Operating Manual CCD Camera Models ST-7E, ST-8E, ST-9E, ST-10E, ST-1001E

Section 2 - Introduction to CCD Cameras
Page 7
Host Computer
Clock
Drivers
Preamp
16 Bit
A/D
Micro-
controller
Tracking CCD
Imaging CCD
Shutter
TE Cooler
PC
Interface
Telescope
Interface
Desktop
Power
Supply
Parallel Interface
Figure 2.2 - CCD System Block Diagram
As you can see from Figure 2.2, the ST-7E, ST-8E, ST-9E, ST-10E and ST-1001E are completely
self contained. Unlike our previous products, the ST-7E, ST-8E, ST-9E, ST-10E and ST-1001E
contain all the electronics in the optical head. There is no external CPU like the ST-5C, ST-237,
ST-6 and STV.
At the "front end" of any CCD camera is the CCD sensor itself. As we have already
learned, CCDs are a solid state image sensor organized in a rectangular array of regularly
spaced rows and columns. The ST-7E, ST-8E, ST-9E and ST-10E use two CCDs, one for
imaging (Kodak KAF series) and one for tracking (TI TC211, like the ST-4/4X). Table 2.1 below
lists some interesting aspects of the CCDs used in the various SBIG cameras.
Camera CCD
Array
Dimensions
Number of
Pixels Pixel Sizes
Tracking CCD TC211 2.6 x 2.6 mm 192 x 164 13.75 x 16 µ
ST-5C TC255 3.2 x 2.4 mm 320 x 240 10 x 10 µ
ST-237 TC237 4.7 x 3.6 mm 640 x 480 7.4 x 7.4 µ
STV TC237 4.7 x 3.0 mm 320 x 200 14.8 x 14.8 µ
ST-6 TC241 8.6 x 6.5 mm 375 x 242 23 x 27 µ
ST-7E KAF0401E 6.9 x 4.6 mm 765 x 510 9 x 9 µ
ST-8E KAF1602E 13.8 x 9.2 mm 1530 x 1020 9 x 9 µ
ST-9E KAF0261E 10.2 x 10.2 mm 512 x 512 20 x 20 µ
ST-10E KAF3200E 14.9 x 10.0 mm 2184 x 1472 6.8 x 6.8 µ
ST-1001E KAF1001E 24.6 x 24.6 mm 1024 x 1024 24 x 24 µ
Table 2.1 - Camera CCD Configurations