Industries Automobile User Manual

CONTROLS

Engine Electrical Switches

Override Switch (1) (Reverse Speed Limiter) - This vehicle is

equipped with a reverse speed limiter system. To gain additional power

while backing, depress the override switch. NOTE: The override

switch also allows activation of Demand 4 Drive (All Wheel Drive) in

reverse, if the AWD switch is on.

Engine Stop Switch (2) - The engine will

not start or run when the switch is in the off

position. Its purpose is to provide the

operator with a quick means of engine

shutdown in case of an emergency.

Main Switch (3) - To start the engine, slide

the stop switch to the center run position and turn the main key switch

clockwise past the on position. Release t he key when the engine starts.

NOTE: Both the main switch and the

emergency engine stop switch will shut off all electrical power to the

vehicle, including lights. To stop the engine, slide the stop switch

either right or left to the off position.

Activating the override switch while the throttle is open can cause

loss of control, resulting in severe injury or death. Do not activate

the override switch while the throttle is open.

WARNING

RUN

OFFOFF