Instructions

Product overview
Operation
The product must not be used in or under water.
Do not use the product when it is still in the packaging.
Do not hang objects on the product or cover the
product.
Do not place the product near to sources of heat such
as fireplaces or stoves.
The LEDs are not dimmable and cannot be replaced.
1. Remove the product from the packaging.
2. Place the product on a dry horizontal surface such as a table
or windowsill.
3. Remove the battery compartment cover.
4. Insert two AA batteries. We recommend using high-quality
batteries. Ensure that the batteries are inserted in the correct
polarity ( "+" = positive; "-" = negative).
5. Replace the battery compartment cover.
21.4 cm
10 cm
6. To turn the light on and o, move the switch on the bottom
of the product to the ON or OFF position).
7. The product comes with a timer function. The light turns
on for approximately 5 hours, and then turns back on
automatically after 19 hours.
Example: You switch on the light at 3:00 pm and move the
switch to the Timer 5
H
ON + 19
H
OFF position. The light
will turn on from 3:00 pm to 8:00 pm and then switch o
automatically. It will turn back on again at 3:00 pm on the
following day. This cycle is repeated provided that the
on/o switch is set to the TIMER position and there is
sucient battery power remaining.
8. If you do not plan to use the product for an extended period,
turn it o and remove the batteries.
Inserting the batteries
Replace the batteries if the LED stops working.
• Ensure that the on/o switch is set to the OFF position before
opening the battery compartment.
• Remove the battery compartment cover.
• Remove the used batteries.
• Insert two new AA-batteries. We recommend using high-quality
batteries. Ensure that the batteries are inserted in the correct
polarity ( "+" = positive; "-" = negative).
• Close the battery compartment and ensure that it snaps into
place.
Care and cleaning
• Before cleaning the product, turn o the light and let it cool
down suciently.
• Remove the batteries before cleaning the product.
• Do not use abrasive detergents, rubbing alcohol or other
chemical solutions, as these may damage the casing or stop the
product from functioning properly.
• Use a clean, dry, lint-free cloth to clean the product. To remove
stubborn dirt, moisten the cloth slightly with water. Do not press
too hard on the glass, otherwise it may break.
• Allow the product to dry out completely before using it again.
Disposal
a) Product
Electronic devices are recyclable waste and must not
be placed in household waste. Always dispose of the
product according to the relevant statutory regulations.
Remove any inserted batteries and dispose of them
separately from the product.
b) Batteries
You are required by law to return all used batteries.
They must not be placed in household waste.
Batteries that contain hazardous substances are labelled with
this symbol to indicate that disposal in domestic waste is
forbidden. The abbreviations for heavy metals in batteries are:
Cd=Cadmium, Hg = Mercury, Pb = Lead (indicated on the
battery, e.g. below the waste icon on the left). Used batteries
can be returned to local collection points, our stores or battery
retailers.
You thus fulfil your statutory obligations and contribute to the
protection of the environment.
Technical data
Power supply 2 x 1.5 V batteries, type AA
Power consumption 0.06 W
Number of lights 1
Lamp colour Yellow flicker light
Operating conditions +0 to +40 °C, 0–95 % RH
Storage conditions +0 to +40 °C, 0–95 % RH
Dimensions (H x Ø) 21.4 x 10 cm
Weight 550 g
1559284_V2_0717_02_LS_m_GBDistributed by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau
These operating instructions are published by CEI Conrad Electronic International (HK) Limited, 18th Floor, Tower 2,
Nina Tower, No. 8 Yeung Uk Road, Tsuen Wan, New Territories, Hong Kong. All rights including translation reserved.
Reproduction by any method (e.g. photocopying, microfilming, or the capture in electronic data processing
systems) requires prior written approval from the editor. Reprinting, also in part, is prohibited. These operating
instructions reflect the current technical specifications at the time of printing.
© Copyright 2017 by CEI Conrad Electronic International (HK) Limited