Owner's Operation and Maintenance Manual

A-- 53
MAINTENANCE
Ski Skags
The skag is a replaceable bar
attached to the underside of the
ski. The purpose of the skag is
to assist in turning the snowmo-
bile and to prevent the wearing
away of the ski caused by con-
tact with roads and other bare
terrain. We recommend that
skags be checked once a week
to maintain positive steering
characteristics. Skags must be
replaced when worn to halftheir
original diameter. NOTE: See
dealer track studding and skag
chart for recommended skags.
Skag Replacement
1. Raise and support the front of the machine so the skis are approximately 6″
(15.2 cm) from the ground.
2. Remove the attaching nuts and pry the skag downward.
3. Remove the forward portion of the skag.
Reverse this procedure for new skag installation.
Skag
WARNING
Worn skis and/or skags will adversely affect handling.
Loss of vehicle control may cause serious injury or death.