit is exclusively designed for your vehicle. Please read the installation instructions
thoroughly before beginning. Installation is easier if the vehicle is clean and free of debris. For your safety, and to
ensure a satisfactory installation, perform all installation steps correctly in the sequence shown.
ASSEMBLY TIME
Approximately 20–30 minutes
NOTE
Additional time may be required for optional step, or to accommodate other accessories.
HARNESS DETAIL
WIRELESS RECEIVER
qq
:
REF PART DESCRIPTION WIRE
COLOR
PIN QTY/
GENDER
CONNECTS TO
1A Wireless Receiver
- -
Vehicle structure
1B Connector, Autostop Controller/
Contactor
-
4 male Main vehicle harness breakout;
see instructions for detail
1C Connector, Wired Remote
-
4 female Wired remote socket; see
instructions for detail