7” Swivel Screen Portable DVD Player DPA-00710S User’s Manual 20070105
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USE-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric to persons.
have been made. CAUTION: These servicing instructions are for use by qualified service personnel only. To reduce the risk of electric shock, do not perform any servicing other than that contained in the operating instructions unless you are qualified to do so. Refer to service manual for servicing instructions. 1) Read these instructions. 2) Keep these instructions. 3) Heed all warnings. 4) Follow all instructions. 5) Do not use near water. 6) Clean only with dry cloth.
Note: Do not touch the color TFT LCD screen by hand directly. Copyright Protection This product incorporates copyright protection technology that is protected by U.S. patents and other intellectual property rights. Use of this copyright protection technology must be authorized by Macrovision, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision. Reverse engineering or disassembly is prohibited. IMPORTANT FOR LASER PRODUCTS 1. CLASS 1 LASER PRODUCT 2.
Features High-quality audio and video AV Input: External Audio, Video input can be connected to most external AV sources. AV Output: Analog Audio output and video output. Excellent Sound: Dolby Decoder delivers great sound. Advanced Playing Functions Compatibility: Compatible with DVD, CD, CD-R, CD-RW, and Picture CD. On-screen Display: You can choose form English, Spanish, French, German or Italian for the On-screen Display language.
Accessories Accessories List ITEM NAME User’s Manual QTY 1 Rechargeable Battery 1 Audio/Video Cable 1 Power Adapter 1 Car Adapter 1 NOTE Accessories and their parts numbers are subject to modification without prior notice due to improvements.
Contents Important Safety Instructions …………………………………………..1 Features …………………………………………...4 Accessories …………………………………………...5 View of Main Unit …………………………………………...7 View of Side Panels ……………………………………………9 View of Main Unit Bottom …………………………………………..10 Revolving LCD Screen …………………………………………..11 System Connections …………………………………………..12 Power Supply Preparation …………………………………………..14 About the Rechargeable Battery …………………………………………..15 Notes on Discs …………………………………………..
View of Main Unit 1. 2. 3. LCD Screen Speaker Mode button Press to change the brightness, contrast and color level, press and hold for 1-2 seconds to change the aspect ratio. 4. -/+ button Press to adjust the value of brightness, contrast and color. 5. ZOOM button Press to realize various zoom effects. 6. Setup button Press to enter the player’s system setup. 7. MENU button Press to display or cancel the menu. 8. TITLE button Press to display the title menu if it exists in the disc. 9.
View of Main Unit 11. 12. 13. 14. 15. 16. 17. 18. 19. 20. 21. 22. ENT button Press to access playback, or confirm your selection. ◄/ button Press to select different options, or to return to the previous list or the previous track or chapter. If it is a DVD disc, it needs to press this button twice to return to the previous track. ▼/ button Press to select different options, or to search backward fast. A-B Repeat button Press to play a certain selected segment repeatedly.
View of Side Panels Right Side View 1. 2. 3. 4. 5. 6. Volume Control Used to adjust the volume of the headphone and speaker. Headphone Jack Used to connect headphones for private listening. When the headphones are connected to this jack, the speaker will be turned off automatically. Audio Output Jack Used for audio output. Video Output Jack Use for connecting to an external monitor or video source. AV IN/DVD Switch Switch to AV IN to input the external AV source; switch to DVD to play the disc. DC 9.
View of Main Unit Bottom 1. Rechargeable Battery Contacts For connecting the rechargeable battery pack. 2. Docking Jack This portable DVD player is equipped with a Docking Jack. The Docking Jack is designed for connecting to external Docking Station to get more expanded functions. Docking Station is a set of electrical connection interface that enables a portable DVD to effectively serve as a desktop DVD.
Revolving LCD Screen Revolving Steps The revolving LCD screen is one of the outstanding features about this product. We’d like to suggest you to take the following steps for proper operation. A 1. Open the screen cover to position (A) as shown in the left figure at which the screen is vertical to the operation panel. B 2. Revolving the screen horizontally around it’s axis in the clockwise only. The maximum revolving degree is 180 (position C).
System Connections z z Always ensure that the DVD player, TV and any other electrical equipment to be connected with are switched off and unplugged from the power supply. Ensure that you observe the color coding when connecting audio and video cables. Connecting to TV Audio/Video connections Follow the drawings below to connect the DVD player to TV's Audio/Video inputs with Audio/Video cables. Connecting to Amplifier Refer to your Audio equipment's manual before connection.
System Connections Connecting to External AV Signal Source This player can be connected to an AV signal input source such as a video cassette player, video game etc. Use the audio/video cable to connect the player and the external AV signal source. After connecting, switch the AV IN/DVD switch to AV IN. Ensure that you observe the color coding when connecting audio and video cables. NOTE: Noise may occur in speakers when input external audio signal while playing a DVD disc.
Power Supply Preparation Using the AC Adapter The player is supplied with an AC adapter for powering the unit and charging the battery. 1. Connect AC adapter to the right side of the DVD player in the jack marked DC 9.5V IN, as shown on the right. 2. Plug the two-prong end of the power cord into a grounded electrical outlet. The power indicator lights red. Note: Turn player's power off before unplugging.
About the Rechargeable Battery About Rechargeable Battery Pack Your portable DVD player comes with a lithium ion rechargeable battery that attaches to the rear of the DVD player. Charge the battery fully before initial use. Charging time is normally about 5 hours. A fully charged battery delivers about 3 hours of use, but playing time varies from disc to disc. If the battery will not be used for a long period of time, fully charge the battery prior to storage.
About the Rechargeable Battery Attaching the Battery Pack Refer to the following steps to attach the Battery Pack: 1. Place the DVD Player on a soft and smooth surface with the bottom of the unit facing up. 2. With one hand on the DVD Player to prevent it from moving, take the battery and align the plastic tabs on the battery pack with holes on the player, and push the battery pack into the DVD Player. 3. Slide the Battery Pack until you hear it click.
About the Rechargeable Battery Detaching the Battery Pack If the DVD Player is not going to be used for long periods of time, the battery pack should first be fully charged and then detached. When the DVD Player is turned OFF, the DVD Player is still consuming some power in STANDBY mode. This will eventually discharge the battery. Make sure the power is turned OFF and the AC or car adapter is disconnected before detaching the Battery Pack. To detach the Battery Pack: 1. 2.
Notes on Discs Compatible Disc Formats DISC LOGO DIAMETER 12cm DVD 8cm PLAYBACK TIME/ PLAYABLE SIDES 133 min (SS-SL) 242 min (SS-DL) 266 min (DS-SL) 484 min (DS-DL) 41 min (SS-SL) 75 min (SS-DL) 82 min (DS-SL) 150 min (DS-DL) 12cm 74 min 8cm 20 min CD JPEG 12cm Operation methods of some DVD discs are specified by the software manufacturer. Please refer to the instructions of those discs.
Playback Operation PLEASE READ THE FOLLOWING INSTRUCTIONS CAREFULLY BEFORE USING YOUR DVD PLAYER FOR THE FIRST TIME. WARNING: Do not play poor-quality discs to avoid damaging the lens. Pre-operation 1. Connect the unit to power supply through the provided AC adaptor. 2. Switch “POWER ON/OFF” to “ON” on the left panel to turn on the DVD player. 3. Push OPEN button on the unit to open the disc tray cover, put a disc in the disc tray with printed side facing up. Close the disc cover. (See below) 4.
Playback Operation DVD Playback Buttons Operation Play PAUSE/ button button Zoom button A-B Button Press ENT button to start playing. Press button to pause during play, then press it again to resume normal play. During playback, press button once to stop playing, then press button to resume normal playback from the stopped point. Press it twice repeatedly to stop playback completely. Then when you press button, the player will play from the beginning.
Playback Operation DVD Playback (continued) TITLE button Press TITLE button during play. The title menu will appear on the screen. Press (direction buttons) to select the title or disc menu item you wish to play, then press ENT button to confirm your selection. MENU button Press MENU button during play. The root menu will appear on the screen. Press (direction buttons) to select the item you wish to play, then press ENT button to confirm your selection.
Playback Operation CD Playback When a CD disc is loaded, the player will play it automatically by the default sequence of the disc. You can use , or number buttons to select a certain track to play. PAUSE/ button & buttons A-B button & buttons During playback, press button once to pause the playback, then press it again to resume playback. During playback, press button once to stop playback. Then press button, the player will resume playback from the stopped point.
Playback Operation Picture CD Playback Pre-operation 1. Load a Picture CD in the disc tray, the player will search for disc automatically. 2.The screen displays the Root Folder with several subdirectories/subfolders. Use , buttons to select a desired folder. Then press ENT button on the front panel to confirm your selection. 3.The screen enters the selected subfolder with several pictures. Use , buttons to select the desired picture. Then press ENT button on the front panel to confirm your selection. 4.
Playback Operation Picture Rotate During browsing a picture, you can use direction buttons , , to rotate the current picture.
System Setup You can change the default settings of this unit to customize its performance to your own preference. Read this section to learn how to set up the system. Note: the system should only be set up in the state that no disc is in the DVD drive or the unit is in the completely stop mode. Follow the steps below to set up your system: 1.Press the SETUP button. The setup menu will appear on the screen. It includes language setup and preferences.
System Setup 2. AUDIO This item is used to set the audio output language. Press or button to highlight this item. Press to enter the setup of this item. There are several languages for you to choose. English by default. Press or button to choose the preferred Language. Press ENT to confirm your selection. Press to exit from this item. 3. DISC MENU This item is used to set the menu language. Press or button to highlight this item. Press to enter the setup of this item.
System Setup Preferences 1.TV DISPLAY This item is used to set TV display mode. Press button to enter the setup of this item. It includes 4:3 PS (default), 4:3 LB and 16:9,. Press or button to choose the proper one. Press ENT to confirm your selection. Press to exit from this item. Note: Select 4:3 PS or 4:3 LB when a 4:3 TV is connected. Select 16:9 when a 16:9 wide screen TV is connected. 2.
System Setup 3. RESUME This item is used to set last memory state. Note: The last memory is referred to the state that if you press PWR button, or open the disc tray cover by accident but still keep the disc in during playback, then when you start playback again, the player will begin playing from where you are left off. Press or button to highlight this item. Press to enter the setup of this item. The default setting of this item is ON. Press or button to choose on or off.
Definitions Letterbox screen This refers to a screen on which the playback picture of wide-screen DVDs appears with black bands running along the top and bottom. Pan & Scan screen This refers to a screen on which the playback picture of wide-screen DVDs is cut off at the left and right sides. Title, Chapter (DVD) DVDs are divided into some large sections (titles) or some small sections (chapters). Each section is numbered: these numbers are called "Title number" or "Chapter number".
Troubleshooting Take steps described in the tables below to solve simple problems before contacting after-sales service. If You Suspect Something Wrong, immediately turn the power off. Disconnect the power connector and check that there is neither smoke nor heat from the unit before asking for repairs. Never try to repair the unit by yourself because it is dangerous to do so. PROBLEM The player cannot play. POSSIBLE CAUSE The disc cover may not be closed. Close the disc cover.
Troubleshooting PROBLEM There is no picture. Poor AV performance. POSSIBLE CAUSE POSSIBLE SOLUTION The LCD may be off or not be in correct video mode. Turn on the LCD and choose the correct video mode. The system connection may be not correct. Connect correctly. The unit may be not in AV out mode. Switch AV tab on the bottom of the unit to out. The disc may be dirty or warped. Clean or change the disc.
Specifications TFT screen size 7 inches Laser Wavelength 780/650 nm Video System NTSC Frequency Response ±2.5dB 20Hz～20kHz Audio Signal-to-noise Rate ≥85dB Audio distortion+noise ≤－70dB (1kHz) Channel Separation ≥70dB (1kHz) Dynamic Range ≥80dB (1kHz) Audio Out Analog Audio Out Video Out Video Out 0.2 Output Level: 1.5V±1.0 , Load: 10KΩ Output Level:1VP-P±0.
