Industries Automobile User Manual

MAINTENANCE AND LUBRICATION

Filter Systems

Air Filter Service

1. Remove the seat, release the clips,

and remove the air box cover.

2. Loosen the clamp and remove the

filter.

3. Remove the fabric type pre-filter

(1) from the main filter (2). Wash

the pre-filter in soapy water, then

rinse and let dry.

4. Reinstall the pre-filter over the main

filter. (Replace the main filter if

needed.)

5. Reinstall the filter i nto the air box and

tighten the clamp. Do not over tighten

the clamp, as filter damage could occur.

Breather Filter/Hose

1. To access the breather filter, remove

the left side panel as outlined on page

93.

2. Remove the clamps and pull the filter

(3) out of the hoses. NOTE: It’s not

necessary to remove the lower hose

from the engine.

3. Inspect the filter for debris. Blow

gently through the filter in the direction

of the arrow to check for clogging.

Replace if needed.

4. Check the hoses for cracks,

deterioration, abrasion, or leaks. Replace as needed.

5. Reinstall the filter with the arrow pointing toward the engine and

secure the clamps.

Operation of your vehicle without a breather filter can cause

engine damage. Always reinstall the breather filter after

removing for service.

CAUTION