Instructions
Intended use
The product is intended for decorational purposes indoors. For example it is suitable
for attaching to appropriate furniture or along windows. Plug-on type ornaments are
available under www.conrad.com
For safety and approval purposes (CE), you must not rebuild and/or modify this product.
If you use the product for purposes other than those described above, the product may
be damaged. In addition, improper use can cause hazards such as short circuiting, re,
electric shock etc. Read the instructions carefully and keep them. Make this product
available to third parties only together with its operating instructions.
This product complies with the statutory national and European requirements. All
company names and product names are trademarks of their respective owners. All rights
reserved.
Delivery content
• Lightchain
• Transformer
• Operating instructions
Safety instructions
Read the operating instructions carefully and especially observe the
safety information. If you do not follow the safety instructions and
information on proper handling in this manual, we assume no liability
for any resulting personal injury or damage to property. Such cases will
invalidate the warranty/guarantee.
a) Persons / Product
• The device is not a toy. Keep it out of the reach of children and pets.
• Do not leave packaging material lying around carelessly. These may become
dangerous playing material for children.
• Do not electrically attach this light chain to another light chain.
• Always check the product for damages before use. Should you discover any damage,
cease use of the product. If you discover damages while the product is in use (i.e.
damaged transformer), do not touch the product, risk of fatal injury due to electric
shock! First remove the power outlet to which the product is connected from the
power supply (ip off the fuse and/or automatic circuit breaker and then turn off the
residual current operated circuit breaker to disconnect the power outlet at all phases).
Now unplug the transformer from the power outlet. Discontinue use of the product
immediately, dispose of it in an environmentally friendly fashion.
• Protect the product from extreme temperatures, direct sunlight, strong jolts, high
humidity, moisture, ammable gases, vapours and solvents.
• Do not place the product under any mechanical stress.
• If it is no longer possible to operate the product safely, take it out of operation and
protect it from any accidental use. Safe operation can no longer be guaranteed if the
product:
– is visibly damaged,
– is no longer working properly,
– has been stored for extended periods in poor ambient conditions or
– has been subjected to any serious transport-related stresses.
• Please handle the product carefully. Jolts, impacts or a fall even from a low height can
damage the product.
• The lights become hot during operation. Keep the product away from highly
combustible materials while operating.
• The mains outlet must be located near to the device and be easily accessible.
• As power supply, only use the supplied transformer.
• Only connect the transformer to a normal mains socket connected to the public
supply. Before plugging in the transformer, check whether the voltage stated on the
transformer complies with the voltage of your electricity supplier.
• Never connect or disconnect transformers if your hands are wet.
• Never unplug the transformer from the mains socket by pulling on the cable; always
use the grips on the plug.
• When setting up the product, make sure that the cable is not pinched, kinked or
damaged by sharp edges.
• Always lay the cables so that nobody can trip over or become entangled in them. This
poses a risk of injury.
• For safety reasons, disconnect the transformer from the mains socket during storms.
• This product is designed to be used indoors only.
• Attention, LED light:
– Do not look directly into the LED light!
– Do not look into the beam directly or with optical instruments!
• Do not set up or operate the product under water.
• Do not connect the product to the power supply while it is still in the packaging. Lay the
product out entirely before connecting it to the power supply.
• Do not hang any objects from the product and do not cover the product.
b) Miscellaneous
• Maintenance, modications and repairs are to be performed exclusively by an expert
or at a qualied shop.
• If you have questions which remain unanswered by these operating instructions,
contact our technical support service or other technical personnel.
Disposal
Electronic devices are recyclable waste and must not be disposed of in the
household waste. At the end of its service life, dispose of the product
according to the relevant statutory regulations.
Technical data
a) Lightchain
Item No. DIY-01-003 DIY-01-004
Operating voltage 31 V/DC
Power consumption max. 3.6 W
Number of lights 8 16
Luminous colour Warm White
Power cable length 2 m
Total length approx. 3.05 m approx. 4.25 m
Distance between lights 15 cm
Operating conditions -20 to +60 °C / 20 – 80 % RH
Storage conditions -20 to +60 °C / 20 – 80 % RH
Weight approx. 70 g approx. 90 g
b) Transformer
Input voltage 100 – 240 V/AC, 50/60 Hz
Output voltage 31 V/DC
Output current 116 mA
Output power max. 3.6 W
Indoors
Operating instructions
Mix & Match
Lightchain 8
DIY-01-003
Lightchain 16
DIY-01-004
These operating instructions are published by CEI Conrad Electronic International (HK) Limited, 18th Floor, Tower 2, Nina Tower, No. 8 Yeung Uk Road,
Tsuen Wan, New Territories, Hong Kong. All rights including translation reserved. Reproduction by any method, e.g. photocopy, microlming, or the capture
in electronic data processing systems require the prior written approval by the editor. Reprinting, also in part, is prohibited. The operating instructions reect
the current technical specications at time of print.
© Copyright 2014 by CEI Conrad Electronic International (HK) Limited
DIY-01-003-004_v1_0714_02_m_DE_EN(1)
distributed by Conrad Electronic SE,
Klaus-Conrad-Str. 1, D-92240 Hirschau