43" 2160p (4K), LED Chromecast built-in TV 49" 2160p (4K), LED Chromecast built-in TV 55" 2160p (4K), LED Chromecast built-in TV 65" 2160p (4K), LED Chromecast built-in TV 75" 2160p (4K), LED Chromecast built-in TV
Contents IMPORTANT SAFETY INSTRUCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 SAFETY INFORMATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 What is Included/TV Placement Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Unit and Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Important Safety Instructions • Read these instructions – All the safety and operating instructions should be read before this product is operated. • Keep these instructions – The safety and operating instructions should be retained for future reference. • Heed all warnings – All warnings on the appliance and in the operating instructions should be adhered to. • Follow all instructions – All operating and use instructions should be followed.
Safety Information To ensure reliable and safe operation of this equipment, please read carefully all the instructions in this user guide, especially the safety information below. Electrical safety • • • • • • • • • • • The TV set should only be connected to a main power supply with voltage that matches the label at the rear of the product. To prevent overload, do not share the same power supply socket with too many other electronic components.
What is Included/TV Placement Setup Unit and Accessories 43” MTS P.MODE S.MODE SLEEP ASPECT 1 2 3 4 5 6 7 8 9 0 RECALL 4 Screws CH 43" 2160p (4K), 60Hz, LED Chromecast built-in TV 49" 2160p (4K), 60Hz, LED Chromecast built-in TV SOURCE 55" 2160p (4K), 60Hz, LED Chromecast built-in TV 65" 2160p (4K), 60Hz, LED Chromecast built-in TV MENU CC 75" 2160p (4K), 120Hz, LED Chromecast built-in TV EXIT ADD EPG FAV+ FAV.
49GSR4100KM 200mm 200mm Four mounting holes (size M6 screw) Screws(3 4*23BMH Screws(3) 4*23BMH Wall Mounting The TV is provided with mounting holes for a VESA approved wall mounting bracket (NOT SUPPLIED). The VESA mounting pattern is 200 x 200mm. Remove the screws holding the base to the base bracket and lift the base away (do not remove the base mounting brackets). Mount the VESA bracket using 4 x M6 x 10 isometric threaded screws (not supplied).
Wall Mounting The TV is provided with mounting holes for a VESA approved wall mounting bracket (NOT SUPPLIED). The VESA mounting pattern is 200 x 200mm. Remove the screws holding the base to the base bracket and lift the base away (do not remove the base mounting brackets). Mount the VESA bracket using 4 x M6 x 10 isometric threaded screws (not supplied). Do not use screws longer than 10 mm; damage will occur to the internal components.
75GSR4100KL 600mm 400mm Four mounting holes (size M6 screw) Screws(3 4*25 BMH Screws(3) 4*25 BMH Wall Mounting The TV is provided with mounting holes for a VESA approved wall mounting bracket (NOT SUPPLIED). The VESA mounting pattern is 600 x 400mm. Remove the screws holding the base to the base bracket and lift the base away (do not remove the base mounting brackets). Mount the VESA bracket using 4 x M6 x 20 isometric threaded screws (not supplied).
CH+ VOL+ MENU SOURCE POWER Button Functions 1. 2. 3. 4. 5. 6. 7. 8. 9.
Connecting to External Devices Connecting external devices to your LED TV LAN HDMI3 HDMI2(ARC) HDMI1(MHL) RF USB 5V OPTICAL Headphone 0.5A 1. LAN:Network connection port. 2. HDMI :Connect to High-Definition(HD) signal output device.(HDMI can support 4K60Hz Signal) 3. RF: Connect to the antenna(75ff VHF/UHF) socket with the RF coaxial cable. 4. OPTICAL:Connect a digital sound system to this jack. 5. USB:Connect to a USB storage device to play compatible audio and photo files. 6.
Remote Control 1. POWER Turns the LED TV on and off (standby mode). 2. MTS In NTSC receiving mode, press to select. the audio modes to Mono, Stereo or SAP. In ATSC Digital receiving mode, press to display 1 2 theaudio selection menu on the screen. Using the 3 5 Navigator,button to select the desire audio 6 4 mode. 3. S.MODE Sound Mode, press repeatedly to select 1 2 3 the presetting sound effect modes. 7 4 5 6 4. P.MODE Picture Mode, press repeatedly to select the preset picture modes. 7 8 9 5.
22. FAV+.Next favourite channel. 23. CC Press repeatedly to activate and/or set the CC (Closed Caption Display) modes. 24. FAV. Show the list of favorite channels. 25.FAV-.Previous favourite channel. Install the Batteries If the remote control fails to operate the TV functions, replace the batteries in the remote control. 1. Open the battery cover. 2. Insert two size-AAA batteries. (Place the batteries with their terminals corresponding to the (+) and (-) indications in the battery compartment.) 3.
Chromecast built-in Turning on your TV for the first time The first time you turn on your TV, the initial setup wizard opens. The wizard guides you through setting up your TV including the Chromecast built-in setup, menu language, time zone, TV signal source, and the channel list. • If you are using an Android mobile device, go to Using an Android mobile device. • If you are using an iOS (Apple) mobile device, go to Using an iOS (Apple) mobile device.
4 Type google.com/cast/setup in the search bar of your device’s browser. 5 Tap ACCEPT to agree to the Terms of Service and Privacy Policy.
6 Touch DEVICES and choose the TV with Google Home you want to set up. Touch SET UP. 7 Touch CONTINUE.
8 Make sure the code on your device matches the code on your TV. Touch I SEE THE CODE. 9 Optional: Change the name of your TV with Chromecast built-in to something distinct by deleting the current name and typing in a new name. Note: Guest mode and Send Chromecast built-in device usage data and crash reports to Google are enabled by default. If you don't want to enable them, touch the check marks next to their corresponding prompts. Touch CONTINE.
10 Choose the Wi-Fi network you want to connect to your TV with Chromecast built-in. Enter password.Touch CONTINUE. 11 If your TV with Chromecast built-in needs an update, it will automatically update at this time and will let you know when the update is complete.Touch CONTINUE.
12 Touch SIGN IN. 13 Touch CONTINUE. 14 Touch LEARN HOW TO CAST. 15 Choose a sample clip to learn how to Cast. Important Note:please make sure yourAndroid/IOS device is connected to the same wifi network as the tv.
Casting a video, movie, or TV show After you set up Chromecast built-in on your TV and mobile device, you are ready to cast videos, movies and TV shows. 1 On your mobile device, make sure that Wifi is turned on. 2 Open a Chromecast built-in-enabled app. 3 Tap the video, movie, or TV program you want to cast, then tap (Chromecast built-in button). 4 Tap the device you want to cast to. 5 To stop casting, tap , then tap Stop casting.
4 Type google.com/cast/setup in the search bar of your device’s browser. 5 Open bluetoothif you don’t want open bluetooth,pls skip to step 7.
6 Touch DEVICES and choose the TV with Google Home you want to set up. Touch SETUP,skip to step 8. 7 Connect the wifi which blongs to Chromecast built-in.
8 Touch CONTINUE. 9 Touch I SEE THE CODE 10 Touch OK; Optional: Change the name of your TV with Chromecast built-in to something distinct by deleting the current name and typing in a new name. Note: Guest mode and Send Chromecast built-in device usage data and crash reports to Google are enabled by default. If you don't want to enable them, touch the check marks next to their corresponding prompts. Touch CONTINUE.
11 Choose the Wi-Fi network you want to connect to your TV with Chromecast built-in. Enter password. Touch CONTINUE. 12 Touch SIGN IN.Touch CONTINUE.
13 Touch LEARN HOW TO CAST 14 Choose a sample clip to learn how to Cast. If you still have questions,please visit www.polaroidhdtv.com or google.
TV Setting Main Menu Operation Press MENU to display the main menu or return to the previous menu or close the main menu. Press ◄ / ► to highlight the desired menu icon, and press ENTER to select. If no buttons are pressed, the menu will close automatically after about 10 seconds. Input Channel Picture Audio Google Cast Lock Time Settings Help SELECT INPUT SOURCE Press Press Press Press INPUT button to display the input source list. / button to select the input source you want.
Channel Menu Press MENU to enter the main menu, Press ◄ / ► button to select. Press ENTER / to enter. Press MENU again to exit or back to parent menu. Press / button to select among Air/Cable / Auto Scan / Signal Information/Channel List . Press ENTER to enter. Press ◄ / ► button to adjust. Press MENU again or back to parent menu. Air/Cable Select signal type. Press ◄ / ► button to select(Air/Cable). Auto Scan Automatically search for channels. Press ENTER button to enter.
Only available when there is signal under DTV. After finishing your adjustment, Press MENU button to return back to the previous menu. Channel List Display your program list. Press ENTER button to enter.
Picture menu Press MENU to enter the main menu, Press ◄ / ►button to select. Press ENTER to enter. Press MENU again to exit or back to parent menu. Press / button to select among Picture Mode /Brightness/ Contrast / Color/ Tint / Sharpness / Color Temperature/Advanced Settings. Press ENTER to enter. Press ◄ / ► button to adjust. Press MENU again or back to parent menu. picture mode Adjust picture mode to change picture appearance.
Contrast Adjust the highlight intensity of the picture, but the shadow of the picture is invariable. Press ◄ / ► button to adjust. Color Adjust the saturation of the color based on your own like. Press ◄ / ► button to adjust. Tint Adjust the hue(Red,Green,Blue) of the picture. Press ◄ / ►button to adjust . Sharpness Adjust the peaking in the detail of the picture. Press ◄ / ► button to adjust.
Audio Menu Press MENU to enter the main menu, Press ◄ / ► button to select. Press ENTER to enter. Press MENU again to exit or back to parent menu. Press ▼ / ▲ button to select among Sound Mode/ Sound EQ / Balance / Audio Language /Digital Audio Output/AVL. Press ENTER to enter. Press ◄ / ► button to adjust. Press MENU again or back to parent menu. Sound Mode Select a sound mode to achieve ideal sound. Press ◄ / ► button to select(Standard/User/Movie/Sports/Music).
Balance Adjust the balance between left and right speakers to adapt to your listening position. Press ◄ / ► button to adjust. Audio Language Select the language supported by the chosen digital channel. It is available Only in TV. Press ◄ / ► button to select(English / French / Spanish). Digital Audio Output Send digital audio to external audio system. Press ◄ / ► button to select. PCM off Auto Select to output audio in 2-channel stereo. AVL Set the auto volume control.
Chromecast built-in Press MENU to enter the main menu, Press ◄ / ► button to select. Press ENTER to enter. Press EXIT to exit or back to parent menu. For detail please refer to page 12~23. Lock menu Press MENU to enter the main menu, Press ◄ / ► button to select. Press ENTER to enter. Press MENU again to exit or back to parent menu. Press / button to select among Change Password/ System Lock / Input Block / US Rating / Canada Rating /RRT Setting / RRT Reset. Press ENTER to enter.
Enter your 4- digital password. Default password is 1470 or 0000,and if forget what you set, please call the service center. Change Password Enter a new 4-digital password then re-enter it to confirm. Press ENTER button to enter. Press ◄ button to clear. Press ► button to cancel. System Lock Lock or unlock the buttons on the TV. Press ◄ / ► button to select(Off / On). Input Block Block or unblock the input sources. Press ENTER button to enter. Press ◄ / ► button to select(Unblock / Block).
US Rating Restrict movie and TV programs by US Ratings. Only available when "System Lock" is "on". Press ENTER button to enter. Press MENU button to back. For the United States, the rating setting basically include the following options: TV, MPAA. Canada Rating Restrict movie and TV programs by Canadian Ratings. Only available when "System Lock" is "on". Press ENTER button to enter. Press MENU button to back. RRT Setting Display an advance V-Chip rating table for digital channels.
Sleep Timer Set a timer for the TV to turn off automatically. Press ◄ / ► button to select(Off / 10min/20min / 30min / 60min / 90min / 120min/180min/240min). Settings Menu Press MENU to enter the main menu,Press ◄ / ► button to select. Press ENTER to enter. Press MENU again to exit or back to parent menu. Press / button to select among Menu Language / OSD Timeout / Closed Caption /CEC/HDMI Color Range /HDMI EDID/ Setup Wizard/Restore Default/ Active Standby Mode/TTS. Press ENTER to enter.
Menu language Select an OSD menu language can be displayed.Default English is selected as menu language. Press ◄ / ►button to select language.(English / Français / Español ) OSD Time out Adjust the duration of the OSD (on screen display) menu. Press ◄ / ► button to select.(Off/5 Sec./10Sec./15Sec./20Sec.) Closed Caption Adjust Closed Captioning settings. Only available under TV and AV source. Press ENTER button to enter.
HDMI Color range Press ◄ / ► button to select Auto/0-255/16-235. HDMI EDID Press ◄ / ► button to select defult/1.4/2.0. Setup Wizard Connect RF cable to your TV Aerial socket. Select Language Press ◄ / ► button to select the language to be used for menus and message. Press / button to select and press ENTER button to enter the sub-menu. Select Time Press / button to select the time zone, daylight saving time and time format you want. Press ◄ / ► button on the remote control to adjust.
Auto Scan Press ◄ / ► button to select the antenna type. Press ▼ / ▲ button to select and press ENTER button to start auto scan. Restore Default Change power on options or reset TV to factory default. Press ENTER button to enter. Active standby mode Press ◄ / ► button to select on/off TTS Press ► button to select TTS, then press Enter button to enter the sub-menu. TTS Press ◄ / ► button to select on/off verbosity Press ◄ / ► button to select high/low.
Help menu Press MENU to enter the main menu, Press ◄ / ► button to select. Press ENTER to enter. Press MENU again to exit or back to parent menu. Press / button to select among Quick Setup Guide/ Wifi-Mac/WIFI-IP Addr/Ethemet-Mac/Ethemet-IP Addr/ Netifilx Esn/Software Version/Google Cast Version/Model name/Serial Number. Press ENTER to enter. Press ► button to review Quick Setup Guide. Press MENU again or back to parent menu.
Troubleshooting If the device performance fails, check whether the detected problem is in the following table. If your device still fails, contact customer service. SYMPTOM POSSIBLE CAUSE REMEDY TV – No signal input connected, loose or disconnected. Signal cable is loose or not connected. Ensure signal cable is not loose or disconnected. Reattach and try again. Remote Control Distance is short, no control. Receiver of remote control is covered. Ensure the remote receiver is not obstructed.
Specifications Specifications Mode 43GSR4100KN TV System ATSC Maximum 3840x2160 Brightness 240 cd/m2 Static Contrast 3000:1 Response Time 8 ms Consumption 150W Power Supply AC 100-120V- 50/60Hz Connectivity HDMl input x 3 RF Antenna Input Google Cast LAN Output Headphones Output OPTICAL Output Data Interface USB Supported System Files FAT32 and FAT16 Mode 49GSR4100KM TV System ATSC Maximum 3840x2160 Brightness 280 cd/m2 Static Contrast 5000:1 Response Time 8 ms Consumption
Mode 55GSR4100KM TV System ATSC Maximum 3840x2160 Brightness 300 cd/m2 Static Contrast 6000:1 Response Time 6 ms Consumption 150W Power Supply AC 100-120V- 50/60Hz Connectivity HDMl input x 3 RF Antenna Input Google Cast LAN Output Headphones Output OPTICAL Output Data Interface USB Supported System Files FAT32 and FAT16 Mode 65GSR4100KN TV System ATSC Maximum 3840x2160 Brightness 350 cd/m2 Static Contrast 6000:1 Response Time 6 ms Consumption 250W Power Supply AC 100-12
Mode 75GSR4100KL TV System ATSC Maximum 3840x2160 Brightness 400 cd/m2 Static Contrast 5000:1 Response Time 6 ms Consumption 300W Power Supply AC 100-120V- 50/60Hz Connectivity HDMl input x 3 RF Antenna Input Chromecast built-in LAN Output Headphones Output OPTICAL Output Data Interface USB Supported System Files FAT32 and FAT16 Remote Control Signal Type Infrared Control Distance 8 meters Control Angle 30° (Horizontal) Power Supply AAA 1.
