User manual

Instruction manual
|
PS100 Mobile Storage System
17
11. Storage and downtime maintenance
1. Charging to maximum capacity
Fully charge the power supply unit prior to long-term storage. Charge the power supply unit at least once every
three months and store the power supply unit only in a dry and dust-free environment which is out of reach of
children. Suitable storage temperature: -20 to 40°C (-4 - 104 °F). Keep out of direct sunlight. Make sure that
the unit rests on a stable surface.
2. System shutdown
If the system shuts down automatically because of lower battery capacity, please recharge it.
3. Cleaning
Wipe away any dirt using a damp cloth.
ATTENTION
Gasoline, thinner, kerosene, petroleum, etc. have the characteristics of solvents.
Do not use.
4. Failure
Failure to maintain your PS100 by following these steps can result in battery damage which will void the pro-
duct warranty.
12. Service life of lithium ion batteries
Charge, supply current between 0 and 40°C (32 - 104 °F). Store between -20 and 40°C (-4 - 104 °F).
Using the battery at temperatures outside the lower and upper limits reduces the battery‘s running time.
Do not connect a continuous load of more than 100 W.
The unit‘s output stops automatically in case of overloading, since it reduces the running time of the battery.
Do not continue to charge the battery after it has charged completely.
Pay attention to the indicated capacity. Do not charge the battery once it has been fully charged or the charging
process has been concluded. Otherwise the service life of the lithium battery may be reduced.
Switch off the unit if it is not being used.
Unnecessary power consumption also reduces the running time of the lithium battery.
Fully charge the battery prior to placing it in storage.
Fully charge the power supply unit prior to lengthy periods of non-use for storage and recharge the unit at least
once a year. After prolonged storage, it may be necessary to charge and discharge the battery several times in
order to reach full capacity.