Instructions

Product overview
8.2 cm
13 cm
Operation
The product must not be used in or under water.
Do not operate the product if it is still in its packaging.
Do not hang any objects from the product and do not
cover the product.
Do not place the product near sources of heat such as
chimneys or stoves.
The LED is non-dimmable and non-replaceable.
1. Remove the product from the packaging. Remove the
protective film.
2. Place the product on a dry, horizontal surface, e.g. a table,
window ledge, etc.
3. Remove the battery compartment cover.
4. Insert two new AA-batteries. We recommend using high
quality batteries. Observe the correct polarity (“+” = positive,
“-“ = negative), as stated inside the battery compartment.
5. Insert the battery compartment cover.
6. Turn the product on or o using the switch at the bottom of
the product (On = On, O = O).