26”- 46” HD Widescreen Commercial LCD TV USER’S MANUAL Your LCD TV may look slightly different from the one pictured above.
Table of Contents Important Safety Instructions ................................................................................ 2 Accessory List ......................................................................................................... 4 Disc Information ...................................................................................................... 5 View of Unit ..............................................................................................................
Important Safety Instructions The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electrocution. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.
Important Safety Instructions 1) 2) 3) 4) 5) 6) 7) 8) 9) 10) 11) 12) 13) 14) Read and follow all directions. IMPORTANT FOR LASER PRODUCTS Keep these instructions. 1. CLASS 1 LASER PRODUCT Heed all warnings. 2. DANGER: Visible laser radiation when open and interlock failed or defeated. Avoid direct exposure to Do not use near water. beam. Clean only with dry cloth. 3. CAUTION: Do not open the top cover. There are no Do not block any ventilation user serviceable parts inside the unit. Leave all openings.
Accessory List ITEM NAME QTY Remote Control (optional) 1 Batteries for Remote Control (optional) 2 Power Supply Cord 1 (Cannot be removed from TVs 19” or smaller) Operation Manual 1 Note: ¾ Accessories and their numbers are subject to modification without prior notice.
Disc Information (for systems equipped with DVD Players) Discs Supported DISC LOGO CONTENTS SIZE MAXIMUM TIME 133min(SS-SL) DVD Audio & Video (Active picture) 242min(SS-DL) 12cm 266min(DS-SL) 484min(DS-DL) CD JPEG z z Audio Still high resolution 12cm 74min 12cm The software maker specifies the operating method of some DVD discs. Please refer to the instruction manual of the disc.
View of Unit Front and Right Side Panel (including optional DVD player) 7. PLAY button Press to start disc playback in DVD mode. 8. EJECT button Press to eject disc from disc tray. 9. POWER button Press to enter or exit standby mode. 10. Disc Tray Slot Insert disc into this slot. 11. SD/MS/MMC card port Insert SD/MS/MMC card into this slot. 12. USB Port Connect external USB device. 13. Remote Sensor 14. Power Indicator Lights blue while system is active and red while system is in standby. 15.
View of Unit Rear Panel Open the back cover on the right side of the unit’s rear panel and all the jacks will appear, as shown on the figure below: 1. Y/Pr(Cr)/Pb(Cb) (Component) and L/R audio Input Jacks Connect Y/Pr(Cr)/Pb(Cb) (Component) input source in AV3 (Component) mode. 2. Y/Pr(Cr)/Pb(Cb) (Component) and L/R audio Input Jacks Connect Y/Pr(Cr)/Pb(Cb) (Component) input source in AV4 (Component) mode. 3.
View of Unit Rear Panel Open the back cover on the right side of the unit’s rear panel and all the jacks will appear, as shown on the figure below: 13. RS232/SERVICE Jack (Hospitality VOD Use) 14. HDMI Jack Connect HDMI input source. 15. DC OUT Jack (Hospitality VOD Use) 16.
Remote Control For TV Operation 1. POWER button Press to enter or exit standby mode. 2. 0~9 Number buttons Press to select numbers. 3. MTS button Press repeatedly to select SAP, Mono or Stereo mode in TV mode. 4. VOL +/- button Press to increase or decrease the volume. 5. MUTE button Press to mute or unmute the speaker audio output. 6. Input button Press to enter Input menu.
Remote Control For TV Operation 12. 13. 14. 15. 16. 17. 18. 19. 20. -10- button Press number buttons to select channel and then press this button to go immediately to the selected channel. +10/- button Used for selection of high-numbered (100+) channels while in TV mode. Last button Press to return to the previously viewed channel in TV mode. CH / button Press to select channel in TV mode. Freeze button Press to freeze the current picture. Menu button Press to enter or exit the TV setup menu.
Remote Control (Continued) For DVD Operation (for models so equipped) 1. Play button Press to play the disc in DVD mode. 2. Pause button During disc playback, press to pause playback or start step frame-by-frame playback. Press the PLAY button to resume normal playback. 3. button Press to activate fast backward playback function during disc playback. 4. button Press to activate fast forward playback function during disc playback. 5. 0~9 Number buttons Press to select numbers. 6.
Remote Control For DVD Operation (for models so equipped) 12. 13. 14. 15. 16. 17. 18. 19. 20. -12- Eject button Press to eject the disc. ■ Stop button In DVD mode, press to stop playback. Press the PLAY button to resume normal playback; press twice repeatedly to stop playback completely. button Press to go to the next chapter/track during disc playback. button During disc playback, press once to go to the beginning of current chapter/track; press twice to go to the previous chapter/track.
Remote Control Preparation Using Remote control Softly push the back cover to open the battery compartment. Point the remote control unit from no more than about 7 meters (22 feet) from the television and within about 60 degrees of the front of the unit. Insert two batteries (1.5V, size AAA), ensuring the polarity matches the marks inside the compartment. Softly press the back cover to close it. z • The operating distance may vary depending on room illumination.
System Connections • • • • Do not connect the power cord until all other connections have been made. Ensure that you observe and correctly connect colored cables when connecting audio and video cables. Before connecting, open the cover on the right side of the unit’s rear panel. If you wall mount the television, ensure that screws used between the wall mount and the back of the television are 18 mm (0.70”) or less in length.
System Connections Connecting an External AV Signal Source (AV2) Use audio cables to connect an external signal source to the AV2 (Composite 2) audio input jacks on the jack panel of the unit. Use either composite video or S-Video cables for the video connection to the input jack on the jack panel of the unit. After connection, turn on the power of the unit and the external AV signal source and use the Input button to select AV2 (Composite) mode. Note: 1.
System Connections Connecting External an AV Signal Source（AV3/AV4） Use AV cables to connect an external AV signal source to the Y/Pb (Cb) /Pr (Cr) (Component) input jacks on the rear panel of the unit. After connection, turn on the power of the unit and the external AV signal source and press the Input button to select AV3 (Component) or AV4 (Component) mode. Note: Component signals typically provide better image quality than composite or S-Video signals.
System Connections Connecting an HDMI Signal Source Follow the figure below to connect an HDMI signal source to the HDMI jack on the rear panel of the unit. After connection, turn on the power to the television and the external HDMI device and use the Input button to select HDMI mode. Note: HDMI provides both audio and video signals and typically provides superior image quality to component, S-Video or composite.
System Connections Connecting a Digital Amplifier This unit is designed with an optical digital audio jack, can be connected to the digital amplifier, see the figure below: -18-
System Connections Connecting a PC Follow the steps and figure below to connect PC to the unit. 1. Connect one end of the VGA cable to the VGA input jack on the jack panel of the unit and the other end to the PC VGA output. 2. Connect one end of the audio cables to the PC audio input jack on the jack panel of the television and the other end to the PC audio output jack. 3. Set the PC video resolution to match that of the television (typically 1024 x 768 or 1360 x 768).
System Connections Connecting a TV Signal Source Connect a TV signal source (antenna or analog cable) to the RF (TV) jack on the jack panel of the unit. After connection, turn on the power of the unit and use the Input button to select TV mode. Connecting the Power Supply Connect one end of power supply cord to the power jack on the jack panel of the unit and the other end to the wall AC outlet.
System Connections Connecting Earphones Connect earphones to the earphone jack on the jack panel of the unit for listening. When earphones are connected, the television will automatically mute internal speaker output. Note: Excessively loud volume could damage your hearing. Please turn down the television volume before connecting earphones, and then raise the volume to a comfortable level.
Input Source Selection The unit incorporates multiple video modes which can be selected via the Input button on the television or remote. Press the Input button to enter Input menu. The screen will display as shown below: On the input menu, press the button to select the desired video mode and press the Enter button. Note: Units with optional integrated DVD players will display the DVD input as shown above.
System Setup Preparation 1. After connection, press the POWER button to turn on the unit. 2. Use the Input button to select TV mode and follow the procedures below. Setup Settings Press the Menu button to enter the main setup menu as shown right. On the menu, press the ▲▼ button to select the Setup and press the ◄ ► button to enter submenus. Press the ▲▼ button to select items; press the ◄ ► button to return to the previous menu. Press the Exit button to exit the menu.
System Setup Manual Ch Search Press the ▲▼ button to select the Manual Channel Search and press the Enter button to enter the menu as shown: On the menu, press the button to select items and press the Enter button to confirm or set; press the Menu button again to return to the previous menu.
System Setup Brightness Press the ▲▼ button to select Brightness and press the Enter button to enter the menu as shown. Within the menu, press the ◄ ► button to adjust the value and press the Enter button to store setup and return to the previous menu. Sharpness Press the ▲▼ button to select Sharpness and press the Enter button to enter the menu as shown. Within the menu, press the ◄ ► button to adjust the value and press the Enter button to save and return to the previous menu.
System Setup Audio Settings Press the Menu button to enter the main setup menu. Press the ▲▼ button to select Audio and press the ◄ ► button to enter the menu as shown. Within this menu, press the ▲▼ button to select items; press the ◄ ► button to return to the previous menu. Press the Exit button to exit the menu. Audio Language Press the ▲▼ button to select the Audio Language and press the Enter button to select the desired item if the program contains multi-audio languages.
System Setup Feature Settings Press the Menu button to enter the main setup menu. Press the ▲▼ button to select Feature and press the ◄ ► button to enter the menu, as shown. Within this menu, press the ▲▼ button to select items; press the ◄ ► button to return to the previous menu. Press the Exit button to exit the menu. Time Set Press the ▲▼ button to select Time Set and press the Enter button to enter the menu as shown.
System Setup Advanced Video Menu Press the ▲▼ button to select Advanced Video Menu and press the Enter button to enter the menu as shown. Within the menu, press the button to select items and press the Enter button to save; press the Menu button to return to the previous menu. Password Set Press the ▲▼ button to select Password Set and press the Enter button to enter the menu as shown. Use the number buttons to input the current password. The default password is 0000.
System Setup Blockable content includes Fantasy violence [FV], adult language [L], sexual situations [S], violent scenes [V] and suggestive dialogues [D] On the menu, press the button to allow content by MPAA or TV rating and press the Enter button to save. Press the Menu button to return to the previous menu. Closed Caption Mode Press the ▲▼ button to select Closed Caption Mode and press the Enter button to select the desired item.
Special Features of the DVD Module Your TV may have come equipped with an optional removable DVD player. The television is designed to allow simultaneous use of two different modules; the DVD player can be installed in three different positions. Please follow the procedures below to remove or install the DVD module. Notes: 1. The television does not support simultaneous use of a DVD module and a hospitality VOD device or Enseo set top box. 2.
DVD Playback Operation Preparation 1. Install the DVD module into the TV as detailed above. 2. Connect the module to the power supply and press the POWER button to turn on the unit. 3. Use the Input button on the TV or remote to select DVD mode. 4. Gently insert the disc, with the label side toward the front of the television, into the disc tray slot. 5. The disc will be drawn into the unit and loaded automatically. Warning: Use of poor quality discs could result in damage to the DVD module or television.
DVD Playback Operation (Continued) Pause During playback, press the Pause button once to pause the playback; press it repeatedly to start step-by-step playback and press the Play button to resume normal playback. Previous and Next During playback, press the button to go to the next chapter. Press the button once to return to the beginning of the current chapter; press it twice to go to the previous chapter.
DVD Playback Operation (Continued) Various Camera Angles The movies on some discs have been recorded from various camera positions, which allow scene viewing from different perspectives. When playing a disc containing various camera angles, the camera symbol appears on the screen. Press the Angle button repeatedly until the desired perspective is shown. The picture will be adjusted in 1～2 seconds. CD Playback Play After loading a CD disc, the unit will play all tracks on the disc by default.
DVD Playback Operation (Continued) JPEG Playback JPEG is a common format for pictures and digital photographs. The DVD module is capable of displaying JPEG images stored on a DVD or CD disc. Play After loading a JPEG disc, a root menu appears on the screen. Use the Enter button and the direction button to select a submenu, and then use the ▲▼ button to select the contents. Note that some discs have JPEG and other content.
USB and SD/MS/MMC Card Function Preparation In DVD mode, connect an external USB device to the USB port or insert a SD/MS/MMC card into the SD/MS/MMC card slot on the right side of the optional DVD module. Note ¾ Make sure that files are stored on the USB device or the SD/MS/MMC card before connection. File Playback 1. Press the Card button to shift to desired mode and the screen will display the menu, as shown: 00:00 00:00 001/002 BAK JPEG 2.
DVD System Setup Preparation 1. In DVD mode, press the Setup button to open DVD setup menu. 2. Press the button to select the Setup menu 3. Press the Setup button again to exit the DVD setup menu. General Setup Page Press the Setup button to enter the General Setup Page, as shown: 1. Within this menu, press the button to select an item. 2. Press the Enter button to enter. 3. Press the button to return. TV Display Press the button to select TV Display. Press the Enter button to enter the setup.
DVD System Setup OSD Lang 1. Press the button to select OSD Language. 2. Press the Enter button to enter the setup. 3. Use the button to select the desired language. 4. Press the Enter button again to confirm selection and return to the previous menu. Screen Saver 1. 2. 3. 4. Press the button to select Screen Saver. Press the Enter button to enter the setup. Press the button to select On or Off. Press the Enter button again to confirm selection and return to the previous menu. 1. 2. 3. 4.
DVD System Setup Audio Setup Page Press the Setup button to enter the General Setup Page and then press the button to select Audio Setup Page, as shown below: 1. Within this menu, press the button to select the item. 2. Press the Enter button to enter. 3. Press the button to return. Dolby Digital Setup On Audio Setup Page, press the button to select Dolby Digital Setup and press the Enter button to enter the setup, as shown: 1. On this menu, press the button to select the item. 2.
DVD System Setup Dynamic 1. 2. 3. 4. Press the button to select Dynamic. Press the Enter button to enter the setup. Press the button to setup. Press the Enter button again to confirm setup and return to the previous menu. HDCD Setup On Audio Setup Page, press the button to select HDCD Setup and press the Enter button to enter the setup, as shown below: 1. Within this menu, press the Enter button to enter the setup. 2. Press the button to select the desired item. 3.
DVD System Setup HD Mode On Video Setup Page, press the button to select HD Mode and press the Enter button to enter the setup, as shown: 1. Within this menu, press the Enter button to enter the setup. 2. Press the button to select the desired item. 3. Press the Enter button again to confirm selection and return to the previous menu. Video Quality Setup On Video Setup Page, press the button to select Quality and press the Enter button to enter the setup, as shown: 1.
DVD System Setup Brightness 1. 2. 3. 4. Press the button to select Brightness. Press the Enter button to enter the setup. Press the button to adjust the level. Press the Enter button again to confirm selection and return to the previous menu. 1. 2. 3. 4. Press the button to select Contrast. Press the Enter button to enter the setup. Press the button to adjust the level. Press the Enter button again to confirm selection and return to the previous menu.
DVD System Setup Subtitle 1. 2. 3. 4. Press the button to select Subtitle. Press the Enter button to enter the setup. Press the button to select subtitle language. Press the Enter button again to confirm selection and return to the previous menu. 1. 2. 3. 4. Press the button to select Disc Menu. Press the Enter button to enter the setup. Press the button to select menu language. Press the Enter button again to confirm selection and return to the previous menu. Disc Menu Default 1.
Use of the Wall Mount Your TV may have come equipped with an optional wall mount, which can be attached to the TV through use of the mounting holes on the back of the system. We recommend removing the TV stand prior to wall mounting the TV. Please refer to the figure and the procedure below. Notes: 1. Before the operations below, make sure that the television is unplugged and powered off. 2.
Troubleshooting Note: if a hospitality VOD system is in use, please ensure all VOD functionality is working properly, contacting the VOD provider’s technical support if necessary, prior to following the television troubleshooting procedures below. Many simple problems can quickly be solved using the procedures below. Please follow the procedures below prior to contacting Polaroid customer service.
Specifications Model 26” 32” TFT-LCD Resolution 1366x768 1366x768 1366x768 1366x768 1366x768 TFT-LCD Screen Size 26 inches 31.5 inches 37 inches 40 inches 46 inches Laser Wavelength 780/650 nm 780/650 nm 780/650 nm 780/650 nm 780/650 nm Video System NTSC NTSC NTSC NTSC NTSC Frequency Response 20Hz ～ ±2.5dB 20Hz～20kHz ±2.5dB 20Hz ～ ±2.
Warranty Warranty and service terms for your account are detailed in your Master Purchase Agreement. For warranty or service-related issues or concerns, please contact Polaroid at http://www.polaroid.com/service or by phone at 1-888-779-6779.
20070918 -47-
