User manual

• The product has an IP44 weatherproof rating (rain and splashproof) and can be mounted and
operated both indoors and outdoors. However, never place the product in or under water.
• When used outdoors or when an electrical device is connected to it, a suitable IPx4 power
supply unit must be plugged into the IP44 plug socket built into the light. If you use an
extension cable, it must be suitable for outdoor use.
• If you are not using the built-in plug socket, do not forget to tightly close the protective cover.
• Ensure that you mount the product correctly, otherwise there is a risk of a fatal electric shock!
• The light must not be operated using a dimmer.
• This product is not explosion-proof. Never use the product in rooms which contain or may
containammablegases,vapoursorcombustibledusts!Thereisariskofexplosion!
• The light mustonly beused when mountedin axed location. Never mount thelight in
vehicles.
• Do not hang or secure any objects (e.g. decorations) to the light.
• Always comply with the accident prevention regulations for electrical equipment when using
the product in industrial facilities.
• Unplug the mains plug from the mains socket on the base of the light if you do not plan to use
the product for an extended period of time.
• For safety reasons, disconnect the mains plug from the socket on the base of the light during
thunderstorms.
• Make sure that the mains cable is not squeezed, bent, damaged by sharp edges or subjected
to mechanical stress. Avoid excessive thermal stress on the mains cable from extreme heat or
cold.Donotmodifythemainscable.Otherwisethemainscablemaybedamaged.Damaged
mains cables can cause a fatal electric shock.
• Never insert or unplug the mains plug when your hands are wet.
• Consult a technician if you are not sure how to use or connect the product.
• Maintenance,modicationsandrepairsmustbedonebyatechnicianoraspecialistrepair
centre.
• If you have questions which remain unanswered by these operating instructions, contact our
technical support service or other technical personnel.
Product overview
1 Lamp shade
2 Motion sensor (PIR)
3 - SENS + adjusting screw
4 - TIME + adjusting screw
5 Plug socket with cover (not shown)
6 Wall mount (not shown)
2
6
5
4
3
1
Preparation for mounting
Refer to section „Safety information“!
7 m
2 m
7 m
~120 °
5 m 4 m
 Warning!Thisproductmustonlybeinstalledbyaqualiedelectricianwhoisfamiliarwiththe
relevant regulations. By carrying out improper work on the mains voltage you endanger not only
yourself, but also others. If you are not sure how to mount the product, consult a specialist. Do
not attempt to mount it yourself.
• Onlymountthelightonastablesurface.Dependingonthesurface,youmayneedtousethescrewsand/
or dowels provided.
• Theinstallationheightinuencesthemotionsensor'sreactionrange.Theoptimummountingheightfor
the light is 2 m.
• Donotmountthelightnearreectivesurfacessuchasswimmingpools,tosmoothwhitewalls,ornear
heat sources because they could trigger the motion sensor unnecessarily.
• The light must be protected with a 10/16A fuse at the sub-distribution. An earth leakage circuit breaker
must be installed before this.
• Thelightmayonlybeinstalledwhenitisdisconnectedfromthepowersupply.Itisnotsufcientjustto
turn off the light switch!
• Isolate all poles of the mains cable from the mains supply by removing the electric circuit fuse or switching
off the automatic fuse. Then turn off the earth leakage circuit breaker. Protect the product against
unauthorised use (e.g. install a danger sign).
• Check that the mains cable is isolated from the mains, e.g. with an appropriate testing device.
Operating instructions
LED outdoor wall light, Style Classic
Item no. 1581289
Intended use
This product is designed to light indoor and outdoor areas and is intended for wall mounting. The LED
outdoor wall light is designed according to IP44 and is made splashproof by a tightly closed cover. The light
cannot be dimmed. A passive infrared sensor (PIR) built into the product switches the light on when it detects
movement around it. An adjustable timer turns the light off again. An electrical device can be connected to
the plug socket built into the base.
For safety and approval purposes, you must not rebuild and/or modify this product. Using the product for
purposes other than those described above may damage the product. In addition, improper use can cause
hazardssuchasashortcircuit,reorelectricshock.Readtheinstructionscarefullyandstoretheminasafe
place.Onlymakethisproductavailabletothirdpartiestogetherwithitsoperatinginstructions.
This product complies with statutory national and European regulations. All company and product names are
trademarks of their respective owners. All rights reserved.
Delivery content
• LED outdoor wall light
• 2x screws
• 2x dowels
• Operatinginstructions
Up-to-date operating instructions
To download the latest operating instructions, visit www.conrad.com/downloads or scan the QR code on this
page. Follow the instructions on the website.
Explanation of symbols
The symbol with the lightning in a triangle indicates that there is a risk to your health, e.g. due to
an electric shock.
The symbol with an exclamation mark in a triangle is used to highlight important information in
these operating instructions. Always read this information carefully.
All metal parts that could carry a voltage in the event of a fault during operation or maintenance
must be connected to the protective earth conductor.
Read the operating instructions carefully.
The arrow symbol indicates special information and advice on how to use the product.
Safety information
Read the operating instructions and safety information carefully. If you do not follow the
safety instructions and information on proper handling in this manual, we will assume no
liability for any resulting personal injury or damage to property. Such cases will invalidate
the warranty/guarantee.
• This product is not a toy. Keep it out of the reach of children and pets.
• Do not leave packaging material lying around carelessly. It may become a dangerous toy
for children.
• Protect the product from extreme temperatures, impacts, ammable gases, vapours and
solvents.
• Do not place the product under any mechanical stress.
• If it is no longer possible to operate the product safely, stop using it and prevent unauthorized
use. Safe operation can no longer be guaranteed if the product:
- is visibly damaged,
- is no longer working properly,
- has been stored for extended periods in adverse ambient conditions or
- has been subjected to any serious transport-related stress.
• Always handle the product carefully. Jolts, impacts or a fall even from a low height may
damage the product.
• Also observe the safety information and operating instructions of any other devices which are
connected to the product.
• Mount the light so that children cannot reach it.
• The light must only be operated using the mains voltage (see "Technical data" section). Never
try to operate the light using another type of voltage, as this may destroy the product.
• This product is designed according to protection class I; the earth wire must be connected.
• Warning, LED light:
- Do not look directly at the LED light!
- Do not look into the beam directly or with optical instruments!
• TheLEDlightbulbsarermlyembeddedandcannotbereplaced.