User manual

Product overview
75 mm
100 mm
75 mm
125 mm
75 mm
150 mm
TIMER
4H 8H
MODE
Candle Light
ON OFF
2
1
10
9
8
7
6
3
4
5
1 Infrared LED 4 Light button 7 button
2 OFF button 5
button 8 Candle button
3 8 H button 6 Battery compartment
(backside)
9 4 H button
10 ON button
Operation
The product must not be used in or under water.
Do not operate the product if it is still in its packaging.
Do not hang any objects from the product and do not
cover the product.
Do not place the product near sources of heat such as
chimneys or stoves.
The LED is non-replaceable.
Remove the insulating strips from the battery compartments
of the LED Wax Candles before first-time use.
1. Remove the product from the packaging.
2. Place the product on a dry, horizontal surface, e.g. a table,
window ledge, etc.
3. Turn the product on or o using the switch on the bottom
(ON = On, OFF = O).
4. Turn o the product and remove the batteries for extended
periods of disuse.
Replace the batteries when the LED no longer lights up.
Remote control
Remove the insulation strip from the battery compartment
(6) of the remote control before first time use.
•Make sure there are no obstacles located between the infrared
LED (1) of the remote control and the LED Wax Candles.
•If you do not want to operate all the LED Wax Candles, move a
bit closer towards the LED Wax Candle, thereby ensuring visual
contact between remote control and LED Wax Candle.
•The operating range of the remote control depends on the
ambient conditions and the battery capacity.
•Replacing the battery is required when the operating range
of the remote control drops significantly or if the LED Wax
Candles cannot be operated when pressing any button.
•Open the battery compartment as indicated on the backside of
the remote control and remove the old battery.
•Insert a button cell battery of type CR2025 into the battery
holder, making sure the positive terminal (“+” marking on the
battery) faces up.
•Push the battery holder back into the battery compartment to
close. Make sure the battery holder locks into place.
Description of buttons
ON button (10) Turn on the LED Wax Candles
OFF button (2) Turn o the LED Wax Candles
button (5) / button (7) Dimmer function
Light button (4) Steady lighting function
Candle button (8) Flickering mode
4 H button (9) /
8 H button (3)
Timer function: The LED Wax
Candles will automatically turn
o after 4 or 8 hours. In order to
turn them on again, press the ON
button (10) on the remote control.
Maintenance and cleaning
•The product is maintenance-free, except for any change of
batteries and occasional cleaning.
•Turn o the product and let it cool down suciently before
cleaning.
•To clean, use a clean, dry, lint-free cloth. For stubborn dirt,
slightly dampen the cloth with water. Allow the product to dry
completely before continued use.
Disposal
a) Product
Electronic devices are recyclable waste and must not
be disposed of in the household waste. At the end of its
service life, dispose of the product according to the
relevant statutory regulations.
Remove any inserted batteries and dispose of them
separately from the product.
b) Batteries
You as the end user are required by law (Battery
Ordinance) to return all used batteries. Disposing of
them in the household waste is prohibited.
Contaminated batteries are labelled with this symbol to indicate
that disposal in the domestic waste is forbidden. The designations
for the heavy metals involved are: Cd = Cadmium, Hg = Mercury,
Pb = Lead (name on batteries, e.g. below the trash icon on the
left).
Used batteries can be returned to collection points in your
municipality, our stores or wherever batteries are sold.
You thus fulfil your statutory obligations and contribute to the
protection of the environment.
Technical data
a) LED Wax Candle
Operating voltage .................................4.5 V (3 x 1.5 V batteries,
  type AAA)
Power consumption .............................0.06 W
Battery life ................................................approx. 200 h
Number of lights ....................................1
Luminous colour ....................................Warm White
Operating conditions ..........................-10 to +40 °C / 10 – 90 % RH
Storage conditions ...............................-10 to +40 °C / 10 – 90 % RH
Dimensions (H x W) .............................100/125/150 x 75 mm
Weight (Set of 3) ..................................670 g (incl. batteries)
b) Remote control
Operating voltage .................................3 V lithium battery,
.type CR2025
These operating instructions are published by CEI Conrad Electronic International (HK) Limited, 18th Floor, Tower 2,
Nina Tower, No. 8 Yeung Uk Road, Tsuen Wan, New Territories, Hong Kong. All rights including translation reserved.
Reproduction by any method, e.g. photocopy, microfilming, or the capture in electronic data processing systems
require the prior written approval by the editor. Reprinting, also in part, is prohibited. The operating instructions
reflect the current technical specifications at time of print.
© Copyright 2015 by CEI Conrad Electronic International (HK) Limited
LBA-30-007_v1_0515_02_m_EN
distributed by Conrad Electronic SE,
Klaus-Conrad-Str. 1, D-92240 Hirschau