DVD Player DVP 0600 Operation Manual -1-
Contents Important Safety Instructions ---------------------------------------------------------------------3 Features ------------------------------------------------------------------------------------------------ 4 About Discs -------------------------------------------------------------------------------------------- 5 Care of Discs --------------------------------------------------------------------------------------------6 Elements of Operation----------------------------------------------------------
Important Safety Instructions WARNING: To reduce the risk of fire or electric shock, DO NOT expose this product to rain or moisture. The lighting flash with arrowhead symbol within a triangle alerts the user to “dangerous voltage” which could cause electric shock. The exclamation point within a triangle alerts the user to read important operating and maintenance instructions in the manual. IMPORTANT FOR LASER PRODUCTS CLASS 1 LASER PRODUCT NOTES 1.
Features DUAL COMPATIBILITY ■ VIDEO OUT Supports both “Progressive scan” and Standard “Interlaced” televisions. PAL/NTSC shift. Video, S-Video and easy Progressive Scan creates a picture signal ■ AUDIO OUT with a 2CH and 5.1CH analog audio output, conventional DVD, resulting in higher optical and coaxial digital audio output picture resolution and sharper image can be connected to any amplifiers. double the scan lines of quality.
About Discs Disc Formats Supported by this Player The unit can play discs bearing any of the following logos: DISC LOGO DVD DIAMETER 12cm PLAYBACK TIME/ PLAYABLE SIDES 133 min SS-SL 242 min SS-DL 266 min DS-SL 484 min DS-DL 12cm 74 min 8cm 20 min MP3 12cm 600 min DIVX 12cm CD The operating method of some DVD discs is specified by the software maker. Please refer to the instruction manual of the disc.
Care of Discs How to hold discs Cleaning Care When loading or removing discs, try not Use a soft, dry cloth for cleaning. For to touch their playing surfaces. stubborn dirt, soak the cloth in a detergent solution; ring well first and wipe. Use a dry cloth to wipe it dry. Do not use any volatile agents such as benzine or paint thinner, as they may damage the surface of the player.
Elements of Operation – Front Panel 1. Standby-on button -Press to turn off the power. 2. Remote sensor -Receiving remote control signal for operation. 3. Display panel -Indicates the current status of the unit. 4. Disc tray -Used to load disc 5. EJECT button -Press to open/close the disc tray. 6. PLAY button -Press to begin the playback of the inserted disc. Display Panel -7- 9. 7. STOP button -Press to stop playback. 8. PREV button -Press to select the previous track or menu page. 9.
Rear Panel 1. 5.1CH Audio output jacks 6. Video output jack 2. 2CH Audio output jacks 7. 3. Coaxial digital audio output jack 4. Optical digital audio output jack 5. S-video output jack Component (Y/Y, Pb/Cb, Pr/Cr) output jacks 8. Switch between progressive and interlace scan 9.
Remote Control Handset Button Functions 1. Power 5. -Press to turn the DVD player on or off. -Used corporately with 0-9 number 2. Angle buttons to select the track number more -Press to access various camera angles than nine numbers. (if the DVD contains multiple camera 6. Menu angles). -Press to display/close the disc menu 3. Audio -Press 10 on the TV screen in Play mode. to access various audio languages (if the DVD contains multiple audio languages). 7.
Remote Control Handset Button Functions 9. Pause/Step 19. Title -Press to pause playback or step frame -Press to display titles if present on the by frame. DVD disc. -Press PLAY button to resume normal 20. Enter playback. -Press to confirm after selection. 10. Reverse 21. Zoom -Press to search backward. -When a DVD disc is playing, press this 11. Forward button to activate zoom. -Press to search forward. 22. Stop 12.
Usage of the Remote Control Battery Installation Insert the batteries ● Do not mix old and new batteries. supplied while observing the correct (+) and ( ) polarities. ● Wipe away any leakage inside the remote control unit, and install new batteries. ● If leakage should come into contact with your skin, immediately wash it off thoroughly with water. ● Batteries contain chemical substances and we recommend that you dispose of them properly and in compliance with any local regulations.
Connections Do not connect the power cord until all other connections have been made. Audio Connection: There are stereo audio output and coaxial digital audio output; Video Connection: there are video output and S-video output. You can choose anyone to connect. Connecting to a TV The connection is shown as following: 1. In this figure, there are VIDEO OUT and S-VIDEO OUT. If the TV has S-VIDEO IN jack, you can achieve more vivid picture by connecting this jack. 2.
Connections 3. Y Cb Cr video connection If a display device with Y/Cb/Cr jacks is connected, then you should connect the jacks with three Y/Cb/Cr cables: 1) Press the SETUP button to access the setup menu. 2) Press the up/down direction buttons to select “VIDEO OUTPUT” in “PREFERENCES”. 3) Select “YPBPR/YCBCR” in “VIDEO OUTPUT”, then press the ENTER button to confirm. IMPORTANT: Y/Cb/Cr uses interlacing. Please move switch on the rear panel to the location of “interlace” setting. 4.
Connections Connecting to an Analog Amplifier - 14 -
Connections Connecting to an Amplifier with 5.1 CH Audio Output Audio Connection: To experience the best possible sound from your DVD player, you should use the 5.1 channel audio connections. To do this, connect the 5.1 CH AUDIO OUT jacks on the DVD player to the corresponding AUDIO IN on your amplifier. Ensure that each channel is connected correctly. For example, the subwoofer output from the DVD player must be connected to the subwoofer input on your amplifier.
Connections Connecting to an Amplifier with Dolby Digital Decoder If the amplifier has Dolby Digital decoding function, set the output format of digital audio signal in setup menu to “SPDIF/RAW”. An optical digital audio cable or coaxial audio cable (both optional) is required for these connections, as shown above. Only one connection is needed, not both at the same time.
Disc Play Operations Preparation After connection, turn on the power of relevant equipment and select video input. 1. Turn on the player’s power Press the EJECT button on front panel to turn on the power and the player will search for the disc automatically. If there is a disc in, the player will play it. 2. Press the EJECT button on front panel or the OPEN/CLOSE button on remote control to open the disc tray. 3.
Disc Play Operations Subtitle The DVD player can support up to 32 kinds of subtitles. When you play a multi-subtitle disc, press the SUBTITLE button on remote control to select different subtitle. Angle The DVD player supports multi-angle function. Multi-angle means that a scene is shot from different angles so that audience can watch from any angle. If there are multiple angles in a scene, you can use the ANGLE button to select the angle you like to enjoy.
Disc Play Operations JPEG Playback JPEG is a common picture format that has few bytes and low loss rate of picture. Hundreds of pictures can be stored in a disc in this format. In order to realize real digital album, use film to make”PICTURE CD”, namely JPEG format. 1. Normal Playback Load a JPEG disc in. After reading the disc, the display may show “SMART NAVI” and “ROOT” (the left is the menu of last level and the right is the menu of next level).
Playback Functions Stop During playback, press the STOP button on remote control to stop playback. For DVD discs, after pressing the STOP button once, if you press the PLAY button, then the player will play from the stopped point. Pause Press the PAUSE/STEP button on remote control to pause, and press it repeatedly to achieve step-by-step playback. Repeat 1. Use the REPEAT button to repeat a title, a chapter, a track and a disc respectively according to different discs, and also to cancel repeat. 2.
Playback Functions Program Playback Use the PROGRAM button to activate program playback of CD discs. Operation steps: 1. Press the STOP button on remote control to stop playback. 2. Press the PROGRAM button to enter program status. 3. The player display may show “PROGRAM P00:00”. Use number buttons to input your favorite song numbers. 4. Press the PLAY button to begin the program playback. Zoom Function Use the ZOOM button on remote control to activate zooming out and zooming in function.
System Setup SETUP MENU Press the SETUP button on the remote control to display a main menu: GENERAL SETUP, SPEAKER SETUP, AUDIO SETUP and PREFERENCES. Operation steps: 1. Press the SETUP button to enter the main menu. 2. Use the ▲, ▼ direction button to select the item you want to set and press the ENTER button to enter it. 3. Similarly use the ▲, ▼ direction button to choose one item in submenu, use the ► button to enter it. 4. Use the ▲, ▼ direction button to choose the content as you wish.
System Setup SPEAKER SETUP 1. DOWNMIX (LT/RT, STEREO and 5.1CH) Selecting “LT/RT” in the “DOWNMIX” will alter the audio output into a mixed Dolby output. By selecting “STEREO” in the “DOWNMIX”, the player will output a normal stereo signal. By selecting “5.1CH” in “DOWNMIX” will alter the setup of center and rear speakers. 2. CENTER, REAR and SUBWOOFER (ON and OFF) Allows you to select “ON” or “OFF” for the center, rear and subwoofer. Only when DOWNMIX is in “5.
System Setup PREFERENCES You can set preferences for the following features: 1. TV TYPE (MULTI.SYSTEM, NTSC & PAL) You can select relevant system depending on your connected TV type. It is originally set in NTSC. 2. VIDEO OUTPUT (S-VIDEO, YPBPR/YCBCR & RGB) You can choose the appropriate video output. 3. AUDIO, SUBTITLE and DISC MENU (ENGLISH, FRENCH, SPANISH, CHINESE & JAPANESE) There are several audio, subtitle and disc menu languages in some DVD discs.
Troubleshooting Symptom Check Item to See If: The player cannot play. -disc tray is closed. -disc is loaded. -disc is dirty or warped. If it is, clean it or press it. -the player’s region code is the same as region code of DVD disc. -water condensation has occurred. If it has, remove disc and leave player on for several hours. There is no sound. -system connection is correct. -the speakers are plugged in. -the sound setup of DVD disc is correct. -disc is dirty or warped. If it is, clean it or press it.
Specifications Laser Wavelength Wavelength: 780/650nm Video System PAL/MULTI/NTSC Frequency Response 20Hz 20kHz ±2.5dB Audio Signal-to-noise Rate ≥85dB Audio distortion + noise ≤-70dB Channel Separation ≥70dB 1kHz Dynamic Range ≥80dB 1kHz Audio Out 1kHz Analog Audio Out Out Level: 2V±0.2 1.0 , Digital Audio Out Out Level: 0.5VP-P, Load: 75Ω Out Level:1VP-P±0.2, Load:75Ω Video Out Video Out S-Video Out Load: 10kΩ Unbalanced Negative Out Level: Y: 1VP-P, C: 0.
