2007 Sportsman 6X6 Owner's Manual for Maintenance and Safety Read this manual carefully. It contains important safety information. This is an adult vehicle only. Operation is prohibited for those under 16 years of age.
WARNING The engine exhaust from this product contains chemicals known to cause cancer, birth defects or other reproductive harm.
WELCOME Thank you for purchasing a Polaris vehicle, and welcome to our worldwide family of Polaris owners. We proudly produce an exciting line of utility and recreational products. • Snowmobiles • All-terrain vehicles (ATVs) • RANGER utility vehicles • Victory motorcycles We believe Polaris sets a standard of excellence for all utility and recreational vehicles manufactured in the world today.
POLARIS and POLARIS THE WAY OUT are registered trademarks of Polaris Industries Inc. Copyright 2006 Polaris Sales Inc. All information contained within this publication is based on the latest product information at the time of publication. Due to constant improvements in the design and quality of production components, some minor discrepancies may result between the actual vehicle and the information presented in this publication.
TABLE OF CONTENTS Know Your Vehicle . . . . . . . . . . . . . . . . . . . . . . . 5 Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34 Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50 Emission Control Systems . . . . . . . . . . . . . . . 69 Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . 70 Adjustments . . . . . . . . . . . . . . . . . . . . . . . . . .
4
KNOW YOUR VEHICLE As the operator of the vehicle, you are responsible for your personal safety, the safety of others, and the protection of our environment. Read and understand your owner's manual, which includes valuable information about all aspects of your vehicle, including safe operating procedures. Vehicle Identification Numbers Record your vehicle's identification numbers and key number in the spaces provided. Remove the spare key and store it in a safe place.
SAFETY Safety Decals and Locations Warning decals have been placed on the ATV for your protection. Read and follow the instructions of the decals on the ATV carefully. If any of the decals depicted in this manual differ from the decals on your ATV, always read and follow the instructions of the decals on the ATV. If any decal becomes illegible or comes off, contact your Polaris dealer to purchase a replacement. Replacement safety decals are provided by Polaris at no charge.
SAFETY Safety Decals and Locations Reverse Override Warning + Front Rack Warning + + Tire Pressure/Load Warning Tire Pressure/Load Warning WARNING IMPROPER TIRE PRESSURE OR OVERLOADING can cause loss of control resulting in SEVERE INJURY OR DEATH. TIRE PRESSURE IN PSI (KPa): FRONT 5 (34.5) CENTER 5 (34.5) REAR 5 (34.5) MAXIMUM WEIGHT CAPACITY (Gross Vehicle Weight) INCLUDING MACHINE, DRIVER AND CARGO IS 1965 LBS. (893 kg). Reduce speed and allow greater distance for braking when carrying cargo.
SAFETY Safety Decals and Locations Age 16 Warning Container/No Passenger Warning + + + Clutch Cover Warning Age 16 Warning WARNING Operating this ATV if you are under the age of 16 increases your chance of severe injury or death. NEVER operate this ATV if you are under age 16. Container/No Passenger Warning WARNING Remove flammable containers from box before refueling. WARNING • Passengers can be thrown off. This can cause serious injury or death. • Never carry passengers. Maximum Box Load 800 lbs.
Safety Decals and Locations SAFETY All Wheel Drive Switch Do not push switch to engage AWD if the rear wheels are spinning. This may cause severe drive shaft and clutch damage. See your Owner's Manual. Hitch Capacity Label TRAILER MAX WEIGHT: 1500 LBS. (682 KG) ON LEVEL GROUND 850 LBS. (386 KG) UP TO 15° GRADE HITCH MAX. VERTICAL WEIGHT: 150 LBS.
SAFETY Safe Riding Gear Always wear appropriate clothing when riding an ATV. Wear protective clothing for comfort and to reduce the chance of injury. Eye Protection Helmet Long Sleeves Gloves Long Pants Boots Helmet Wearing a helmet can prevent a severe head injury. Whenever riding a Polaris vehicle, always wear a helmet that meets or exceeds established safety standards. Approved helmets in the USA and Canada bear a U.S. Department of Transportation (DOT) label.
Safe Riding Gear SAFETY Eye Protection Do not depend on eyeglasses or sunglasses for eye protection. Whenever riding a Polaris vehicle, always wear shatterproof goggles or use a shatterproof helmet face shield. Polaris recommends wearing approved Personal Protective Equipment (PPE) bearing markings such as VESC 8, V-8, Z87.1, or CE. Make sure protective eye wear is kept clean. Gloves Off-road style gloves with knuckle pads are the best for comfort and protection.
SAFETY Operator Safety WARNING Failure to follow the warnings contained in this manual can result in severe injury or death. A Polaris ATV is not a toy and can be hazardous to operate. This vehicle handles differently than other vehicles, such as motorcycles and cars. A collision or rollover can occur quickly, even during routine maneuvers like turning, or driving on hills or over obstacles, if you fail to take proper precautions.
Operator Safety SAFETY Safety Training ATV safety training is a top priority for Polaris. When you purchased your new ATV, your dealer instructed you on the authorized ATV RiderCoursesm available to you and your eligible family members. This training is included in the purchase price of your ATV. Polaris strongly encourages you and your eligible family members who will be riding the ATV to take the ATV RiderCoursesm. You were also provided with printed materials that explain safe operating procedures.
SAFETY Operator Safety The following signal words and symbols appear throughout this manual and on your vehicle. Your safety is involved when these words and symbols are used. Become familiar with their meanings before reading the manual. The safety alert symbol, on your vehicle or in this manual, alerts you to the potential for injury. WARNING The safety alert warning indicates a potential hazard that may result in serious injury or death.
SAFETY Operator Safety WARNING Serious injury or death can result if you do not follow these instructions and procedures, which are outlined in further detail within your owner's manual. • Read this manual and all labels carefully, and follow the operating procedures described. • Never operate an ATV without proper instruction. Take a training course. Purchasers of a new Polaris ATV and their eligible family members are entitled to take the ATV RiderCoursesm.
SAFETY Operator Safety • Always travel slowly and use extra caution when operating on unfamiliar terrain. Be alert to changing terrain conditions. • Never operate on excessively rough, slippery, or loose terrain. • Always follow proper turning procedures as described in this manual. Practice turning at low speeds before attempting to turn at faster speeds. Do not turn at excessive speeds. • Always have the ATV inspected by an authorized Polaris dealer if it's been involved in an accident.
Operator Safety SAFETY • Always check for obstacles before operating in a new area. Never attempt to operate over large obstacles, such as rocks or fallen trees. Always follow proper procedures when operating over obstacles as described in this manual. • Always be careful of skidding or sliding. On slippery surfaces like ice, travel slowly and use extra caution to reduce the chance of skidding or sliding out of control. • Avoid operating the ATV through deep or fast-flowing water.
SAFETY Operator Safety Equipment Modifications We are concerned for the safety of our customers and for the general public. Therefore, we strongly recommend that consumers do not install on a Polaris ATV any equipment that may increase the speed or power of the vehicle, or make any other modifications to the vehicle for these purposes. Any modifications to the original equipment of the vehicle create a substantial safety hazard and increase the risk of bodily injury.
SAFETY Operator Safety WARNING POTENTIAL HAZARD Operating this ATV without proper instruction. WHAT CAN HAPPEN The risk of an accident is greatly increased if the operator does not know how to operate the ATV properly in different situations and on different types of terrain. HOW TO AVOID THE HAZARD Beginning and inexperienced operators should complete the ATV RiderCoursesm offered by Polaris through the SVIA.
SAFETY Operator Safety WARNING POTENTIAL HAZARD Carrying a passenger on an ATV. WHAT CAN HAPPEN Carrying a passenger greatly reduces the operator's ability to balance and control the ATV, which could cause an accident and injury to the operator and/or passenger. A passenger riding on a rack or in the cargo bed can fall from the vehicle, which could result in serious injury. HOW TO AVOID THE HAZARD Never carry a passenger.
SAFETY Operator Safety WARNING POTENTIAL HAZARD Operating this ATV on public streets, roads or highways. WHAT CAN HAPPEN The ATV could collide with another vehicle. HOW TO AVOID THE HAZARD Never operate the ATV on any public street, road or highway, including dirt and gravel roads. In many states it's illegal to operate ATVs on public streets, roads and highways. WARNING POTENTIAL HAZARD Operating this ATV without wearing an approved helmet, eye protection and protective clothing.
SAFETY Operator Safety WARNING POTENTIAL HAZARD Operating the ATV after consuming alcohol or drugs. WHAT CAN HAPPEN Consumption of alcohol and/or drugs could seriously affect operator judgment. Reaction time may be slower and operator balance and perception could be affected. Consuming alcohol and/or drugs before or while operating an ATV could result in an accident causing severe injury or death. HOW TO AVOID THE HAZARD Never consume alcohol or drugs before or while operating an ATV.
SAFETY Operator Safety WARNING POTENTIAL HAZARD Attempting jumps and other stunts. WHAT CAN HAPPEN Attempting stunts increases the chance of an accident, including an overturn. HOW TO AVOID THE HAZARD Never attempt jumps or other stunts. Avoid exhibition driving. WARNING POTENTIAL HAZARD Failure to inspect the ATV before operating. Failure to properly maintain the ATV. WHAT CAN HAPPEN Poor maintenance increases the possibility of an accident or equipment damage.
SAFETY Operator Safety WARNING POTENTIAL HAZARD Removing hands from the handlebars or feet from the footrests during operation. WHAT CAN HAPPEN Removing even one hand or foot can reduce ability to control the vehicle or could cause loss of balance and ejection from the ATV. If the operator's foot is not firmly planted on the footrest, it could contact the rear wheels and lead to accident or injury.
SAFETY Operator Safety WARNING POTENTIAL HAZARD Failure to use extra caution when operating on excessively rough, slippery or loose terrain. WHAT CAN HAPPEN Operating on excessively rough, slippery or loose terrain could cause loss of traction or loss of control, which could result in an accident or overturn. HOW TO AVOID THE HAZARD Do not operate on excessively rough, slippery or loose terrain until you've learned and practiced the skills necessary to control the ATV on such terrain.
SAFETY Operator Safety WARNING POTENTIAL HAZARD Operating on excessively steep hills. WHAT CAN HAPPEN The vehicle may overturn. HOW TO AVOID THE HAZARD Never operate on hills too steep for the ATV or for your abilities. Never operate the ATV on hills steeper than 15 degrees. >15° WARNING POTENTIAL HAZARD Climbing hills improperly. WHAT CAN HAPPEN Improper hill climbing could cause loss of control or overturn.
SAFETY Operator Safety WARNING POTENTIAL HAZARD Traveling downhill improperly. WHAT CAN HAPPEN Improperly descending a hill could cause loss of control or overturn. HOW TO AVOID THE HAZARD Always follow proper procedures for traveling down hills as described in the owner's manual. NOTE: A special technique is required when braking while traveling downhill. See page 63. Always check the terrain carefully before descending a hill. Shift your weight rearward. Never travel down a hill at high speed.
SAFETY Operator Safety WARNING POTENTIAL HAZARD Stalling, rolling backwards or improperly dismounting while climbing a hill. WHAT CAN HAPPEN The vehicle could overturn. HOW TO AVOID THE HAZARD Maintain steady speed when climbing a hill. If all forward speed is lost: Keep your weight uphill. Apply the service brakes. Lock the parking brake when fully stopped. Never back down a hill. If the ATV begins rolling backwards: Keep weight uphill. Never apply engine power.
SAFETY Operator Safety WARNING POTENTIAL HAZARD Improperly operating over obstacles. WHAT CAN HAPPEN Operating over obstacles could cause loss of control or overturn. HOW TO AVOID THE HAZARD Before operating in a new area, check for obstacles. Avoid operating over large obstacles such as rocks and fallen trees when possible. If unavoidable, use extreme caution and always follow proper procedures as outlined in the owner's manual. WARNING POTENTIAL HAZARD Skidding or sliding.
SAFETY Operator Safety WARNING POTENTIAL HAZARD Operating the ATV through deep or fast-flowing water. WHAT CAN HAPPEN Tires may float, causing loss of traction and loss of control, which could lead to an accident or overturn. HOW TO AVOID THE HAZARD Avoid operating the ATV through deep or fast-flowing water.
SAFETY Operator Safety WARNING POTENTIAL HAZARD Operating this ATV with improper tires, or with improper or uneven tire pressure. WHAT CAN HAPPEN Use of improper tires, or operation of the ATV with improper or uneven tire pressure, could cause loss of control or accident. HOW TO AVOID THE HAZARD Always use the size and type of tires specified for the ATV in the owner's manual. Always maintain proper tire pressure as described in the owner's manual and on safety decals.
SAFETY Operator Safety WARNING POTENTIAL HAZARD Overloading the ATV or carrying/ towing cargo improperly. WHAT CAN HAPPEN Overloading and towing can cause changes in vehicle handling, which could lead to loss of control or an accident. HOW TO AVOID THE HAZARD Never exceed the stated load capacity for this ATV. Cargo should be properly distributed and securely attached. Reduce speed when carrying cargo or pulling a trailer. Allow a greater distance for braking.
SAFETY Operator Safety WARNING Operating a damaged ATV can result in an accident with serious injury or death. After any overturn or accident, have a qualified service dealer inspect the entire machine for possible damage, including (but not limited to) brakes, throttle and steering systems. WARNING Safe operation of this rider-active vehicle requires good judgement and physical skills.
FEATURES AND CONTROLS Switches Headlight Switch Mode/Reverse Override Switch AWD Switch Main Key Switch Engine Stop Switch WARNING Activating the override switch while the throttle is open can cause loss of control, resulting in severe injury or death. Do not activate the override switch while the throttle is open. Mode/Reverse Override Switch This vehicle is equipped with a reverse speed limiter system.To gain additional power while backing, depress the override switch.
Switches FEATURES AND CONTROLS Engine Stop Switch Move the stop switch to the center (OFF) position to stop the engine quickly. The stop switch provides the operator with a quick means of engine shutdown in case of stuck throttle or other emergency. The engine will not start or run when the switch is off. OFF ON OFF NOTE: The taillight is on whenever the main key switch is on. Turn the main key switch off to prevent battery drain. Main Key Switch Turn the main key switch off to stop the engine.
FEATURES AND CONTROLS Throttle Lever WARNING Operating an ATV with sticking or improperly operating throttle controls could cause an accident and lead to severe injury or death. Never start or operate an ATV with a sticking or improperly operating throttle. Always contact your dealer for service if throttle problems arise. Failure to check or maintain proper operation of the throttle system can result in an accident if the throttle lever sticks during operation.
Brake Systems FEATURES AND CONTROLS The braking system is controlled by the two brake levers located on the handlebars. Service Brake Lever The service brake lever is located on the left handlebar. This lever controls both front and rear wheel braking action. Use this lever for normal braking. Apply the service brakes by squeezing the left brake lever toward the handlebar. These brakes are hydraulically activated disc brakes.
FEATURES AND CONTROLS Brake Systems Master Cylinders/Brake Fluid The master cylinders are located on the left and right handlebars. Check fluid levels before each use of the ATV. The fluid level can be seen Master Cylinder through an indicator window on the top of the master cylinder. This eye will appear dark when the fluid level is full. When fluid is low, the eye will be clear. NOTE: When checking the fluid level, the ATV must be on level ground with the handlebars straight.
Parking Brake FEATURES AND CONTROLS WARNING Operating the ATV while the parking brake is engaged could result in an accident and serious injury or death. Always check to be sure the parking brake is disengaged before operating. Locking the Parking Brake 1. Squeeze and release the brake lever two or three times, then squeeze and hold. 2. Push the parking brake lock forward to engage the lock. 3. Release the brake lever. 4. To release the parking brake lock, squeeze and release the brake lever.
FEATURES AND CONTROLS Fuel Tank Cap Remove the fuel tank cap to add fuel to the fuel tank. Use either leaded or unleaded gasoline with a minimum pump octane number of 87=(R+ M/2) octane. Do not use E-85 fuel. Fuel Tank Cap Fuel Valve Fuel Valve The fuel valve is located on the left side panel. It has three positions: OFF: For vehicle storage and when transporting. ON: For normal operation. RES: For reserve supply if main supply is exhausted. There's about a 7 to 10 mile (11.
FEATURES AND CONTROLS Transmission Gear Selector The transmission gear selector is located on the right side of the vehicle. H: High Gear L: Low Gear N: Neutral R: Reverse Gear Selector To change gears, stop the vehicle, and with the engine idling, move the lever to the desired gear. Do not attempt to shift gears with engine speed above idle or while the vehicle is moving. Always place the transmission in gear and lock the parking brake whenever the vehicle is left unattended.
FEATURES AND CONTROLS Recoil Starter If the battery is too weak to start the engine, use the recoil starter. The recoil starter is located on the right side of the vehicle. Follow the starting procedures on page 53, cranking the engine with the recoil starter instead of the main key switch. 1. Grasp the recoil starter rope handle tightly. 2. Pull slowly so you can feel the engine strokes. Handle Recoil Starter NOTE: Every other stroke will be a “compression stroke” and will make the rope harder to pull.
FEATURES AND CONTROLS All Wheel Drive (AWD) System The All Wheel Drive system is controlled by the AWD switch. When the switch is off, the vehicle is in rear wheel drive at all times. When the switch is on, the vehicle is in AWD and the front wheels will automatically engage any time the rear wheels lose traction. When the rear wheels regain traction, the front wheels will automatically disengage. AWD Switch NOTE: The override switch allows activation of AWD in reverse if the AWD switch is on.
FEATURES AND CONTROLS All Wheel Drive (AWD) System Disengaging Wheel Hubs The hubs normally disengage when operating in reverse. However, one or both hubs may occasionally remain engaged. If the handlebars pull to one side, one front hub is engaged. If both hubs are engaged, steering effort increases but remains balanced from left to right, and vehicle speed is somewhat restricted. 1. Stop the vehicle and shift to reverse gear. 2. Operate in reverse for a short distance. 3.
FEATURES AND CONTROLS Instrument Cluster Your ATV is equipped with an instrument cluster that senses vehicle speed from the right front wheel. The instrument cluster measures distance in miles or kilometers as well as hours of operation. It also includes a reverse speed limiter function that limits the ATV's speed to approximately 7-9 mph. Refer to page 34 for additional information.
FEATURES AND CONTROLS Instrument Cluster Rider Information Center The rider information center is located in the instrument cluster. All segments will light up for 2.5 seconds at start-up. NOTE: If the instrument cluster fails to illuminate, a battery over-voltage may have occurred and the instrument cluster may have shut off to protect the electronic speedometer. If this occurs, take the ATV to your Polaris dealer for proper diagnosis. 1.
FEATURES AND CONTROLS Instrument Cluster Rider Information Center Standard Modes The rider information center has 4 standard modes. The reverse override button on the left handlebar is also the mode button. NOTE: If using the mode button to program the rider information center, or to toggle through the options, the transmission cannot be in reverse. Mode 1 - Odometer The odometer records the miles traveled by the ATV.
FEATURES AND CONTROLS Instrument Cluster Rider Information Center Diagnostic Mode The diagnostic mode is for informational purposes only. Please return your ATV to your dealer for all major repairs. As long as the gauge is in the diagnostic mode, the wrench icon will remain lit. To leave the diagnostic mode, turn the key switch off and on. NOTE: Any movement of the tires will also take the machine out of the diagnostic mode. To enter the diagnostics mode: 1. Turn the key switch off and wait 10 seconds. 2.
FEATURES AND CONTROLS Instrument Cluster Rider Information Center Diagnostic Mode Screen 5: Programmable service interval The purpose of the programmable service interval is to provide the consumer and dealer with a convenient reminder for routine maintenance. When your vehicle leaves the factory, this feature is set at 50 hours. You must enable the programmable service interval before it can be used.
OPERATION Fuel Safety WARNING Gasoline is highly flammable and explosive under certain conditions. • Always exercise extreme caution whenever handling gasoline. • Always refuel with the engine stopped, and outdoors or in a well ventilated area. • Do not smoke or allow open flames or sparks in or near the area where refueling is performed or where gasoline is stored. • Do not overfill the tank. Do not fill the tank neck.
OPERATION Break-In Period The break-in period for your new Polaris ATV is the first ten hours of operation, or the time it takes to use the first two full tanks of gasoline. No single action on your part is as important as following the procedures for a proper break-in. Careful treatment of a new engine and drive components will result in more efficient performance and longer life for these components.
OPERATION Pre-Ride Checklist WARNING If a proper inspection is not done before each use, severe injury or death could result. Always inspect the vehicle before each use to ensure it's in proper operating condition.
OPERATION Starting the Engine WARNING Engine exhaust contains poisonous carbon monoxide and can cause loss of consciousness resulting in severe injury or death. Never run an engine in an enclosed area. 1. Position the vehicle on a level surface. 2. Place the transmission in neutral. 3. Lock the parking brake. NOTE: The starter interlock will prevent the engine from starting if the transmission is in gear and the brake is not engaged. 4. Turn the fuel valve on. 5. Sit on the vehicle.
OPERATION Starting the Engine 8. Turn the ignition key past the ON position to engage the starter. Activate the starter for a maximum of five seconds, releasing the key when the engine starts. 9. If the engine does not start, return the key to the OFF position and wait five seconds before attempting to start again. Activate the starter for another five seconds if necessary. Repeat this procedure until the engine starts.
OPERATION Hauling Cargo Your ATV has been designed to carry or tow a certain amount of load. Always read and understand the load distribution warning labels on the vehicle, and never exceed the weight capacities outlined in the specifications section of the owner's manual and on the safety decals. WARNING Overloading the vehicle or carrying or towing cargo improperly can alter vehicle handling and may cause loss of control or brake instability. • Never exceed the stated load capacity for this vehicle.
OPERATION Hauling Cargo Dumping Cargo 1. Select a level site to dump the cargo. Do not attempt to dump or unload the vehicle while parked on an incline. 2. Lock the parking brake. 3. Dismount the vehicle. 4. Check cargo distribution. If cargo has shifted to the rear of the box, exercise caution.
OPERATION Hauling Cargo Load Distribution Load cargo as far forward as possible 1. Never exceed the maximum capacities for hauling cargo as stated on the load distribution warning labels and on page 55. 2. Always load the cargo box with the load as far forward as possible. 3. Always operate the vehicle with extreme caution whenever hauling or towing loads. Balance, handling and control may be affected. 4. Slow down. 5. The cargo box dump latch must be securely latched before loading and operating.
OPERATION Driving Safely Driving Procedures 1. Wear protective riding gear. See page 10. 2. Sit upright with both feet on the footrests and both hands on the handlebars. 3. Start the engine and allow it to warm up. See page 53. 4. Shift the transmission into gear. 5. Check your surroundings and determine your path of travel. 6. Release the parking brake. 7. Slowly depress the throttle with your right thumb and begin driving. 8. Drive slowly.
OPERATION Driving Safely Turning the Vehicle Your ATV is equipped with a solid rear axle, which drives all rear wheels equally at all times. This means that the wheel on the outside of the turn must travel a greater distance than the inside wheel when turning and the inside tire must slip traction slightly. To turn, steer in the direction of the turn, leaning your upper body to the inside of the turn while supporting your weight on the outer footrest.
OPERATION Driving Safely Driving on Slippery Surfaces Whenever riding on slippery surfaces such as wet trails or loose gravel, or during freezing weather, follow these precautions: 1. Slow down when entering slippery areas. 2. Engage AWD before wheels begin to lose traction. 3. Maintain a high level of alertness, reading the trail and avoiding quick, sharp turns, which can cause skids. 4. Correct a skid by turning the handlebars in the direction of the skid and shifting your body weight forward.
OPERATION Driving Safely Driving Uphill 15° Maximum Whenever traveling uphill, follow these precautions: 1. Drive straight uphill. 2. Avoid steep hills (15° maximum). 3. Keep both feet on the footrests. 4. Shift your weight uphill. 5. Proceed at a steady rate of speed and throttle opening. 6. Remain alert and be prepared to take emergency action. This may include quick dismounting of the vehicle. WARNING Braking and handling are greatly affected when operating in hilly terrain.
OPERATION Driving Safely Driving on a Sidehill (Sidehilling) WARNING Improperly crossing hills or turning on hills can result in loss of control or vehicle overturn, resulting in severe injury or death. Avoid crossing the side of a hill when possible. Follow proper procedures as outlined in the owner's manual. Sidehilling can dangerous and should be avoided if at all possible. If you encounter a situation where sidehilling is necessary, follow these precautions: 1. Slow down. 2.
OPERATION Driving Safely Driving Downhill WARNING Excessive speed when traveling downhill can cause loss of control and serious injury or death. Slow down. Hard use of the braking system while descending a hill could result in a frontend overturn, causing serious injury or death. Always operate the brakes slightly when descending a hill. When driving downhill, follow these precautions: 1. Shift your weight uphill. 2. Drive straight downhill. 3. Slow down. 4.
OPERATION Driving Safely Turning Around on a Hill (K-Turn) If the vehicle stalls while climbing a hill, never back it down the hill! Use the K-turn to turn around. 8 ft. (2.4 m) 1. Stop and lock the parking brake while keeping body weight uphill. 2. Leave the transmission in forward and shut off the engine. 3. Dismount on the uphill side of the vehicle, or on the left if the vehicle is pointing straight uphill. 4. Staying uphill of the vehicle, turn the handlebars full left. 5.
OPERATION Driving Safely Driving Through Water Your ATV can operate through water with a maximum recommended depth equal to the bottom of the footrests. Follow these procedures when operating through water: 1. Determine water depths and current before crossing. 2. Choose a crossing where both banks have gradual Maximum inclines. Depth 3. Proceed slowly, avoiding rocks and obstacles. 4. After crossing, dry the brakes by applying light pressure to the lever until braking action is normal.
OPERATION Driving Safely Driving Over Obstacles Be alert! Look ahead and learn to read the terrain you're traveling on. Be constantly alert for hazards such as logs, rocks and low hanging branches. WARNING Severe injury or death can result if your vehicle comes in contact with a hidden obstacle. Not all obstacles are immediately visible. Travel with caution in unfamiliar terrain.
OPERATION Driving Safely Driving in Reverse Follow these precautions when operating in reverse: 1. Always check for obstacles or people behind the vehicle. 2. Always avoid backing downhill. 3. Back slowly. 4. Apply the brakes lightly for stopping. 5. Avoid turning at sharp angles. 6. Never open the throttle suddenly. 7. Never activate the override button while the throttle is open. WARNING Failure to use caution when operating in reverse can result in serious injury or death.
OPERATION Driving Safely Parking on an Incline Avoid parking on an incline if possible. If it's unavoidable, follow these precautions: 1. Stop the engine. 2. Place the transmission in gear. 3. Lock the parking brake. 4. Always block the rear wheels on the downhill side. 5. Turn the fuel valve off.
EMISSION CONTROL SYSTEMS Noise Emission Control System Do not modify the engine, intake or exhaust components, as doing so may affect compliance with U.S.A. EPA noise control requirements (40 CFR 205.158) and local noise level requirements. Operation on Public Lands in the U.S.A. Your Polaris vehicle has a spark arrestor that was tested and qualified to be in accordance with the USDA Forest Service Standard 5100-1C.
MAINTENANCE Periodic Maintenance Chart Careful periodic maintenance will help keep your vehicle in the safest, most reliable condition. Inspection, adjustment and lubrication of important components are explained in the periodic maintenance chart. Inspect, clean, lubricate, adjust and replace parts as necessary. When inspection reveals the need for replacement parts, use genuine Polaris parts available from your Polaris dealer. Record maintenance and service in the Maintenance Log beginning on page 137.
Periodic Maintenance Chart MAINTENANCE Maintenance Chart Key X Perform these operations more often for vehicles subjected to severe use. E Emission-related service (Failure to conduct this maintenance will not void the emissions warranty but may affect emissions.) Q Have an authorized Polaris dealer perform these services. WARNING Improperly performing the procedures marked with a Q could result in component failure and lead to serious injury or death.
MAINTENANCE Periodic Maintenance Chart Item Maintenance Interval Remarks (whichever comes first) Hours Calendar Miles (Km) X Brake pad wear 10 H Monthly 60 (100) Inspect periodically X Engine oil change (break-in) 20 H 1M 125 (200) Perform a break-in oil change at one month Q 20 H Monthly 125 (200) Check terminals; clean; test X Front gearcase oil (if equipped) Battery 25 H Monthly 155 (250) Inspect level; change yearly X Middle gearcase oil (if equipped) 25 H Monthly 155 (250
Periodic Maintenance Chart Item MAINTENANCE Maintenance Interval Remarks (whichever comes first) Hours Calendar Miles (Km) X Engine oil and filter change 100 H 6M 620 (1000) Perform a break-in oil change at one month X Oil tank vent hose 100 H 12 M 620 (1000) Inspect routing, condition Q Valve clearance 100 H 12 M 620 (1000) Inspect; adjust Q Fuel system 100 H 12 M 620 (1000) Check for leaks at tank cap, lines, filter, pump; replace lines every two years Q Fuel filter 100 H 12 M 62
MAINTENANCE Lubrication Recommendations Check and lubricate all components at the intervals outlined in the Periodic Maintenance Chart beginning on page 70. Items not listed in the chart should be lubricated at the general lubrication interval. NOTE: The a-arms and lower control arms are lubricated at the factory, and no additional lubrication will be needed. However, if these components are subjected to severe use, grease zerks have been provided for additional lubrication at the user's discretion.
Lubrication Recommendations MAINTENANCE Front Prop Shaft Yoke Tie Rod Ends Swing Arm Bushings AWD Hubs Middle Axle Bearings Ball Joint 4:00 Position Center Swing Arm Housing Rear Strut Rear Axle Bearing 75
MAINTENANCE Engine Oil Premium 4 Synthetic Lubricant Polaris Premium 4 All Season synthetic engine oil has been specially formulated for use in Polaris 4-cycle engines. It's a fully synthetic, high performance, multi-viscosity oil designed to provide the ultimate in lubrication performance and protection. See page 126 for the part numbers of Polaris products. Premium 4 possesses unsurpassed film strength over the widest possible temperature range.
Engine Oil MAINTENANCE Oil Level The oil dipstick is on the left side of the ATV. 1. Position the vehicle on a level surface. 2. Start the engine. Allow it to idle for 20-30 seconds. Stop the engine. 3. Remove the dipstick. Wipe it dry with a clean cloth. 4. Reinstall the dipstick securely. Dipstick NOTE: The dipstick must be fully 5. Remove the dipstick and check the oil level. 6. Add oil as needed. Maintain the oil level in the safe range. Do not overfill.
MAINTENANCE Oil and Filter Change CAUTION Hot oil can cause serious burns to skin. Do not allow hot oil to contact skin. If the ATV is left without oil in the system for extended periods, the oil pump may lose its prime, which could result in engine damage. Always replace the oil and filter within a few hours of draining the oil. Do not allow the vehicle to be without oil overnight. Always change the oil and filter at the intervals outlined in the Periodic Maintenance Chart beginning on page 70.
Oil and Filter Change MAINTENANCE 8. Reinstall the screen fitting and rotate the fitting clockwise a minimum of 2 1/2 turns into the tank threads. Continue to rotate the fitting until the nipple of the fitting aligns with the mark on the tank. NOTE: Do not over-tighten. Maximum torque for the screen fitting is 25 ft. lbs. (34 Nm). 9. Reattach the oil line. 10. Place shop towels beneath the oil filter. Using an oil filter wrench, turn the filter counterclockwise to remove it. 11.
MAINTENANCE Oil and Filter Change Oil Pump Priming This priming procedure must be Tank performed whenever the oil hose 2" connection between the oil tank and (5 cm) pump inlet has been disconnected. 1. Clamp or pinch off the vent line approximately 2" (5 cm) from the oil tank, between the end of Clamp the oil tank vent fitting and the Pressure vent line's pressure relief slit. Relief Slit 2. Start the engine. Allow it to idle for 45-60 seconds. 3. Remove the vent line clamp.
Transmission Oil MAINTENANCE Always check and change the transmission oil at the intervals outlined in the Periodic Maintenance Chart beginning on page 70. Maintain the oil level at the bottom of the fill plug hole threads. We recommend the use of Polaris Premium AGL Synthetic Gearcase Lubricant. See page 126 for the part numbers of Polaris products. Access the transmission fill plug from the right side of the vehicle. Access the drain plug from the left side of the vehicle. Oil Check 1.
MAINTENANCE Front Gearcase Oil Always check and change the front gearcase oil at the intervals outlined in the Periodic Maintenance Chart beginning on page 70. Maintain the oil level at the bottom of the fill hole threads. We recommend the use of Polaris Premium ATV Angle Drive Fluid. See page 126 for the part numbers of Polaris products. Fill Plug Oil Check 1. 2. 3. 4. Position the vehicle on a level surface. Remove the fill plug. Check the oil level.
Cooling System MAINTENANCE The engine coolant level is controlled, or maintained, by the recovery system. The recovery system components are the recovery bottle, the radiator filler neck, the radiator pressure cap and the connecting hose. As coolant operating temperature increases, the expanding (heated) excess coolant is forced out of the engine, past the pressure cap, and into the recovery bottle.
MAINTENANCE Cooling System Radiator Coolant To ensure that the coolant maintains its ability to protect the engine, Polaris recommends that you drain the system completely every two years and add a fresh mixture of antifreeze and water. Replace the coolant any time the cooling system has been drained for maintenance or repair. If the recovery bottle has run dry, check the level in the radiator. Add coolant as needed. WARNING Escaping steam can cause severe burns.
Brakes MAINTENANCE Rear Brake The transmission brake is a hydraulic disc brake. This brake is activated by the left brake lever, which also activates the front brakes. The transmission brake system is selfadjusting. Periodically check the brake pads for wear. Replace brake pads when they are worn to 3/64" (1 mm). Periodically inspect the brake disc spline and pad wear surface for excessive wear.
MAINTENANCE Toe Alignment WARNING Severe injury or death can result from improper toe alignment and adjustment. Do not attempt to adjust tie rod alignment. All tie rod adjustments should be performed by an authorized Polaris dealer. Use the following procedure to check the toe alignment of the vehicle. The recommended toe alignment is 1/8" to 1/4" (3-6 mm) toe out. 1. Place the handlebars in a straight-ahead position. 2. Place stands in front of the vehicle, perpendicular to the rear tires. 3.
MAINTENANCE Steering Assembly The steering assembly of the ATV should be checked periodically for loose nuts and bolts. If loose nuts and bolts are found, see your Polaris dealer for service before operating the vehicle. Side Panel Removal 1. Remove the seat. 2. Grasp the rear of the side panel near the rear cab. With a quick and firm motion, pull the panel forward and outward to disengage the two rear tabs. 3. Place your hand on top of the side panel behind the fuel tank.
MAINTENANCE Tires Refer to the specifications section beginning on page 124 for recommended tire type, size and pressure. WARNING Operating your ATV with worn tires, improperly inflated tires, non-standard tires or improperly installed tires will affect vehicle handling and could cause an accident resulting in serious injury or death. Maintain proper tire pressure as described on the decal on your ATV and in the owner's manual. Always use original equipment size and type when replacing tires.
MAINTENANCE Tires Wheel Installation WARNING Improperly installed wheels can adversely affect tire wear and vehicle handling, which can result in serious injury or death. Always ensure that all nuts are torqued to specification. Do not service axle nuts that have a cotter pin installed. See your Polaris dealer. 1. Place the transmission in gear. 2. Lock the parking brake. 3.
MAINTENANCE Air Filter Always inspect and replace the air filter at the intervals outlined in the Periodic Maintenance Chart beginning on page 70. 1. Remove the seat. Pre-Filter 2. Release the air box cover clips, and remove the air box cover. Main Filter 3. Loosen the clamp and remove the filter. 4. Remove the fabric type pre-filter from the main filter. Wash the pre-filter in soapy water, then rinse and let dry. 5. Reinstall the pre-filter over the main filter. NOTE: Install a new main filter if needed.
Breather Filter/Hose MAINTENANCE Always inspect and replace the breather filter at the intervals outlined in the Periodic Maintenance Chart beginning on page 70. 1. Remove the hose clamps from the filter and pull the filter out of the hoses. NOTE: It's not necessary to remove the lower hose from the engine. 2. Inspect the filter for debris. Blow gently through the filter in the direction of the arrow to check for clogging. Replace a damaged or Breather Filter clogged filter. 3.
MAINTENANCE Lights When servicing a halogen lamp, don't touch the lamp with bare fingers. Oil from your skin leaves a residue, causing a hot spot that will shorten the life of the lamp. WARNING Poor lighting while driving can result in severe injury or death. Headlight and taillight lenses become dirty during normal operation. Wash the headlights frequently to maintain lighting quality. Hot components can cause serious burns to skin. Allow lamps to cool before servicing. Headlight Lamp Replacement 1.
MAINTENANCE Lights High Beam Adjustment The headlight beam can be adjusted slightly upward or downward. Use the following procedure to make the adjustment. 25 ft. (7.6 m) 2" (5 cm) 1. Position the vehicle on a level surface with the headlight approximately 25 ft. (7.6 m) from a wall. Lock the parking brake. 2. Measure the distance from the floor to the center of the headlight and make a mark on the wall at the same height. 3. Start the engine.Turn the headlight switch to high beam. 4.
MAINTENANCE Lights Headlight Housing Replacement 1. Remove the two screws on the lower front corners of the headlight pod. 2. Lift the pod slightly while depressing the tabs at the rear of the pod. 3. Lift the pod cover and disconnect the speedometer harnesses from the speedometer. 4. Unplug the headlamp from the wiring harness. 5. Use a small screwdriver to remove the o-rings from the headlight mounting tabs. 6. Pull the headlight housing up to release it from the locking tabs. 7.
Lights MAINTENANCE Taillight/Brakelight Lamp Replacement 1. Remove the taillight lens cover mounting screws. Remove the lens cover and gasket and set aside for reassembly. 2. Remove the lamp. 3. Apply dielectric grease to the socket and install the new lamp. 4. Test the light for proper operation. 5. Reinstall the gasket and lens cover.
MAINTENANCE Spark Plugs Spark Plug Recommendations CAUTION Using non-recommended spark plugs can result in serious engine damage. Always use Polaris-recommended spark plugs. Refer to the specifications section beginning on page 124 for the recommended spark plug type and gap for your vehicle. Always torque spark plugs to specification. Plug Condition Torque Specification New Spark Plug 9-11 ft. lbs. (12-15 Nm) Previously Installed Spark Plug 17-20 ft. lbs.
Spark Plugs MAINTENANCE Spark Plug Inspection Normal Spark Plug The normal insulator tip is gray, tan or light brown. There will be few combustion deposits. The electrodes are not burned or eroded. This indicates the proper type and heat range for the engine and the service. NOTE: The tip should not be flaky and white. A white insulator tip indicates overheating, caused by use of an improper spark plug or incorrect fuel. Wet Fouled Spark Plug The wet fouled insulator tip is black.
MAINTENANCE Vehicle Immersion CAUTION If your vehicle becomes immersed, major engine damage can result if the machine is not thoroughly inspected. Take the vehicle to your dealer before starting the engine. 1. If it's impossible to take your ATV to a dealer before starting it, follow the steps outlined below. 2. Move the ATV to dry land or at the very least, to water below the footrests. 3. Check the air box. If water is present, dry the air box and replace the filter with a new filter. 4.
MAINTENANCE Spark Arrestor WARNING Failure to heed the following warnings while servicing the spark arrestor could result in serious injury or death. The exhaust system can get extremely hot. Do not perform service on the spark arrestor while the system is hot. Allow components to cool sufficiently before proceeding. Remove any combustible materials from the area. Wear eye protection and leather work gloves. Do not stand behind or in front of the vehicle while purging.
MAINTENANCE PVT System WARNING Failure to comply with the instructions in this warning can result in severe injury or death. Do not modify any component of the PVT system. Doing so may reduce its strength so that a failure may occur at a high speed. The PVT system has been precision balanced. Any modification will cause the system to be out of balance, creating vibration and additional loads on components. The PVT system rotates at high speeds, creating large amounts of force on clutch components.
PVT System MAINTENANCE The basic operation of the Polaris PVT system is dependent on engine speed and vehicle torque requirements. As engine speed increases, the force exerted on the movable drive sheave by the flyweights also increases. This, in turn, increases the amount of pinch applied to the drive belt. Similarly, if the engine speed decreases, the amount of centrifugal force decreases, reducing the amount of belt pinch.
MAINTENANCE PVT System When To Use Low Range and High Range Condition Operating at speeds less than 7 MPH (11 km/h) Range to Use Low Towing heavy loads Low Operating in rough terrain (swamps, mountains, etc.) Low Operating at speeds greater than 7 MPH (11 km/h) High PVT Drying There may be some instances when water is accidently ingested into the PVT system. Use the following instructions to dry it out before operating. 1. Remove the drain plug. Allow the water to drain completely.
MAINTENANCE Battery Your ATV may have either a sealed battery, which requires little maintenance, or a conventional battery. A sealed battery can be identified by its flat covers on the top of the battery. A conventional battery has six filler caps on the top of the battery. Conventional Battery Always keep battery terminals and connections free of corrosion. If cleaning is necessary, remove corrosion with a stiff wire brush. Wash with a solution of one tablespoon baking soda and one cup water.
MAINTENANCE Battery WARNING Improperly connecting or disconnecting battery cables can result in an explosion and cause serious injury or death. When removing the battery, always disconnect the negative (black) cable first. When reinstalling the battery, always connect the negative (black) cable last. Battery Removal 1. 2. 3. 4. 5. 6. Disconnect the battery hold-down strap. Remove the battery cover. On conventional batteries, remove the battery vent tube.
Battery MAINTENANCE Battery Installation Using a new battery that has not been fully charged can damage the battery and result in a shorter life. It can also hinder vehicle performance. Follow the battery charging instructions on page 107 before installing the battery. 1. Ensure that the battery is fully charged. 2. Place the battery in the battery holder. 3. With conventional batteries, install the battery vent tube (sealed batteries do not have a vent tube).
MAINTENANCE Battery Battery Storage Whenever the vehicle is not used for a period of three months or more, remove the battery from the vehicle, ensure that it's fully charged, and store it out of the sun in a cool, dry place. Check battery voltage each month during storage and recharge as needed to maintain a full charge. NOTE: Power plug leads may need to be bent down so that the battery cover can be installed.
MAINTENANCE Battery Battery Charging (Sealed Battery) The following battery charging instructions apply only to the installation of a sealed battery. Read all instructions before proceeding with the installation of this battery. The sealed battery is already filled with electrolyte and has been sealed and fully charged at the factory. Never pry the sealing strip off or add any other fluid to this battery. The single most important thing about maintaining a sealed battery is to keep it fully charged.
MAINTENANCE Battery Battery Charging (Sealed Battery) NOTE: Always verify battery condition before and 1-2 hours after the end of charging. Charge Time State of Charge Voltage Action (Using constant current charger @ standard amps specified on top of battery) 100% 12.8-13.0 volts None required 75%-100% 12.5-12.8 volts 50%-75% 25%-50% 12.0-12.5 volts 11.5-12.0 volts None, check at 3 mos.
Cleaning and Storage MAINTENANCE Washing the Vehicle Keeping your Polaris vehicle clean will not only improve its appearance but it can also extend the life of various components. CAUTION High water pressure may damage components. Polaris recommends washing the vehicle by hand or with a garden hose, using mild soap. Certain products, including insect repellents and chemicals, will damage plastic surfaces. Do not allow these types of products to contact the vehicle.
MAINTENANCE Cleaning and Storage Washing the Vehicle If a high pressure water system is used for cleaning (not recommended), exercise extreme caution. The water may damage components and could remove paint and decals. Avoid directing the water stream at the following items: • Wheel bearings • Radiator • Transmission seals • Brakes • Cab and body panels • Labels and decals NOTE: If warning and safety labels are damaged, contact your Polaris dealer for free replacement.
Cleaning and Storage MAINTENANCE Storage Tips CAUTION Starting the engine during the storage period will disturb the protective film created by fogging and damage could occur. Never start the engine during the storage period. Clean the Exterior Make any necessary repairs and clean the vehicle as recommended. See page 109. Fog the Engine 1. Support the front end of the machine so the engine is level or tilted slightly rearward. 2. Remove the spark plug.
MAINTENANCE Cleaning and Storage Storage Tips Fluid Levels Inspect the fluid levels. Change fluids as recommended in the Periodic Maintenance Chart beginning on page 70. • Front demand drive unit (front gearcase) • Rear gearcase (if equipped) • Transmission • Brake fluid (change every two years and any time the fluid looks dark or contaminated) • Coolant (test strength/fill) Stabilize the Fuel 1. Fill the fuel tank. 2. Add Polaris Carbon Clean Fuel Treatment or Polaris Fuel Stabilizer.
Cleaning and Storage MAINTENANCE Storage Tips Inspect and Lubricate Inspect all cables and lubricate all areas of the vehicle as recommended in the Periodic Maintenance Chart beginning on page 70. Engine Anti-Freeze Test engine coolant strength and change if necessary. Replace coolant every two years. Battery Storage See pages 106-107 for storage and charging procedures. Storage Area/Covers Set the tire pressure and safely support the ATV with the tires slightly off the ground.
MAINTENANCE Transporting the Vehicle Follow these procedures when transporting the vehicle. 1. Stop the engine. 2. Place the transmission in gear. 3. Lock the parking brake. 4. Secure the fuel cap, oil cap and seat. 5. Always tie the frame of the ATV to the transporting unit securely with suitable straps or rope. Do not attach tie straps to the front A-arm bolt pockets. 6. Remove the key to prevent loss during transporting.
ADJUSTMENTS Camber and Caster The camber and caster are non-adjustable. Handlebars The handlebars can be adjusted for rider preference. WARNING Improper adjustment of the handlebars or incorrect torquing of the adjuster block tightening bolts can cause limited steering or loosening of the handlebars, resulting in loss of control and possible serious personal injury or death. Follow the adjustment procedures exactly, or see your Polaris dealer for service. 1. Remove the upper headlight pod. 2.
ADJUSTMENTS Throttle Cable Freeplay Adjust throttle cable freeplay at the handlebar. 1. Locate the throttle cable adjuster at the handlebar. 2. Squeeze the end of the rubber boot and slide it far enough to expose the end of the inline cable adjuster. 3. Loosen the adjuster lock nut. 4. Rotate the boot to turn the adjuster until 1/16" to 1/8" (1.5-3 mm) of freeplay is achieved at the thumb lever. NOTE: While adjusting freeplay, be sure to flip the throttle lever back and forth. 5. Tighten the lock nut. 6.
ADJUSTMENTS Front Drive Chain CAUTION Operating the vehicle with the drive chain slack out of specification could cause serious damage to the transmission and drive components. Never operate the vehicle with the drive chain slack out of specification. Check the amount of chain slack by moving the vehicle slightly forward to gain slack at the top side of the front chain. Then pull up and down on the chain. At this point the chain should have 3/8"-1/2" (9-13 mm) deflection.
ADJUSTMENTS Rear Axle Drive Chain To adjust the rear axle drive chain, loosen the rearmost eccentric locking bolts and rotate using the same method as outlined for the front chain adjustment. Total slack for the rear chain should be adjusted to 3/8"-1/2" (9-13 mm) at the tightest point in the chain.
Carburetor ADJUSTMENTS Your Polaris ATV is calibrated at the factory for optimal performance at altitudes ranging from zero to 6,000 feet (1800 m) and temperatures of +40 degrees F. (4 degrees C.) or higher. Above 6000 feet (1800 m) the engine air/fuel mixture becomes overly rich and the engine loses approximately 3% of its power for each 1000-foot (304.8 m) increase in elevation.
TROUBLESHOOTING Drive Belt Wear/Burn Possible Cause Driving onto a pickup or tall trailer in high range Starting out going up a steep incline Driving at low RPM or ground speed (3-7 MPH) Insufficient warm-up at low ambient temperatures Solution Use low range during loading. Use low range or turn around using the K-turn (see page 64). Drive at a higher speed or use low range more frequently. See page 102. Warm the engine at least 5 minutes.
Engine Doesn't Turn Over TROUBLESHOOTING Possible Cause Low battery voltage Loose battery connections Loose solenoid connections Solution Recharge the battery to 12.
TROUBLESHOOTING Engine Pings or Knocks Possible Cause Poor quality or low octane fuel Incorrect ignition timing Incorrect spark plug gap or heat range Solution Replace with recommended fuel See your dealer Set gap to specs or replace plugs Engine Runs Irregularly, Stalls or Misfires Possible Cause Fouled or defective spark plug(s) Worn or defective spark plug wires Incorrect spark plug gap or heat range Loose ignition connections Water present in fuel Low battery voltage Kinked or plugged fuel tank vent l
TROUBLESHOOTING Engine Stops or Loses Power Possible Cause Out of fuel Kinked or plugged fuel vent line Overuse of choke Water is present in fuel Fouled or defective spark plug(s) Worn or defective spark plug wires Incorrect spark plug gap or heat range Loose ignition connections Low battery voltage Incorrect fuel Clogged air filter Reverse speed limiter malfunction Electronic throttle control malfunction Other mechanical failure Overheated engine Solution Refuel, cycle key to ON position three times for
SPECIFICATIONS Sportsman 500 6X6 Gross Vehicle Weight Fuel Capacity Engine Oil Capacity Coolant Capacity Transmission Oil Capacity Front Gearcase Oil Capacity Front Rack/Storage Box Capacity Cargo Box Capacity Hitch Tongue Capacity Hitch Towing Rating Unbraked Trailer Towing Capacity* Overall Length Overall Width Overall Height Wheelbase Ground Clearance Dry Weight Minimum Turning Radius Engine Displacement Bore x Stroke Alternator Output Compression Ratio Starting System Carburetor Pilot Jet Main Jet Needl
SPECIFICATIONS Sportsman 500 6X6 Transmission Gear Reduction, Low Gear Reduction, Reverse Gear Reduction, Forward Drive Ratio, Front Drive Ratio, Final Tires/Pressure, Front Tires/Pressure, Center Tires/Pressure, Rear Brakes, Front Brakes, Rear Brake, Auxiliary Brake, Parking Headlight Automatic PVT (H/L/N/R) 6.69:1 5.17:1 3.
POLARIS PRODUCTS Part Number 2870791 2871281 2871844 2873602 2873603 2871653 2872276 2870465 2871654 2872277 2871323 2871534 2871312 2871322 2871423 2871460 2871515 2871551 2871329 2872073 2872348 2872889 2871326 2870652 2872189 2872893 2871956 2871076 126 Description Engine Lubricant Fogging Oil (12 oz. Aerosol) Premium 4 Synthetic 0W-40 (4-Cycle) Engine Oil (qt.) Premium 4 Synthetic 0W-40 (4-Cycle) Engine Oil (gal.) Gearcase / Transmission Lubricants Premium AGL Synthetic Gearcase Lubricant (qt.
LIMITED WARRANTY WARRANTY Polaris Sales Inc., 2100 Highway 55, Medina, MN 55340, gives a SIX MONTH LIMITED WARRANTY on all components of the Polaris Light Utility Vehicle against defects in material or workmanship. Polaris also gives a one year limited warranty on the final drive chain for failure due to defects. This warranty covers the parts and labor charges for repair or replacement of defective parts which are covered by this warranty. This warranty begins on the date of purchase.
WARRANTY WARRANTY COVERAGE AND EXCLUSIONS: LIMITATIONS OF WARRANTIES AND REMEDIES The Polaris limited warranty excludes any failures that are not caused by a defect in material or workmanship. This warranty does not cover accidental damage, normal wear and tear, abuse or improper handling.
WARRANTY ALL IMPLIED WARRANTIES (INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE) ARE LIMITED IN DURATION TO THE ABOVE SIX MONTH WARRANTY PERIOD. POLARIS FURTHER DISCLAIMS ALL EXPRESS WARRANTIES NOT STATED IN THIS WARRANTY. Some states do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to you if inconsistent with controlling state law.
WARRANTY Exported Vehicles EXCEPT WHERE SPECIFICALLY REQUIRED BY LAW, THERE IS NO WARRANTY OR SERVICE BULLETIN COVERAGE ON THIS VEHICLE IF IT IS SOLD OUTSIDE THE COUNTRY OF THE SELLING DEALER'S AUTHORIZED LOCATION. This policy does not apply to vehicles that have received authorization for export from Polaris Industries. Dealers may not give authorization for export. You should consult an authorized dealer to determine this vehicle's warranty or service bulletin coverage if you have any questions.
Exported Vehicles WARRANTY How to Get Service If Purchased From A Private Party: If you purchase a Polaris product from a private citizen outside of the country in which the vehicle was originally purchased, all warranty coverage will be denied. Notice If your vehicle is registered outside of the country where it was purchased, and you have not followed the procedure set out above, your vehicle will no longer be eligible for warranty or service bulletin coverage of any kind.
WARRANTY California Emission Control Warranty Statement Your Warranty Rights and Obligations The California Air Resources Board and Polaris Industries Inc., 2100 Highway 55, Medina, Minnesota 55340 (herein "POLARIS") are pleased to explain the emission control system warranty on your 2006 and later Large Spark Ignition Engine (herein "LSI engine").
WARRANTY California Emission Control Warranty Statement Limited Warranty California Only POLARIS warrants to the owner of 2006 and later LSI engines that the LSI engine (1) has been designed, built, and equipped at the time of manufacture so as to conform with the applicable regulations of the California Air Resources Board and, (2) is free from defects in materials and workmanship which may cause it to fail to conform with those regulations as applicable according to the terms and conditions stated below
WARRANTY California Emission Control Warranty Statement What is Not Covered Under This Warranty This warranty does not cover any emission-related part, which malfunctions, fails, or is damaged due to alterations and/or modifications such as changing, adding, or removing parts. When the LSI engine is being serviced under warranty, POLARIS and any of its authorized dealers shall not be liable for any loss of use of the LSI engine, for any damage to goods, or loss of time or inconvenience.
WARRANTY California Emission Control Warranty Statement Repair and Replacement of Emission-Related Parts It is recommended that only LSI engine replacement parts, which have been authorized and approved by POLARIS, should be used in the performance of any warranty maintenance or repairs of emission-related parts. These replacement parts will be provided at no charge if the part is still under warranty.
WARRANTY U.S.A. EPA Emissions Limited Warranty This All Terrain Vehicle (ATV) or Off Road Utility Vehicle (ORUV) emissions limited warranty is in addition to the Polaris standard limited warranty for this vehicle. Polaris warrants that this vehicle is; (1) designed, built, and equipped to conform at the time of initial sale with the requirements of 40 CFR 1051 and, (2) free from defects in materials and workmanship that may keep it from meeting these requirements.
MAINTENANCE LOG Present this section of your manual to your dealer each time your vehicle is serviced. This will provide you and future owners with an accurate log of maintenance and services performed.
MAINTENANCE LOG DATE 138 MILES (KM) OR HOURS TECHNICIAN SERVICE PERFORMED / COMMENTS
MAINTENANCE LOG DATE MILES (KM) OR HOURS TECHNICIAN SERVICE PERFORMED / COMMENTS 139
INDEX A Age Restrictions. . . . . . . . . . . . . . . . Air Box Drain . . . . . . . . . . . . . . . . . Air Filter . . . . . . . . . . . . . . . . . . . . . All Wheel Drive System . . . . . . . . . AWD Switch . . . . . . . . . . . . . . . . . . AWD System . . . . . . . . . . . . . . . . . . D 12 90 90 43 43 43 B Battery Charging (Sealed) . . . . . . 107-108 Conventional . . . . . . . . . . . . . 103 Fluid (Conventional) . . . . . . . 106 Installation . . . . . . . . . . . . . . . 105 Removal. . . . . . .
INDEX L S Low Range . . . . . . . . . . . . . . . . . . . 102 Lower Headlamp Replacement. . . . . 95 Lubrication Recommendations . . 74-75 Safety Training . . . . . . . . . . . . . . . . . 13 Severe Use . . . . . . . . . . . . . . . . . . . . 70 Side Panel Removal . . . . . . . . . . . . . 87 Sidehilling. . . . . . . . . . . . . . . . . . . . . 62 Signal Words . . . . . . . . . . . . . . . . . . 14 Spark Arrestor. . . . . . . . . . . . . . . . . . 99 Spark Plug Recommendations . . . . . 96 Spark Plugs .
