FCC Federal Communications Commission Statement 1. Reorient/Relocate the receiving antenna. 2. Increase the separation between the equipment and receiver. 3. Connect the equipment into an outlet on a circuit which is different from what the receiver is connected to. 4. Consult the dealer or an experienced radio/TV technician for help. Changes or modifications not expressly approved by the manufacturer responsible for compliance could void the user authority to operate the equipment.
Warnings and Precautions Warnings and Precautions To prevent any injuries, the following safety precautions should be observed in the installation, use, servicing and maintenance of this equipment. Before operating this equipment, please read this manual completely, and keep it nearby for future reference. This symbol is intended to alert the user to avoid the risk of electric shock. This equipment must not be disassembled by anyone except qualified service personnel.
Warnings and Precautions ▪ Use and handle the power cord with care. Do not place any heavy objects on the AC power cord. ▪ Do not touch the power cord and antenna cable during lightning. ▪ Remove the plug from the wall outlet, if the equipment will not be used for a long period of time. ▪ Do not place, use or handle this equipment near water. ▪ Never expose the equipment to liquid, rain, or moisture. Seek for service if any of the above is spilled into the equipment.
Warnings and Precautions Outdoor Antenna Safety Instructions If an outdoor antenna is connected, follow the precautions below: ▪ An outdoor antenna should not be located in any area where it could come in contact with overhead power lines, or any other electric light or power circuits. ▪ When installing an outdoor antenna system, extreme caution should be taken to prevent contact with power lines. Direct contact with power lines may be fatal and should be avoided at all costs.
TABLE OF CONTENTS Federal Communications Commission Statement .......................... 1 Important Safety Instructions ....................................................................................... 2 Antenna Safety Instructions ......................................................................................... 4 Chapter 1 Introducing the LCD TV Key Features ............................................................................................................... 6 Package Contents ..
Chapter 1 Introducing the LCD TV Chapter 1 Introducing the LCD TV Key Features Various Audio/Video terminals for external equipment connection ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ 2 set of composite A/V input terminals 1 set of S-VIDEO terminals 2 set of component Video input terminals 1 VGA/ Audio input terminal 1 HDMI/Auido input terminal 1 sets of Audio(L/R) output terminals 2 SPDIF output terminal (Optical x 1 /Coaxial x 1) 1 Headphone terminal The built-in TV tuner to receive HD ATSC ▪ This function allows the reception
Chapter 1 Introducing the LCD TV Package Contents LCD TV Bottom Stand / Screw Driver and 6 Screws Remote Control/ AA Batteries x 2 VIDEO Cable Power Cord AUDIO Cable Component Cable Warranty Card Quick Start Guide User’s Manual These items are all you need to set up and operate the LCD TV in its basic configuration. Make sure all of the above contents are included in the package. If you are missing any items, please contact the Polaroid customer service department.
Chapter 1 Introducing the LCD TV Setting Up Your LCD TV Attach the Stand If you prefer to mount your new Polaroid TV on a wall instead of attaching it to the stand, please reference the instructions included in the wall mounting kit (not included). IMPORTANT : Attach the Stand to the TV with the bottom foam packaging material still attached. Read all instructions before continuing with the stand installation. a) Lift foam packaging material from the top of the TV out of the box.
Chapter 1 Introducing the LCD TV Connect the AC power cord at the back of the TV and connect the power cord to wall outlet. Insert the 2 batteries supplied in remote control. Step1 Slide the back cover up to open the battery compartment of the remote control. Step2 Insert two AA size batteries. Make sure to match the (+) and ( - ) ends of the batteries with the (+) and ( - ) ends indicated in the battery compartment. Slide the cover back into place.
Chapter 1 Introducing the LCD TV Your LCD TV Front/Right Side View and Controls LED The LED light indicates when the LCD TV is activated. IR Infrared Receiver VOLUME▲▼ Adjusts the volume up and down. Selects the main-menu item and change values for items when in the OSD mode. VIDEO1 IN VIDEO L Connects to the composite Video and Audio output jacks on external video equipment. AUDIO R CHANNEL▲▼ Scans up and down through channels. Selects sub-menu item when in the OSD mode.
Chapter 1 Introducing the LCD TV Rear View and Jacks ENGLISH VIDEO2 IN Connects to the composite VIDEO and AUDIO(L/R) output jacks on external video equipment. HDMI IN Connects the all digital AV equipment with HDMI connector.HDMI supports enhanced, high-definition video and two-channel digital audio. The AUDIO(L/R) of HDMI IN is for DVI connection. S-VIDEO IN Connects to the S-VIDEO and AUDIO(L/R) output jacks on external video equipment.
Chapter 1 Introducing the LCD TV Your Remote Control This package includes a Polaroid remote that enables control of up to four devices. To select a device, simply select one of the following device mode controls: TV, CBL/SAT, DVD/VCR, or AUDIO. Turns the LCD TV on and off. 1 2 1 3 4 2 SET Remote control universal code setup.For more information on setting up your remote control, please see the “Programming Your Remote Control” section. 3 TV Controls this LCD TV.
Chapter 2 Installing the LCD TV MENU Displays the OSD menu on the screen. 12 INFO Pressing once displays a variety of information such as the current channel and the input source. 13 ▲▼►◄,OK Cycles through OSD options and selects individual menu items. OK confirms option settings. OK In HDTV mode, pressing OK to display a digital channel list. 14 GUIDE In HDTV mode, pressing GUIDE displays the Program Guide on the screen. 15 EXIT Exits the OSD menu.
Chapter 2 Installing the LCD TV Chapter 2 Installing the LCD TV Refer to the owner’s manual of any external equipment to be connected. When connecting any external equipment, do not connect any AC power cords to wall outlets until all other connections are completed. Connecting a TV Cable or an Antenna Antenna Connection The antenna requirements for good color TV reception are more important than those for a black & white TV reception.
Chapter 2 Installing the LCD TV Use one of the following two diagrams when connecting an outdoor antenna. A: Shows how to use a VHF/UHF combination outdoor antenna. B: Shows how to use a separate VHF and/or UHF outdoor antenna. ENGLISH A. Combination VHF/UHF antenna VHF/UHF Antenna 300/75-ohm adapter (not included) 300-ohm twinlead cable VHF/UHF Antenna 75-ohm coaxial cable B.
Chapter 2 Installing the LCD TV Cable TV (CATV) Connection This reminder is provided to call the CATV system installer’s attention to Article 820-40 of the National Electrical Code (NEC) that provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building accurately, or as close to the point of cable entry as possible.
Chapter 2 Installing the LCD TV METHOD A: Use a supplied antenna cable to connect the NTSC signal to the LCD TV’s TV CABLE terminal. ENGLISH TV CABLE HDTV AIR VHF/UHF IN B A METHOD B: Use a supplied antenna cable to connect the ATSC signal to the LCD TV’s HDTV AIR terminal. Connect the AC power cord at the back of the TV and connect the power cord to wall outlet. TV CABLE HDTV AIR VHF/UHF IN This TV is equipped with a safety fuse.
Chapter 2 Installing the LCD TV Connecting a VCR Rear of TV HDMI IN VGA IN AUD IO OUT YPbPr1 IN AUD IO AUD IO Y Pb Pr STEREO AUD IO DIGITAL OPTICAL L R L R L Y Pb Pr R TV CABLE HDTV AIR L COAXIAL AUD IO VHF/UHF IN VIDEO L AUD IO VIDEO2 IN R L R S-VIDEO AUD IO S-VIDEO IN L R R YPbPr2 IN AUDIO Cable S-VIDEO Cable AV Cable A B METHOD A: Use a composite cable to connect the VCR’s composite video/audio jacks to the LCD TV’s VIDEO2 IN jacks.
Chapter 2 Installing the LCD TV Connecting a Video Camera or Play Station Rear of TV HDMI IN ENGLISH Right Side VGA IN AUD IO OUT VIDEO YPbPr1 IN AUD IO AUD IO Y Pb Pr STEREO AUD IO DIGITAL OPTICAL L AUDIO R L R L R L Y Pb Pr R TV CABLE HDTV AIR L COAXIAL AUD IO VIDEO1 IN VHF/UHF IN VIDEO L R AUD IO VIDEO2 IN L R S-VIDEO AUD IO S-VIDEO IN L R R YPbPr2 IN AUDIO Cable or S-VIDEO Cable PLAY STATION B AV Cable A METHOD A: Use a composite cable to connect the video camera
Chapter 2 Installing the LCD TV Connecting a DVD Player Rear of TV HDMI IN VGA IN AUD IO OUT YPbPr1 IN AUD IO AUD IO Y Pb Pr STEREO AUD IO DIGITAL OPTICAL L R L R L Y Pb Pr R TV CABLE HDTV AIR L COAXIAL AUD IO VHF/UHF IN VIDEO L AUD IO VIDEO2 IN R L R S-VIDEO AUD IO S-VIDEO IN L R R YPbPr2 IN or Pb Pr COMPONENT/AUDIO Cable AUDIO Cable S-VIDEO Cable AV Cable A B C Pb Pr D V D PLA YER METHOD A: Use a composite cable to connect the DVD player’s composite video/audio jac
Chapter 2 Installing the LCD TV Connect all AC power sources, before turning on the power switch of the LCD TV or other connected equipment. button on the remote to turn on the LCD TV. To watch a DVD, press the Input button on the remote to select VIDEO2( METHOD A), or VIDEO3 ( METHOD B), or VIDEO4/VIDEO5 (METHOD C). For best picture quality, if your equipment has component video output, use a component cable instead of a composite video or S-video cable.
Chapter 2 Installing the LCD TV Connecting a Digital TV Cable Box or Digital Satellite Receiver Rear of TV HDMI IN VGA IN AUD IO OUT YPbPr1 IN AUD IO AUD IO Y Pb Pr STEREO AUD IO DIGITAL OPTICAL L L R R L Y Pb Pr R TV CABLE HDTV AIR L COAXIAL AUD IO VHF/UHF IN VIDEO L AUD IO VIDEO2 IN R L R S-VIDEO AUD IO S-VIDEO IN L R R YPbPr2 IN or Pb Pr COMPONENT/AUDIO Cable Pb Pr Use a component cable to connect the satellite receiver’s/TV Cable Box’s component (YPbPr1) output jacks
Chapter 2 Installing the LCD TV Connecting an AV Equipment with HDMI Connector Rear of TV ENGLISH HDMI IN VGA IN AUD IO OUT YPbPr1 IN AUD IO AUD IO Y Pb Pr STEREO AUD IO DIGITAL OPTICAL L R L R L Y Pb Pr R TV CABLE HDTV AIR L COAXIAL AUD IO VHF/UHF IN VIDEO L AUD IO VIDEO2 IN R L R S-VIDEO AUD IO S-VIDEO IN L R R YPbPr2 IN HDMI Cable AV EQUIPMENT Use a HDMI cable to connect the AV equipment’s HDMI output jack to the LCD TV’s HDMI IN jacks.
Chapter 2 Installing the LCD TV Connecting an AV Equipment with DVI Connector Rear of TV HDMI IN VGA IN AUD IO OUT YPbPr1 IN AUD IO AUD IO Y Pb Pr STEREO AUD IO DIGITAL OPTICAL L R L R L Y Pb Pr R TV CABLE HDTV AIR L COAXIAL AUD IO VHF/UHF IN VIDEO L AUD IO VIDEO2 IN R L R S-VIDEO AUD IO S-VIDEO IN L R R YPbPr2 IN AUDIO Cable AUD IO L HDMI-to-DVI Cable R DVI IN AV EQUIPMENT Use a HDMI-to-DVI cable to connect the AV equipment’s DVI output jack to the LCD TV’s HDMI IN jac
Chapter 3 Using the LCD TV Connecting a PC Rear of TV ENGLISH HDMI IN VGA IN AUD IO OUT YPbPr1 IN AUD IO AUD IO Y Pb Pr STEREO AUD IO DIGITAL OPTICAL L R L R L Y Pb Pr R TV CABLE HDTV AIR L COAXIAL AUD IO VHF/UHF IN VIDEO L AUD IO VIDEO2 IN R L R S-VIDEO AUD IO S-VIDEO IN L R R YPbPr2 IN AUDIO Cable VGA Cable PC Use a D-SUB cable to connect the PC’s D-SUB output jack to the LCD TV’s VGA input jack. Use an audio cable to connect the PC’s audio output jacks to LCD TV’s.
Chapter 3 Using the LCD TV Connecting an Audio Receiver or a Dolby Digital 5.1 Sound System For better sound quality, you may want to play the LCD TV audio through your stereo system.
Chapter 3 Using the LCD TV Chapter 3 USING THE FEATURES ENGLISH Using Picture-In-Picture The PIP/POP feature allows simultaneous viewing of video from two sources (TV, VCR, DVD etc). Only one source’s audio is played at a time; the user may select which source’s audio is heard. NOTE: Picture-in-Picture/Picture-on-Picture do not work when both picture sources are coming from component input (YPbPr). Press the PIP button once to enter picture in picture mode.
Chapter 3 Using the LCD TV Press the PIP button again to view images side by side. Main Sub ▪ Press ◄ ► to toggle the audio source between the main window and the sub window. ▪ Press the OK button to swap the pictures between the main and sub windows.
Chapter 3 Using the LCD TV Wide Screen Viewing NORMAL Displays at 4:3 aspect ratio. FULL Stretches the image vertically and horizontally to keeps the image size consistent in the center of the screen and stretches the sides WIDE Stretches the image vertically and horizontally to fill the screen at 1:1.85 aspect ratio. ZOOM Stretches the image vertically and horizontally to fill the screen at 1:2.35 aspect ratio.
Chapter 3 Using the LCD TV Operating the Menu Press the button to turn the LCD TV on. Press the MENU button on the remote control,the on-screen menu will appear on the screen. Use the ◄► buttons to select your main menu option. VIDEO MENU: Allows you to make adjustments to your picture settings.
Chapter 3 Using the LCD TV SETUP MENU: Allows you to set up a variety of features: Language, Closed Caption, factory reset, V-Chip, Parental Control sleep timer. Setup ENGLISH Language Timer Closed Caption V-Chip Parental Default English 15 off Select Exit TV MENU: Allows you to edit and label channels. Searching Tuner Mode Channel Skip Channel Name TV Cable-STD On Select Exit HDTV MENU: Allows you to set up the HDTV program function.
Chapter 3 Using the LCD TV Setting up the HDTV Function Automatically scans and stores all the TV channels With the LCD TV connected to a television programming source, press the TV button on the remote control. Press the MENU button on the remote control to display the Main menu, and use the ◄► buttons to select the HDTV.
Chapter 3 Using the LCD TV The HDTV menu includes the following options: Allows to select the audio language: English/Spanish/French. Time Zone Allows selection of regional TV systems of USA: Eastern Time/Indiana/ Central time/Mountain Time/Arizona/Pacific Time/Alaska/Hawaii SPDIF Type Allows to selection of the digital sound format: PCM/OFF/Dolby Digital Auto Scan Automatically sets up channel list on TV for all receivable channels. Manual Scan Allows to set up TV channel manually.
Chapter 3 Using the LCD TV Using the Program Guide The Program Guide feature brings all sorts of information provided by the cable TV company to your screen, such as program title, program duration, time remaining, rating information, closed caption, availability, etc. With the LCD TV connected to a television programming source, press the TV button on the remote control.
Chapter 3 Using the LCD TV Customizing the VIDEO Settings button to turn the LCD TV on. Press the MENU button on the remote control to display the Main menu, and use the ◄► buttons to select the VIDEO.
Chapter 3 Using the LCD TV Customizing the AUDIO Settings Press the button to turn the LCD TV on. Press the MENU button on the remote control to display the Main menu, and use the ◄► buttons to select the AUDIO.
Chapter 3 Using the LCD TV Customizing the SETUP Settings button to turn the LCD TV on. Press the MENU button on the remote control to display the Main menu, and use the ◄► buttons to select the SETUP. Use the ▲▼buttons to highlight an individual SETUP option, use the ◄► buttons to change the setting, and press the MENU to exit the menu.
Chapter 3 Using the LCD TV Allows to select from 4 closed caption modes: ▪ CC1 /CC2 /CC3 /CC4: Display a printed version of the dialog and sound effects of the program being viewed. ▪ T1/T2: Display station information presented using either half or the whole screen. ▪ T3/T4: Extended Data Services. For example: Network name, program name, program length, etc. NOTE: For better viewing CC in text mode will have a black box behind the text.
Chapter 3 Using the LCD TV Using the V-CHIP Settings Use the ▼ button to select the V-Chip, and press the OK to display the V-Chip menu. Block MPAA Rating Block TV Rating Block MPAA Unrated Block TV None Rating No No Use the V-CHIP function, must enter a four-digit password. The factory preset password is 0000. This password must be used first before setting your own personal password. It is recommended that you keep your personal password in a safe place and away from children.
Chapter 3 Using the LCD TV The TV GUIDELINE has 2 rating methods: Content-Based Rating and Age-Based Rating.
Chapter 3 Using the LCD TV Using the Parental Settings Use the ▼ button to select the Parental, and press the OK to display the Parental menu. Channel Lock Video Lock Change Password Setup 1 VIDEO5(YPbPr2) Select Exit Use the V-CHIP function, must enter a four-digit password. The factory password is 0000.
Chapter 3 Using the LCD TV Customizing the TV Settings Press the button to turn the LCD TV on. Press the MENU button on the remote control to display the Main menu, and use the ◄► buttons to select the TV. Use the ▲▼buttons to highlight an individual TV option, use the ◄► buttons changes the setting, and press the MENU exits the menu.
Specifications SPECIFICATIONS Panel Size FLX-3202 32’’ TFT LCD Brightness 550 500 Contrast Ratio 1000:1 800:1 Max. Resolution Input Connector FLX-2602 26’’ TFT LCD 1366x768 1366x768 VIDEO/AUDIO(L/R) 2 2 S-VIDEO/AUDIO(L/R) 1 1 YPbPr/AUDIO(L/R) 2 2 VGA/AUDIO(L/R) 1 1 HDMI/AUDIO(L/R) 1 1 AUDIO OUT(L/R) 1 1 OPTICAL/COAXIAL 1 1 1 1 HEADPHONE Power Source AC100~240V, 50/60HZ, 2.2A AC100~240V, 50/60HZ, 2.
Specifications MODEL LCD Panel Panel Size Brightness 500 Contrast Ratio 1000:1 Max. Resolution Input Connector FLX-3702 37’’ TFT LCD 1366x768 VIDEO/AUDIO(L/R) 2 S-VIDEO/AUDIO(L/R) 1 YPbPr/AUDIO(L/R) 2 VGA/AUDIO(L/R) 1 HDMI/AUDIO(L/R) 1 AUDIO OUT(L/R) 1 OPTICAL/COAXIAL 1 HEADPHONE 1 Power Source AC100~240V, 50/60HZ, 3.0A Power Consumption 275 W, standby < 8 W Dimension 36.6 w x 28.2 h x 9.
Chapter 4 Programming your Remote Control Introduction Your remote lets you control four devices with one easy-to-use, compact unit. After installing batteries, you can program the remote to control your Universal TV, VCR or DVD, Cable or Satellite Receivers, Amplifier or Tuner, and Auxiliary devices. To do so, follow the instructions in “Programming a Device”. For best results, please read and follow all the remaining instructions. Keep this guide for future reference.
2. 3. 4. 5. 6. Press and hold SET until the red LED blinks twice; then release. Enter 9-9-0. The LED blinks twice. To view the code for the first digit, press 1. Count the LED blinks (for example, three blinks = 3), and write down the number in the appropriate code listing in step 8 under “Programming a Device”. • NOTE: If a code digit is 0, the LED does not blink.
MANUFACTURER’S CODES Set Codes for Audio Amplifiers Bose GE JVC Marantz Nakamichi NEC Optimus Realistic Sansui Shure Sony Soundesign Victor Wards Yamaha 30674 30078 30331 30321 30321 30264 30395 30395 30321 30264 30689 30078 30331 30078 30354, 30133 Set Codes for Audio Amp/Tuners ADC Aiwa Anam Audiotronic Bose Capetronic Carver Coby Denon Fonmix Glory Horse Harman/Kardon Hitachi Inkel Integra JBL JVC Kenwood KLH Magnavox Marantz MCS Onkyo Optimus Panasonic Philips Pioneer Proscan Qisheng Quasar RadioShack
Set Codes for Cable Converters ABC Americast Bell & Howell Bell South Clearmaster ClearMax Coolmax Daeryung Digi Director Dumont Gehua General Instrument GoldStar Hamlin Hitachi Jerrold KNC LG Memorex Motorola MultiVision Pace Panasonic Panther Paragon Philips Pioneer Pulsar Quasar RadioShack Regal Runco Samsung Scientific Atlanta Sony Starcom Supercable Supermax Tocom Torx Toshiba Trans PX Tristar TS V2 Viewmaster Vision Vortex View Zenith 00003, 00008, 00014 00899 00014 00899 00883 00883 00883 01877, 0
Harman/Kardon Hitachi Integra JVC Kenwood Krell Linn Magnavox Marantz MCS Miro Mission MTC NSM Onkyo Optimus Panasonic Parasound Philips Pioneer Polk Audio Proton QED Quad Quasar RadioShack RCA Realistic Rotel SAE Sansui Sanyo SAST Sharp Silsonic Sonic Frontiers Sony Soundesign TAG McLaren Tascam Teac Technics Victor Wards Yamaha Zonda 30157, 30173 30032 30101 30072 30826, 30626, 30028, 30037, 30036, 30190 30157 30157 30157 30626, 30029, 30157 30029 30000 30157 30420 30157 30868, 30101 31063, 30000, 30032,
Emerson Enterprise Fisher Funai Gateway GE Go Video Greenhill Harman/Kardon Hitachi Hiteker Initial Integra JBL JVC Kenwood KLH Koss Lasonic LG Liquid Video Lite-On Loewe Magnavox Marantz Memorex Microsoft Mintek Mitsubishi Nesa Norcent Onkyo Oritron Panasonic Philips Pioneer Polaroid Polk Audio Portland Proscan Qwestar RCA Rio Rotel Sampo Samsung Sansui Sanyo Sharp Sharper Image Sherwood Shinco Shinsonic Sonic Blue Sony SVA Sylvania Symphonic Teac Technics Theta Digital Toshiba Urban Concepts Xbox Yamaha Z
Set Codes for Satellite Receivers AlphaStar Chaparral Crossdigital DirecTV 00099, 01392, Dish Network System Dishpro Echostar Expressvu GE General Instrument GOI Goodmans Hisense Hitachi HTS Hughes Network Systems I-Lo JVC LG Magnavox Memorex Mitsubishi Motorola NEC Next Level Panasonic Paysat Philips Proscan Proton RadioShack RCA Samsung Sanyo SKY Sony Star Choice Tivo Toshiba UltimateTV Uniden US Digital USDTV Voom Zenith 00772 00216 01109 00392, 00566, 00639, 01142, 00247, 00749, 01749, 00724, 00819, 01
Audiovox Baile Beijing Bell & Howell BenQ Bradford Broksonic Cailing Candle Carnivale Carver Celebrity Celera Changcheng Changhong Ching Tai Chun Yun Chung Hsin Cinema Citizen Commercial Solutions Conrowa Contec Craig Crosley Crown Curtis Mathes CXC Daewoo Dayu Dell Denon Dumont Durabrand Electroband Emerson 11911 Envision Ether Firstar Fisher Fortress Fujitsu Funai Furi Futuretech Gateway GE Gibralter GoldStar Grunpy Haier Hallmark Hankook Harley Davidson Harman/Kardon Harvard Havermy Helios Hello Kitty Hi
Imperial Crown Infinity Inteq JBL JCB Jean Jensen Jiahua Jinfeng Jinxing JVC Kangli KEC Kenwood KLH Kolin KTV Kunlun LG Lloyd’s LXI Magnasonic Magnavox Magnin Marantz Matsushita Maxent Megapower Megatron Memorex MGA Midland Mitsubishi Monivision Motorola MTC Mudan Multitech NAD National NEC Newave Nikko Norcent NTC Onwa Optimus Optonica Orion Panasonic Panda Penney Philco Philips Pilot Pioneer Portland Prima Princeton Prism Proscan Proton Pulsar Qingdao Quasar RadioShack 10661 10054 10017 10054 10000 10156
RCA 10090, 10679 Realistic Rowa Runco Sampo Samsung 10766 Sansui Sanyo Sanyuan Scotch Scott Sears Shaofeng Sharp Shen Ying Shencai Sheng Chia Skygiant Skyworth Sony Soundesign Sowa Squareview SSS Starlite Studio Experience Supreme SVA Sylvania Symphonic Synco Tacico Tandy Tashiko Tatung Technics Techwood Teco Teknika Telefunken Tera Thomas Tiane TMK TNCi Tobo Toshiba Tuntex TVS V Inc.
ABS Admiral Aiko Aiwa Alienware America Action American High Amoisonic Anam Anam National Asha Audiovox Beaumark Bell & Howell Broksonic Calix Canon Carver CCE Changhong Citizen Colt Craig Curtis Mathes Cybernex CyberPower Daewoo Dell Denon DirecTV Durabrand Electrohome Electrophonic Emerex Emerson 20479 Fisher Fuji Fujitsu Gateway GE General Go Video GoldStar Haojie Harman/Kardon Harwood Hewlett Packard HI-Q Hitachi Howard Computers HP Hughes Network Systems iBUYPOWER JVC KEC Kenwood KLH Kodak Kolin LG Log
Matsushita Media Center PC MEI Memorex MGA MGN Technology Microsoft Mind Minolta Mitsubishi Motorola MTC Multitech NEC Newave Nikko Noblex Northgate Olympus Optimus Orion Panasonic Penney Pentax Philco Philips Pilot Pioneer Polk Audio Profitronic Proscan Protec Pulsar Qisheng Quasar Radix Randex RCA Realistic ReplayTV Runco Sampo Samsung Sanky Sansui Sanyo Scott Sears Sharp Shintom Shogun Singer Sonic Blue Sony STS Sylvania Systemax Tagar Systems Tashiko Tatung Technics Teco Teknika Tivo TMK Toshiba 20035,
Totevision Touch Unitech Vector Vector Research Victor Video Concepts Videomagic Videosonic Viewsonic Wards White Westinghouse XR-1000 Yamaha Zenith ZT Group CARE • • • • 20037, 20240 21972 20240 20045 20038 20067 20045 20037 20240 21972 20060, 20035, 20048, 20047, 20081, 20240, 20042, 20072 20209, 20072 20035, 20072 20038 20039, 20033, 20209, 20479 21972 Keep the remote dry. If it gets wet, wipe it dry immediately. Use and store the unit only in normal temperature environments.
