Instructions

8. The product features a timer. After you turn the product
on, it will stay on for approx. 5 hours and then switch o
automatically. The product will turn on again 19 hours later.
Example: Slide the on/o switch to the Timer position at
3pm. The product will stay on from 3pm to 8pm and then
switch o automatically. It will turn itself on again at 3pm on
the following day. This interval will be repeated provided that
the on/o switch is in the Timer position and the batteries
are not empty.
9. Put the glass cover back on the LED candle.
10. Turn o the product and remove the batteries for extended
periods of disuse.
Replacing the batteries
Replace the batteries when the LED no longer lights up.
• Remove the glass cover.
• Make sure that the on/o switch is O before opening the
battery compartment.
• Remove the battery compartment cover.
• Remove the exhausted batteries.
• Insert two new AA-batteries. We recommend using high quality
batteries. Observe the correct polarity (“+” = positive, “-“ =
negative), as stated inside the battery compartment.
• Close the battery compartment. Make sure the cover clicks
audibly into place.
• Put the glass cover back on the LED candle.