Instructions

Product overview
Operation
The product must not be used in or under water.
Do not use the product when it is still in the packaging.
Do not hang objects on the product or cover the
product.
The LED is not dimmable and cannot be replaced.
1. Remove the product from the packaging.
2. Pull the insulating strips out of the battery compartment on
the bottom of the product.
3. Place the product on a dry horizontal surface such as a table
or windowsill.
4. To turn the light on and o, move the switch on the bottom
of the product (TIMER = On with timer function, OFF = O).
5. The product comes with a Timer function. The light turns
on for approximately 5 hours, and then turns back on
automatically after 19 hours.
Example: You switch on the light at 3:00 pm (by moving
the switch to the TIMER position). The light will turn on from
3:00 pm to 8:00 pm and then switch o automatically. It
will turn back on again at 3:00 pm on the following day. This
cycle is repeated provided that the switch is set to the TIMER
position and there is sucient battery power remaining.
10 cm
10.8 cm
6. If you do not plan to use the product for an extended period,
turn it o and remove the battery.
Replacing the battery
Replace the battery if the LED stops working.
• Ensure that the switch is set to the OFF position before opening
the battery compartment.
• Remove the screw from the battery compartment with a small
Phillips screwdriver.
• Turn the battery compartment cover anticlockwise with a coin
or other similar object (1/8 turn), and then remove the cover.
• Remove the used battery.
• Place a CR2032 battery into the battery compartment. We
recommend using high-quality batteries. Ensure that the battery
is inserted in the correct polarity ( "+" = positive; "-" = negative).
• Place the two tabs on the battery compartment cover onto the
slot on the battery compartment.
• Turn the battery compartment cover clockwise (1/8 turn).
• Insert the screw.
• Tighten the screw with a small Phillips screwdriver to secure the
cover in place.
Care and cleaning
• Before cleaning the product, turn o the light and let it cool
down suciently.
• Remove the battery before cleaning the product.
• Do not use abrasive detergents, rubbing alcohol or other
chemical solutions, as these may damage the casing or stop the
product from functioning properly.
• Use a clean, dry, lint-free cloth to clean the product. To remove
stubborn dirt, moisten the cloth slightly with water. Allow the
product to dry out completely before using it again.
Disposal
a) Product
Electronic devices are recyclable waste and must not
be placed in household waste. Always dispose of the
product according to the relevant statutory regulations.
Remove any inserted battery and dispose of it separately
from the product.
b) Batteries
You are required by law to return all used batteries. They
must not be placed in household waste.
Batteries containing hazardous substances are labelled with
this symbol to indicate that disposal in household waste is
forbidden. The abbreviations for heavy metals in batteries are:
Cd=Cadmium, Hg = Mercury, Pb = Lead (indicated on the
battery, e.g.below the waste icon on the left). Used batteries
can be returned to local collection points, our stores or battery
retailers.
You thus fulfil your statutory obligations and contribute to the
protection of the environment.
Technical data
Power supply 1 x 3 V battery (CR2032)
Power consumption 0.06 W
Number of lights 1
Lamp colour Yellow flicker light
Battery life 72 hours
Operating conditions +0 to +40 °C, 0–95 % RH
Storage conditions +0 to +40 °C, 0–95 % RH
Dimensions (H x Ø) 10.8 x 10 cm
Weight 190 g
1559298_V2_0717_02_LS_m_GBDistributed by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau
These operating instructions are published by CEI Conrad Electronic International (HK) Limited, 18th Floor, Tower 2,
Nina Tower, No. 8 Yeung Uk Road, Tsuen Wan, New Territories, Hong Kong. All rights including translation reserved.
Reproduction by any method (e.g. photocopying, microfilming, or the capture in electronic data processing
systems) requires prior written approval from the editor. Reprinting, also in part, is prohibited. These operating
instructions reflect the current technical specifications at the time of printing.
© Copyright 2017 by CEI Conrad Electronic International (HK) Limited