User manual

Make sure the batteries have been inserted properly into your digital camera.

Use 3x AAA (1.5V) batteries. Alkaline batteries are recommended. Batteries not included.

1) Open the battery compartment door.

2) Insert the batteries according to the battery polarities shown below.

3) Close the battery compartment door securely.

 Remove the batteries from the camera when not in use for an extended period.

 Do not mix alkaline and non-alkaline batteries.

 When the battery power is low the battery icon turns red and the camera will

automatically turn off a few seconds later.

 Some features will not work if the battery power level is low.

 The energy status of the battery power level is displayed on LCD screen as shown

below:

Full battery power Medium battery power Low battery power

Make sure an SD Memory card has been properly inserted into your camera. SD card not

included. Class 4 SD Memory card or higher is recommended. To properly insert the SD Card:

1) Locate the SD Memory card slot on the camera. Slide the SD card into the slot in the

direction shown on the camera (see SD icon by the SD card slot).

2) Push the SD card until you hear a slight clicking sound. This indicates the SD card has been

inserted correctly.