User manual

b) Miscellaneous
• Consult an expert when in doubt about operation, safety or
connection of the device.
• Maintenance, modifications and repairs are to be performed
exclusively by an expert or at a qualified shop.
• If you have questions which remain unanswered by these
operating instructions, contact our technical support service or
other technical personnel.
Product overview
Operation
Do not set up or operate the product under water.
Make sure that the cables hang loosely and are not
stretched too tightly. Failure to heed this warning may
cause the cables to tear.
Do not connect the product to the power supply while
it is still in the packaging. Lay the product out entirely
before connecting it to the power supply.
Do not hang any objects from the product and do not
cover the product.
1. Unfold the extension cable so that it is not bundled.
2. Connect the plug to the correct connector on the
transformer. It is only possible to connect in one way.
3. Secure the connection by turning the plug‘s screw cap onto
the transformer‘s thread.
This product can be used to supply electricity to a maximum
of 1050 LEDs up to a length of 50 m.
4. Connect the other end of the plug to the light chain, net or
curtain. It is only possible to connect in one way.
5. Secure the connection by screwing the cap onto the thread.
6. Connect the transformer to a power outlet.
7. Disconnect the transformer from the power outlet for
extended periods of disuse.
Screw the cap to the thread on the connection socket when
it is not in use.
Maintenance and cleaning
• The product is maintenance-free apart from occasional
cleaning.
• Disconnect the transformer from the power supply before
cleaning.
• To clean, use a clean, dry, lint-free cloth. For stubborn dirt,
slightly dampen the cloth with water.
• Allow the product to dry completely before continued use.
Disposal
Electronic devices are recyclable waste and must not
be disposed of in the household waste. At the end of its
service life, dispose of the product according to the
relevant statutory regulations.
You thus fulfil your statutory obligations and contribute
to the protection of the environment.
Technical data
Item No. 1426519
Protection type IP44
Operating voltage 220 – 240 V/AC, 50/60 Hz
Output voltage 31 V/DC
Output current 484 W
Output power max. 15 W
Dimensions (W x H x D) 113 x 42 x 42 mm (transformer)
Operating conditions -20 to +70 °C / 0 – 100 % RH
Storage conditions -20 to +70 °C / 0 – 100 % RH
Weight approx. 131 g
Protected against overload, short circuits
These operating instructions are published by CEI Conrad Electronic International (HK) Limited, 18th Floor, Tower 2,
Nina Tower, No. 8 Yeung Uk Road, Tsuen Wan, New Territories, Hong Kong. All rights including translation reserved.
Reproduction by any method, e.g. photocopy, microfilming, or the capture in electronic data processing systems
require the prior written approval by the editor. Reprinting, also in part, is prohibited. The operating instructions
reflect the current technical specifications at time of print.
© Copyright 2016 by CEI Conrad Electronic International (HK) Limited
1426519_v1_0716_02_m_EN
distributed by Conrad Electronic SE,
Klaus-Conrad-Str. 1, D-92240 Hirschau
5 m