User manual

• The LEDs get hot during use. Keep the product away from
easily flammable materials when in use.
• The product generates heat during use. Do not cover the
product during use.
• The product is suitable for both indoor and outdoor use.
• Attention, LED light: Do not look directly into the LED light! Do
not look into the beam directly or with optical instruments!
• The mains outlet must be located near to the device and be
easily accessible.
• Only the included transformer may be used as a power supply.
• The transformer may be supplied with power only via a properly
installed power outlet connected to the public supply mains.
Before plugging in the transformer, verify that the transformer's
nominal voltage complies with the voltage of your power supply
company.
• Never plug in or unplug the transformer with wet hands.
• Do not unplug the transformer by tugging on the cord, grasp
and pull the power plug using the provided gripping surface.
• When setting up the product, make sure that the cables are not
pinched, kinked or damaged by sharp edges.
• Always lay the cables so that nobody can trip over or become
entangled in them. This poses a risk of injury.
• Unplug the transformer in case of a thunder storm for safety
reasons.
• Do not over-tighten the screws. Over-tightening the screws may
cause damage to the threading and can impair the strength of
screw connections.