Instructions

• Consult an expert when in doubt about operation, safety or connection of the
device.
• Maintenance, modications and repairs are to be performed exclusively by an
expert or at a qualied shop.
• If you have questions which remain unanswered by these operating instructions,
contact our technical support service or other technical personnel.
• Attention, LED light:
- Do not look directly into the LED light!
- Do not look into the beam directly or with optical instruments!
• The LEDs are permanently installed and non-replaceable.
b) Batteries
• Correct polarity must be observed while inserting the batteries.
• Never replace the batteries with wet or moist hands.
• Batteries should be removed from the device if it is not used for a long period of
time to avoid damage through leaking. Leaking or damaged batteries might cause
acid burns when in contact with skin, therefore use suitable protective gloves to
handle corrupted batteries.
• Batteries must be kept out of reach of children. Do not leave batteries lying
around, as there is risk, that children or pets swallow them.
• All batteries should be replaced at the same time. Mixing old and new batteries in
the device can lead to battery leakage and device damage.
• Do not disassemble, short-circuit or throw batteries into re. Never recharge non-
rechargeable batteries. There is a risk of explosion!
Operating elements
1 Handle
2 Lampshade
3 LED indicator
4 Battery compartment (not depicted)
5 On/off button
6 Battery compartment lid
7 Base hook (on bottom)
8 Hook (not depicted)
1
3
4
5
6
2
7
Inserting/changing batteries
• Insert batteries before rst use or replace the batteries when the light begins dimming or the
product does not turn on when you press the on/off button (5).
• Turn the battery compartment lid (6) counter clockwise and remove it.
• Insert three new 1.5 V batteries, type mono (D), LR20 (not included), into the battery
compartment, observing correct polarity (positive/+ and negative/-).
• Make sure the sealing ring on the battery
compartment lid is secure.
• Place both recesses in the battery
compartment lid onto the respective
notches in the battery compartment (see
illustration at right). The arrow markings
inside the battery compartment lid and
the battery compartment can be used as
a guide.
• Fasten the battery compartment lid by
turning clockwise. You should be able to
hear and feel the battery compartment lid
click into place.
Always close the battery compartment lid fully to ensure splashproof protection.
Do not use rechargeable batteries. The lower voltage of rechargeable batteries
(rechargeable battery = 1.2 V, battery = 1.5 V) and the lower capacity result in a
shorter operating time compared to normal batteries. Use only premium quality
alkaline batteries to guarantee extended, sure operation.
Operating instructions
Camping lamp Pro 280
Item no. 1499881
Intended use
The product is intended for use as a light source independent of the mains voltage, e.g. for
camping. The product’s 2 lighting modes as well as the ashing light mode supply lighting for
adventurous nighttime activities. The camping light can be hung using the hook. Remove the
lamp shade to widen the light eld, then use the base hook to hang the product upside down.
The LED indicator lets you nd the product in the dark easily.
The product features a IPx4 design and is splashproof when the battery compartment lid is
closed.
For safety and approval purposes, you must not rebuild and/or modify this product. If you use
the product for purposes other than those described above, the product may be damaged.
In addition, improper use can cause hazards such as short circuiting, re etc. Read the
instructions carefully and keep them. Make this product available to third parties only together
with its operating instructions.
This product complies with the statutory national and European requirements. All company
names and product names are trademarks of their respective owners. All rights reserved.
Delivery content
• Camping lamp
• Hook
• Operating instructions
Up-to-date operating instructions
Download the latest operating instructions from our website www.conrad.com/downloads or
scan the printed QR code. Follow the instructions on the website.
Description of symbols
The symbol with an exclamation mark in a triangle indicates important instructions
contained in these operating instructions that must be followed.
The arrow symbol alerts the user to the presence of important tips and notes on
using the device.
Safety instructions
Read the operating instructions carefully and especially observe the safety
information. If you do not follow the safety instructions and information
on proper handling in this manual, we assume no liability for any resulting
personal injury or damage to property. Such cases will invalidate the warranty/
guarantee.
a) General
• The device is not a toy. Keep it out of the reach of children and pets.
• Do not leave packaging material lying around carelessly. These may become
dangerous playing material for children.
• Protect the product from extreme temperatures, strong jolts, ammable gases,
vapours and solvents. Shield the product from dust and dirt.
• Do not place the product under any mechanical stress.
• If it is no longer possible to operate the product safely, take it out of operation and
protect it from any accidental use. Safe operation can no longer be guaranteed
if the product:
- is visibly damaged,
- is no longer working properly,
- has been stored for extended periods in poor ambient conditions or
- has been subjected to any serious transport-related stresses.
• Please handle the product carefully. Jolts, impacts or a fall even from a low height
can damage the product.
• Never point a garden hose at the product.
• The product must not be used in or under water.
• Never use the product immediately after it has been brought from a cold room into
a warm one. The condensation generated could destroy the product.