- polaroid Owners Manual LCD Flat Panel TV FLM-1911

USING THE FEATURES

Turning the TV On and O

After connecting a CATV or antenna to your LCD TV, and turn the POWER SWITCH of rear TV

on, an amber LED light indicates when the LCD TV is activated.

2 Press the POWER button, the LED green light indicates on.

3 Press the POWER button, the LED amber light indicates o .

Select Source

Press the INPUT button to display the selection signal on the screen.

Select TV Channel

1 Press the CH+/- button on the remote control and the CHANNEL ▲/▼ button on the LCD

TV to select channel.

2 Press the 0~9 buttons then press the ENTER button to input the channel No. and enter into

the selection channel No.

3 Press the JUMP button on the remote control to swap the channel between the current

channel No. and the previous channel No.

Adjusting the Volume

Press the VOL +/– button on the remote control or the VOLUME +/- button on the LCD TV to

adjust the volume.

To Mute the Sound

1 Press MUTE and the sound cuts o .

2 To turn mute o , press the MUTE button again, or simply press the VOL +/- buttons.

Sleep Timer

Press the SLEEP button continuously to select the sleep timer or turn the sleep timer from the

OFF,15,30,45,60,90 and 120 minutes; when the LCD TV has been reached the set time, it will

automatically turn o . If the TV has no input signal, the screen will appeared blue screen and

display NO Signal; The TV will automatically change stand by after 15 minutes.

USING THE FEATURES

Basic Operation