Operation Manual

51
OPERATION
Pre-Ride Inspection
Failure to inspect and verify that the vehicle is in safe operating
condition before operating increases the risk of an accident. Always
inspect the vehicle before each use to make sure it's in safe operating
condition.
Item Remarks Page
Brake system/pedal
travel
Ensure proper operation 33
111
Brake fluid Ensure proper level 112
Front suspension Inspect, lubricate if necessary 85
Rear suspension Inspect, lubricate if necessary 85
Steering Ensure free operation 114
Tires Inspect condition and pressure 12
115
Wheels/fasteners Inspect, ensure fastener tightness 115
Frame nuts, bolts,
fasteners
Inspect, ensure tightness -
Fuel and oil Ensure proper levels 39
88, 91
Coolant level Ensure proper level 101-102
Coolant hoses Inspect for leaks -
Throttle Ensure proper operation 109
Indicator lights/switches Ensure proper operation 31
Air filter, pre-filter Inspect, clean 106
Intake pre-filters Inspect, clean 107
Headlamps Check operation, apply POLARIS
dielectric grease when lamp is
replaced
117
Brake light/tail lamps Check operation, apply POLARIS
dielectric grease when lamp is
replaced
119
Seat Latch Push down on the seat back to
ensure the latch is secure
28
Seat Belt Check length of belt for damage,
check latches for proper operation
29
Cab Nets Check for wear or damage, ensure
proper installation
27