Instructions

ManualsBrandsPolarlite ManualsBuilding TechnologyPolarlite PL-8814035 Holiday lights (mini) Inside mains-powered 80 LED Warm white Illuminated length: 7.9 m

Indoors

Operating Instructions

Intended use

The product is intended for use as indoor decoration. It can be

attached to appropriate furniture or along windows.

For safety and approval purposes, you must not rebuild and/or

modify this product. Using the product for purposes other than

those described above may damage the product. In addition,

improper use can cause hazards such as short circuit, ﬁre, electric

shock, etc. Read the instructions carefully and store them in

a safe place. Make this product available to third parties only

together with its operating instructions.

This product complies with statutory national and European

regulations. All company and product names are trademarks of

Delivery content

• Main unit

• Spare bulbs x 3pcs (item no. 1762807), or

Spare bulbs x 5pcs (item no. 1762808)

• Operating Instructions

Safety instructions

Read the operating instructions and safety information

carefully. If you do not follow the safety instructions

and information on proper handling in this manual, we

assume no liability for any resulting personal injury

or damage to property. Such cases will invalidate the

warranty/guarantee.

a) Persons / Product

• The device is not a toy. Keep it out of the reach of children and

pets.

• Do not leave packaging material lying around carelessly. These

may become dangerous playing material for children.

• Always check the product for damages before use. Should

you discover any damage, cease use of the product. If you

discover damages while the product is in use (i.e. damaged

cable or plug), do not touch the product, risk of fatal injury due

to electric shock! First disconnect the mains outlet to which

the product is connected from the power supply (ﬂip o the

fuse and/or automatic circuit breaker and then turn o the

residual current-operated circuit breaker to disconnect the

power outlet at all phases). Now unplug from the power outlet.

Discontinue use of the product immediately, dispose of it in an

environmentally friendly fashion.

• Protect the product from extreme temperatures, strong jolts,

ﬂammable gases, vapours and solvents.

• Do not place the product under any mechanical stress.

• If it is no longer possible to operate the product safely, take it

out of operation and protect it from any accidental use. Safe

operation can no longer be guaranteed if the product:

– is visibly damaged,

– is no longer working properly,

– has been stored for extended periods in poor ambient

conditions or

– has been subjected to any serious transport-related stresses.

• Please handle the product carefully. Jolts, impacts or a fall even

from a low height can damage the product.

• The LEDs get hot during use. Keep the product away from

easily ﬂammable materials when in use.

• The product generates heat during use. Do not cover the

product during use.

• The mains outlet must be located near to the device and be

easily accessible.

• The transformer may be supplied with power only via a properly

installed power outlet connected to the public supply mains.

Before plugging in the transformer, verify that the product’s

nominal voltage complies with the voltage of your power supply

company.

• Never plug in or unplug with wet hands.

• Do not unplug the transformer by tugging on the cord, grasp

and pull the power plug using the provided gripping surface.

• When setting up the product, make sure that the cables are not

pinched, kinked or damaged by sharp edges.

• Always lay the cables so that nobody can trip over or become

entangled in them. This poses a risk of injury.

• Unplug the product in case of a thunder storm for safety

reasons.

• The product is intended for use in indoor areas only.

• Attention, LED light:

– Do not look directly into the LED light!

– Do not look into the beam directly or with optical instruments.

b) Miscellaneous

• Consult an expert when in doubt about operation, safety or

connection of the device.

• Maintenance, modiﬁcations and repairs are to be performed

exclusively by an expert or at a qualiﬁed shop.

• If you have questions which remain unanswered by these

operating instructions, contact our technical support service or

other technical personnel.

Decorative Chain

Fairy lights with 80 LEDs, WW

Item no. 1762807

Fairy lights with 150 LEDs, WW

Item no. 1762808

Summary of content (2 pages)

PAGE 1
Indoors Decorative Chain Fairy lights with 80 LEDs, WW Item no. 1762807 Fairy lights with 150 LEDs, WW Item no. 1762808 Intended use a) Persons / Product The product is intended for use as indoor decoration. It can be attached to appropriate furniture or along windows. • The device is not a toy. Keep it out of the reach of children and pets. For safety and approval purposes, you must not rebuild and/or modify this product.
PAGE 2
1. Product overview 3m 7.9 m Item No. 1762807 3m 14.9 m Item No. 1762808 Lay the product out entirely and arrange the cables so that they lie freely and are not tangled. 2. Attach the product to a suitable mounting site (e.g. on a piece of furniture). Where necessary use plastic cable ties to secure the product. 3. Connect the plug of the power cable to the socket on the transformer. It is only possible to connect in one way.