5"/ 38cm HD-Ready LCD Television FLA-1512B 20060508
CONTENTS INSTRUCTION MANUAL.................................................................................................. 2 PACKING LIST.................................................................................................................. 4 GENERAL INTRODUCTION............................................................................................. 4 REMOTE CONTROL......................................................................................................... 8 INSTALLATION ....
Polaroid. Add a little color to your life. Since 1937, people have turned to Polaroid for their photography needs. Today, families look to Polaroid for consumer electronics that define the digital age: plasma and LCD TVs, portable and standard DVD players, digital cameras. And while our selection has changed, you’ll still receive the same friendly, helpful service. Congratulations on your new Polaroid LCD TV purchase.
Product Information Keep your sales receipt to obtain warranty parts and service and for proof of purchase. Attach it here and record the serial and model numbers in case you need them. These numbers are located on the back of your LCD color television. Model No. Serial No. Purchase Date: Dealer/Address/Phone: Instruction Manual IMPORTANT SAFETY INSTRUCTIONS 1. 2. 3. 4. 5. 6. 7. Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions.
PACKING LIST LCD TV Operation Manual Power Adapter AC Power Cable Infrared Remote Control Remote Control Battery Warranty Card Quick Start Guide AV Cable 1 1 1 1 1 2 1 1 1 Note: Please keep the original box and packaging for transporting the set in the future. GENERAL INFORMATION Radio Frequency input; supports CATV Capable of receiving cable programs in 470MHz, it can store 236 TV channels AV input Convenient for watching a DVD player, VCR, video camera or other playback devices.
Blue background with noise reduction In AV S-VIDEO and YPbPr modes, screen displays soft blue background if there is no signal input Multi Language On-Screen Display menu Text and graphical user interface makes the menu operation user-friendly Power Energy Saving Mode (Power management mode) When used as PC display terminal without PC signal output, the LCD TV will automatically power off within 30 seconds and enter Power Energy Saving Mode.
INTRODUCTION Front Panel The button names and functions are as follows: Panel buttons Button SOURCE MENU VOLVOL+ CH- CH+ Description To switch between TV, AV, S-Video, YPbPr and PC signal sources. The same function as SOURCE on R/C (remote control) in menu operation. To enter or quit from the OSD (On-Screen Display) menu. The same function as MENU on R/C To decrease the sound volume. Adjust functions in menu operation. The same function as Vol- on the R/C To increase the sound volume.
Rear Panel Headphone Output Detail Illustration of Signal Input Ports RF 7
Remote Control Power On/Off Signal Source Switch Channel Number Picture Mode Selection Return to last viewed program Sound Mode Selection Channel Up Volume Up Volume Down Channel Down On-screen Display Menu Screen Size Mode Selection Show Info of Current Program Sleep Timer Sound Mute On/Off Note: 1. When in operation, point the remote control directly at the infrared sensor. 2. Do not subject the remote control to impacts, water or disassembly. 3.
INSTALLATION 1. Remove the LCD TV from the box and place it on a flat surface in a well-ventilated location. 2. Connect the output terminal of RF cable to the corresponding TV RF signal input terminal. The LCD TV is a high technology digital product, use quality RF cables to obtain optimal results. 3. Connect the output terminal of the AV devices such as DVD player, VCR, etc. to the corresponding terminal of your LCD TV. 4.
Menu Operation 1. Use the On Screen Display menu to set and adjust functions 2. Use 【CH+】/【CH-】 to select the desired menu after pressing【MENU】, then press【VOL+】 【OK】 / to enter the corresponding menu and use 【CH+】 【CH-】 / to choose from the menu option; Use 【VOL+】/【VOL-】to adjust the options value and return to the previous menu by pressing 【MENU】again. The menu will disappear without any operation within 10 seconds.
Ⅲ Setup ● Language To select the language displayed. ● Blue Back In this mode, a blue background will appear when there is no signal input. ● Program Lock In the submenu of Program Lock, the Enter Password menu appears (this menu will appear when you switch to a channel after it was locked once);. Input the default password of 1235, the submenu of Program Lock will be displayed if the password is correct. (a) When changing the password, the password will be updated after four digits are input twice.
● Prog. Swap (submenu) Swap between two programs and their channels. This can be done by pressing Switch button after two different channels are selected.
● Color System To set the color system of the current program and use【VOL+】/【VOL-】to switch between PAL, NTSC,N4.43, SECAM and Auto systems. ● Sound System To switch between B/G,D/K,I, and M sound systems. ● Skip Skipping the unwanted program can dramatically quicken program selection. 1. Turn Skip on, pressing【CH+】/【CH-】can not select this program. 2. Input the program number directly to locate the program. Note: There is only Color System for the Tune Menu in AV, S-VIDEO signal sources.
● Auto Adjust To automatically adjust the picture position, clock, phase and color temperature to a preset optimum value. This mode is invalid in DOS mode. Note: The PC Setup menu is only available in the PC signal source. Other Functions ● Volume Control 1. Press【VOL+】 to increase or【VOL - 】to decrease the volume when there is no menu on the screen. The Volume bar will disappear if there left idle for more than 6 seconds. 2. Press the【MUTE】button on the remote control to turn On/Off the MUTE mode.
● Channel Switch Use the number buttons to choose the desired channel directly or press【CH+】/【CH-】 on the panel or 【CH+】/【CH-】 on the remote control to select the channel number. If a channel number is in SKIP ON mode, the next channel will be displayed. A maximum of 3 digits can be keyed in at one time with the number button on the remote control. The symbol of “ - - ” on the upper-right corner represents tens and one respectively..
TROUBLESHOOTING Before calling a technician, please check the following table to see if the below mentioned symptoms can be diagnosed and fixed. Symptoms Possible Reasons No picture, no sound, and no indicator light on No picture, no sound, but the green light indicator No picture, no sound, but the yellow light indicator 1. The power cord is not plugged in 2. The power is off 1. Plug the power cord in 2. Turn on the power Functions of ON/OFF TIME and SLEEP have been set Press【 1.
SPECIFICATIONS FLA-1512B Items Size (diagonal) Brightness Contrast Angle of View Speed Response Lamp Life Recommended Pixel Pitch Number of Dots Viewable Area Color Display Specifications Color System Sound System PC Qualified Input Format 38cm/15.0 inch 250 cd/m2 450:1 1200(H)/1000(V) 16 ms 50,000 Hours 1024 X 768 0.297mm(H) X 0.297mm (V) 1024XRGBX768 304.1mm(H) x 228.1mm (V) 16.
