© 2015 All Rights Reserved. Windows and the Windows logo are registered trademarks of Microsoft Corporation. All other trademarks are the property of their respective companies.
1
Thank you for purchasing this digital camera. Everything you need to take quality digital photos and videos is included with your digital camera. Polaroid makes capturing those special moments as easy as possible. Please read this manual carefully first in order to get the most out of your digital camera. Note: Your camera requires a Class 4 SD Memory Card or higher - up to 32GB - for normal use. SD Memory cards are not included and need to be purchased separately.
1. Power Button 12. Left / Scene Button 2. Shutter Button 13. Flash 3. LCD Screen 14. Focus Lamp 4. Busy LED Light Indicator 15. Optical Lens 5. Zoom In Button 16. Tripod Socket 6. Zoom Out Button 17. Battery Compartment 7. MODE Button 18. Wrist Strap Connector 8. SET (Menu/OK) Button 19. SD Memory Card Slot 9. Up / Flash / Slide Show Button 20. Buzzer 10. Right / Delete Button 21. Microphone 11. Down / INSTA Share Button 22.
Insert 3 x AAA (1.5V) batteries. Alkaline batteries recommended (not included). 4 SD Memory card (up to 32GB) needed for normal use. Important: You must use a Class 4 or higher SD Card only.
Make sure the batteries have been inserted properly into your digital camera. Use 3x AAA (1.5V) batteries. Alkaline batteries are recommended. Batteries not included. 1) Open the battery compartment door. 2) Insert the batteries according to the battery polarities shown below. 3) Close the battery compartment door securely. Remove the batteries from the camera when not in use for an extended period. Do not mix alkaline and non-alkaline batteries.
2) Push the SD card until you hear a slight clicking sound. This indicates the SD card has been inserted correctly. Note: After the camera is powered on, an SD icon will appear on the LCD display. If you do not see the SD icon on the display, please check if the card was inserted properly. Make sure the SD card is not locked (check the lock switch on the side of the SD card). If the SD card is locked this will prevent the camera from saving captured photos to the SD card.
After powering the camera ON for the first time the camera will take you through the initial camera setup. 1) You will first be prompted to select a language for the camera. The Language selection menu will appear. Select the language of your choice by pressing the UP and DOWN direction control buttons. 2) Then press the SET button to confirm the selection. 3) After selecting a language, you will be asked if you would like to continue with the initial camera setup.
Next you will be asked to set the default INSTA Share destination for photos and videos taken with your camera. The INSTA Share technology allows you to quickly and easily upload your camera’s photos and videos to social networks with the accompanying software application. 1) First you will be asked to choose the default INSTA Share social network for Photos. Press the UP/DOWN button to highlight the desired default social network and then press the SET button to confirm the selection.
Your camera has different modes for the various camera functions. You can switch modes by pressing the MODE button on your camera after the camera has been powered ON. Use this mode to capture pictures with your camera. This is the default mode when the camera is powered ON. To take a picture, aim your camera as desired and press the Shutter button. The picture is automatically saved to your camera’s memory card.
Image Sensor CMOS Sensor 4608x3456 (16M), 4416x3312 (14M), 4000x3000 (12M), Image Resolution 3648x2736 (10M), 3264x2448 (8M), 3648x2048 (7MHD), 2592x1944 (5M), 2048x1536 (3M), 1920x1080 (2MHD), 640x480 (VGA) Video Resolution 1920x1080 (1080P), 1280x720 (720P), 640x480 (VGA), 320x240 (QVGA) File Format JPEG (Photo) /AVI (Video) Internal Memory 1 Test Photo only External Memory SD MMC SDHC (up to 32G)– SD Card not included LCD Display 2.4 Inch TFT LCD Lens f=6.0~48.0 , F3.0~4.
To be able to download photos and videos to your computer using the Polaroid Instant Memories Software, you will need the following minimum configuration: MICROSOFT® Windows XP with Service Pack 3, Windows Vista with Service Pack 1 or MICROSOFT® Windows 7 or above Pentium® 4 processor (or above) 1 GB RAM, 250 MB available hard disk space 16-bit Color monitor, 1024 X 768 recommended screen resolution CD-ROM Drive QuickTime® 6 or higher MICROSOFT ® Internet Explorer 7 or higher
Make sure the batteries have been inserted properly into your digital camera. If your camera model includes a lithium battery, make sure the battery has been fully charged before the first use. Make sure an SD card has been inserted into your camera. (SD card up to 32GB - SD Card not included) Please see Initial Camera Setup for more information. Press the Power button to turn your camera ON. After powering on, the camera emits a sound and the LED light turns on briefly.
Your camera has three main modes: 1) Photo Capture Mode - Use this mode to capture photos with your camera. 2) Video Capture Mode - Use this mode to capture videos with your camera. 3) Playback Mode (for photos and videos) - Use this mode to view the photos and videos you have already taken with your camera. When the camera is first powered ON, the Photo Capture Mode will be active.
Each camera mode has a set of menus specific to that mode. 1) Press the SET button to open the menus for the current mode. 2) Press the LEFT or RIGHT direction control button to scroll between the various menus for the current mode. 3) Press the UP or DOWN direction control button to highlight the desired menu selection. 4) Press the SET button to confirm and save the highlighted menu option.
The INSTA Share technology allows you to quickly and easily upload your camera’s photos and videos to the social networks of your choice with the accompanying Polaroid Instant Memories application. An INSTA Share destination can be assigned to a photo or video in Capture mode prior to capturing your image or in Playback Mode. Press the DOWN Quick Function Button to open the INSTA Share options. Select an INSTA Share option and press SET to save your selection and return to Photo/Video Capture Mode.
There are several Flash options available on your camera. The options appear on the Photo Capture Mode LCD screen in sequence. To change the Flash mode, press the UP Quick Function button until you arrive at the desired setting. Important: When using Flash, stand between 8 to 10 feet away from the scene you would like to capture. The MACRO mode must be turned OFF when you want to use the Flash. To change the Macro setting: Press SET to open the menus and scroll to the ‘Macro’ menu. Select ‘Off’.
MACRO ON: Your camera contains a MACRO feature that allows you to enable or disable the MACRO mode on your camera. While using the MACRO mode, you can capture images at close range (30~45cm). To turn the MACRO mode ON, open the Photo or Video Capture Mode Menu. Then select ‘ ON’ from the Macro menu options. When enabled, the MACRO mode allows your camera to focus on an object that is close to the camera. The flower icon appears on the LCD and indicates that the Macro mode is ON.
Note: The MACRO mode must be turned OFF when you want to use the following feature of your camera: Flash. The display of the icons on the LCD screen can be hidden or visible as desired. 1) Hold the MODE button for 2 seconds to hide the display of the icons on the screen. 2) Press the MODE button again to redisplay the icons on the screen.
The Photo Capture mode allows you to capture pictures with your digital camera. When the camera is first powered ON, the camera will be in Photo Capture Mode by default. 1) Selecting the Scene with the LCD Display: While in Photo Capture Mode, use the LCD display on the back of the camera to direct the camera at the scene you would like to capture. 2) Zoom Options: Press the T/Zoom In and W/Zoom Out buttons to zoom in/out if desired.
Your digital camera has a four-directional pad that functions as Quick Function buttons: Quick Function Button LEFT Function SCENE SELECTION – Opens the ‘Scene’ menu. FLASH OPTIONS – Toggles between the following Flash options: UP Forced Off, Forced On, A Auto Flash, Red Eye Reduction DELETE – Opens the ‘Delete This Photo’ option and allows you to view RIGHT and delete the last photo taken. INSTA SHARE – Opens the ‘INSTA Share for Photos’ menu DOWN Other Shutter SET Captures the photo.
The following are the menus that appear in your camera’s Photo Capture Mode: The Once you change a setting, the setting is saved by your camera until you manually change the selection icons below appear by the default settings. setting or restore the camera’s default factory settings.
The ‘Scene’ Menu allows you to choose scene settings that let your camera to adapt properly to your current environment. Note: When selecting the HIGH SENSITIVITY Option, by default the camera switches off the FLASH automatically (if it’s ON) to optimize the picture quality. If however, you would like to override it and manually turn ON the flash – you can do so. Remember: The ‘Scene’ menu is also accessible by pressing the LEFT Quick Function Button while in Capture Mode.
5) To continue within the menus and select a different menu option: Press the LEFT or RIGHT button to select the next menu item. 6) To exit the menu view: Press the MODE button to exit the menu and return to your previous mode. An icon reflecting your selection is displayed on the LCD screen. The ‘Image Quality’ menu allows you to select the desired quality level of the images taken by your camera. Keep in mind that images with a higher image quality level will also take up more memory on your camera.
2) Press the LEFT or RIGHT button to scroll and select the ‘Self Timer’ menu. 3) Press the UP or DOWN button to highlight a specific option. 4) Press the SET button to confirm and select the highlighted menu option. A 5) selected option icon appears on the selected item. To continue within the menus and select a different menu option: Press the LEFT or RIGHT button to select the next menu item. 6) To exit the menu view: Press the MODE button to exit the menu and return to your previous mode.
When enabled, the Macro mode will allow your camera to focus on an object that is close to the camera. MACRO OFF: To disable the Macro mode select ‘Off’. The mountain icon When Macro mode is off, images can be captured from 1.5m - ∞ (infinity). appears on the LCD display. Note: The MACRO mode must be turned OFF ( ) when you want to use the following feature of your camera: Flash. 1) Press the SET button to open the menus for the current mode.
5) To continue within the menus and select a different menu option: Press the LEFT or RIGHT button to select the next menu item. 6) To exit the menu view: Press the MODE button to exit the menu and return to your previous mode. An icon reflecting your selection is displayed on the LCD screen. The ‘Color Effect’ menu allows you to choose a color effect to add to the images taken with your camera. 1) Press the SET button to open the menus for the current mode.
A 5) selected option icon appears on the selected item. To continue within the menus and select a different menu option: Press the LEFT or RIGHT button to select the next menu item. 6) To exit the menu view: Press the MODE button to exit the menu and return to your previous mode. An icon reflecting your selection is displayed on the LCD screen. Using the ‘Image Sharpness’ menu you can set the level of sharpness in the images taken with your camera.
the positive + count) to increase the amount of light allowed into the lens by your camera. 1) Press the SET button to open the menus for the current mode. 2) Press the LEFT or RIGHT button to scroll and select the ‘Light Exposure’ menu. 3) Press the UP or DOWN button to highlight a specific option. 4) Press the SET button to confirm and select the highlighted menu option. A 5) selected option icon appears on the selected item.
The ‘Metering’ setting will affect how your camera focuses when capturing an image. Depending on your selection, the camera will be more sensitive to focusing on particular areas in the display and adjust the image color and lighting accordingly.
A 5) selected option icon appears on the selected item. To continue within the menus and select a different menu option: Press the LEFT or RIGHT button to select the next menu item. 6) To exit the menu view: Press the MODE button to exit the menu and return to your previous mode. When you capture an image with your camera, the image will include a time stamp with the date and time that the image was taken. The Date/Time menu allows you to set your camera’s date and time as desired.
4) The ‘Date Setup’ submenu will open. 5) Scroll through the window with the RIGHT and LEFT buttons. 6) For each field in the menu, use the UP and DOWN buttons to set the date and time. 7) When you have finished setting the date and time, press the SET button to save your settings and return to the previous mode. 8) Press the MODE button to exit the menu without saving your settings and return to your previous screen.
You can use the ‘Auto Power Off’ feature in order to conserve you camera’s battery life. The designated time represents when your camera will automatically power off. When the camera sits idle for the designated period of time, the camera will shut off completely and will need to be powered on again with the power button before the next use. 1) Press the SET button to open the menus for the current mode. 2) Press the LEFT or RIGHT button to scroll and select the ‘Auto Power Off’ menu.
You can use the ‘Format Memory Card’ menu to delete all of the content that is currently on your camera’s memory card. Keep in mind that formatting the memory card will permanently delete all of the content on your camera’s memory card. This option will delete all of the content at one time. If you would like to delete individual images, use the delete menu in the camera’s Playback mode. Note: Restoring factory defaults or formatting the camera may result in the loss of data.
• Select ‘No’ to exit the menu and return to the previous mode without resetting to the default settings. • Select ‘Yes’ and press the SET button to proceed with the reset. You will then automatically exit the menu and return to the previous mode with the digital camera settings set to the Factory Default Settings. Note: After RESETTING to the default settings, it is recommended to select your system Language, Date/Time and INSTA Share for Photos and Videos.
The Playback Mode allows you to review and edit photos and videos that you’ve already taken with your camera. When you first turn on the camera, the camera will be in Photo Capture mode by default. Press the MODE button twice to open the Playback Mode. The latest captured image appears on the LCD screen. If there are no images stored, a message (No File) appears.
To access the Thumbnail View: 1) Press the W / Zoom Out / button. All the images on your camera appear in the Thumbnail View. 2) Use the UP / DOWN / LEFT / RIGHT direction buttons to scroll and select the image you wish to view. 3) Press the SET button to enlarge the selected image full size. 4) Once the selected photo is full size you can Zoom In, Zoom Out and edit the photo. Your digital camera has a four-directional pad that functions as Quick Function buttons.
ZOOM - Zooms In to selected photo. T ZOOM - Zooms Out of selected photo. THUMBNAIL - Opens Thumbnail View. To navigate in the Thumbnail View press the / W UP/DOWN/LEFT/RIGHT direction buttons. To select an image in the Thumbnail View press the SET button.
While in the Playback Mode, you can delete pictures from your camera through the ‘Delete’ menu. 1) Select the photo you would like to delete. 2) Press the SET button to open the menus for the current mode. 3) Press the LEFT or RIGHT button to scroll and select the ‘Delete’ menu. 4) Press the UP or DOWN button to highlight a specific option. To delete the selected photo: Select “Delete This Photo” and press the SET button. You will be asked to confirm the deletion of the photo.
The INSTA Share technology allows you to quickly and easily upload your camera’s photos and videos to the social networks of your choice with the accompanying Polaroid Instant Memories application. Remember: You can also easily access the INSTA Share menu by pressing the INSTA Share (DOWN) button. 1) Select the photo you to which you would like to add an INSTA Share destination. 2) Press the SET button to open the menus for the current mode.
2) Press the SET button to open the menus for the current mode. 3) Press the LEFT or RIGHT button to scroll and select the ‘Rotate’ menu. 4) Press the UP or DOWN button to highlight a specific option. 5) Press the SET button to confirm and select the highlighted menu option. 6) The selected picture now appears rotated in the Playback Mode display. You can crop any picture on your camera with the Crop feature. 1) View the photo you would like to crop.
4) Press the UP or DOWN button to highlight a specific option. To Lock the Selected Image: To lock the selected image use the UP or DOWN button to highlight ‘Lock This Photo’ and then press the SET button. The image now appears in Playback Mode with the lock icon . To Unlock the Selected Image: To unlock the selected locked image use the UP or DOWN button to highlight ‘Unlock This Photo’ and then press the SET button. The image now appears in Playback Mode without the lock icon.
5) Select ‘Print This Photo’ and press the SET button to print the selected photo. 6) You will be asked to connect the camera to the Pictbridge printer. 7) Connect the USB cable provided in the package from the camera to the Pictbridge port of the printer. 8) Once connected, follow the instructions on the printer to proceed with the printing process. 9) Select the ‘Cancel’ option to exit the menu and return to the previous mode.
The Video Capture Mode allows you to capture videos with your digital camera. When the camera is first powered ON, the camera will be in Photo Capture Mode. Press the MODE button once to access the Video Capture Mode. 1) Selecting the Scene with the LCD Display: While in Video Capture Mode use the LCD display to direct the camera at the scene you would like to capture. 2) Zoom Options: Press the T/Zoom In and W/Zoom Out buttons to zoom in/out if desired before capturing the video.
Your digital camera has a four-directional pad that functions as Quick Function buttons. Quick Function Button Function LEFT SCENE SELECTION – Opens the ‘Scene’ menu. UP LIGHT EXPOSURE – Opens the ‘Light Exposure’ menu. RIGHT DELETE – Opens the ‘Delete This Video’ option and allows you to view and delete the last video taken. INSTA SHARE – Opens the ‘INSTA Share for Videos’ menu DOWN Other Shutter SET START/PAUSE – Starts and pauses the video capture. STOP – Stops the playing video.
The following are the menus that appear in your camera’s Video Capture Mode: The Once you change a setting, the setting is saved by your camera until you manually change the selection icons below appear by the default settings. setting or restore the camera’s default factory settings.
The ‘Scene’ menu allows you to choose scene settings that let your camera to adapt properly to your current environment. Note: Remember: The ‘Scene’ menu is also accessible by pressing the LEFT Quick Function Button while in Capture Mode. 1) Press the SET button to open the menus for the current mode. 2) Press the LEFT or RIGHT button to scroll and select the ‘Scene’ menu. 3) Press the UP or DOWN button to highlight a specific option.
6) To exit the menu view: Press the MODE button to exit the menu and return to your previous mode. An icon reflecting your selection is displayed on the LCD screen. The ‘Image Quality’ menu allows you to select the desired quality level of the images taken by your camera. Keep in mind that images with a higher image quality level will also take up more memory on your camera. 1) Press the SET button to open the menus for the current mode.
Note: The MACRO mode must be turned OFF ( ) when you want to use the following feature of your camera: Flash. 1) Press the SET button to open the menus for the current mode. 2) Press the LEFT or RIGHT button to scroll and select the ‘Macro’ menu. 3) Press the UP or DOWN button to highlight a specific option. 4) Press the SET button to confirm and select the highlighted menu option. A 5) selected option icon appears on the selected item.
The ‘Color Effect’ menu allows you to choose a color effect to add to the images taken with your camera. 1) Press the SET button to open the menus for the current mode. 2) Press the LEFT or RIGHT button to scroll and select the ‘Color Effect’ menu. 3) Press the UP or DOWN button to highlight a specific option. 4) Press the SET button to confirm and select the highlighted menu option. A 5) selected option icon appears on the selected item.
The ‘Light Exposure’ setting helps you control the amount of light that enters your camera’s lens. This setting should be adjusted when the environment is lighter or darker than normal. When the environment has more light than is needed, reduce the exposure setting (by using the negative - count) to reduce the amount of light allowed into the lens by your camera.
A 5) selected option icon appears on the selected item. To continue within the menus and select a different menu option: Press the LEFT or RIGHT button to select the next menu item. 6) To exit the menu view: Press the MODE button to exit the menu and return to your previous mode. An icon reflecting your selection is displayed on the LCD screen. The ‘Metering’ setting will affect how your camera focuses when capturing an image.
You can select your camera’s language setting by selecting the desired language from the ‘Language’ menu. 1) Press the SET button to open the menus for the current mode. 2) Press the LEFT or RIGHT button to scroll and select the ‘Language’ menu. 3) Press the UP or DOWN button to highlight a specific option. 4) Press the SET button to confirm and select the highlighted menu option. A 5) selected option icon appears on the selected item.
Press the LEFT or RIGHT button to select the next menu item. 6) To exit the menu view: Press the MODE button to exit the menu and return to your previous mode. To Set the Date and Time: 1) Press the SET button to open the menus for the current mode. 2) Press the LEFT or RIGHT button to scroll and select the ‘Date/Time’ menu. 3) Press the UP or DOWN button to highlight the ‘Date Setup’ menu option, then press the SET button to select the option. 4) The ‘Date Setup’ submenu will open.
The options in the ‘Frequency’ menu represent the frequency of the electrical current in fluorescent lighting sources in your locale. If your camera is set to a frequency that does not match your country’s electric current, you may see waves on the images taken by your camera. 50Hz – UK, Europe and Australia 60Hz – US, Canada and South America 1) Press the SET button to open the menus for the current mode. 2) Press the LEFT or RIGHT button to scroll and select the ‘Frequency’ menu.
- CANCEL: To exit without formatting the SD Memory Card, select ‘Cancel’ and press the SET button. - FORMAT: To proceed with the format, select “Yes” and press the SET button. You will be asked to confirm the formatting of the memory card. • Select ‘No’ and press the SET button to exit without formatting. • Select ‘Yes’ and press the SET button to begin the format. The memory card will be completely formatted.
The Playback Mode allows you to review and edit photos and videos that you’ve already taken with your camera. When you first turn on the camera, the camera will be in Photo Capture mode by default. Press the MODE button twice to open the Playback Mode. The latest captured image appears on the LCD screen. If there are no images stored, a message (No File) appears.
To access the Thumbnail View: 1) Press the W / Zoom Out / button. All the images on your camera appear in the Thumbnail View. 2) Use the UP / DOWN / LEFT / RIGHT direction buttons to scroll and select the image you wish to view. 3) Press the SET button to enlarge the selected image full size. 4) Once the selected video is full size you can play and view the video. Note: The camera does not have a speaker.
/ W THUMBNAIL VIEW – Opens the Thumbnail View. To navigate in the Thumbnail View press the UP/DOWN/LEFT/RIGHT direction buttons. To select an image in the Thumbnail View press the SET button. The following are the menus that appear in your camera’s Video Playback Mode: While in the Playback Mode, you can delete videos from your camera through the ‘Delete’ menu. 1) Select the video you would like to delete. 2) Press the SET button to open the menus for the current mode.
To delete all the images (videos and photos) you have saved on your SD Memory card: Select ‘Delete All Images’ and press the SET button. If you would like to proceed with deleting all the videos and photos, select ‘Yes’ and press the SET button to confirm. All of your images will be permanently deleted. A blank ‘No Files Exist’ screen will appear. Press the MODE button to exit the ‘No Files Exist’ screen. Remember: All images will be deleted except images that are Protected/Locked.
Note: An icon appears on the image with the selected INSTA Share destination site when you return to the Playback display. Remember that the INSTA Share feature is deactivated by default. An INSTA Share destination will only be assigned to a photo or video if you manually set it from this menu or from the INSTA Share menu in Capture mode (accessible with the INSTA Share Quick-Function DOWN button in Capture mode).
To Unlock All Images: To unlock all locked videos and photos use the UP or DOWN button to highlight ‘Unlock All Images’ and then press the SET button. The images now appear in Playback Mode without the lock icon. 5) Press the MODE button at any time to exit the menu and return to your previous mode. Note: Any image that is locked displays a lock symbol on the LCD screen when viewing that image in the Playback Mode. Videos that are not locked do not display the lock symbol.
You must be connected to the Internet to install and run the Polaroid Instant Memories software. 1) Insert the installation CD into your CD-ROM drive. The Polaroid Instant Memories Installer window appears. WINDOWS OS: If the window does not appear, open the application’s CD/DVD drive (AutoPlay window) and click on “runsetup.exe” to launch the installer. MAC OS: If the window does not appear, click the icon that appears on the desktop to install the Polaroid Instant Memories.
1) Use the supplied USB cable to connect your camera to your computer. Insert the smaller end of the USB cable into the USB interface of the camera. Insert the larger end of the USB cable into the USB port of your computer. 2) Power the camera ON. 3) ‘MSDC’ appears briefly on the camera’s LCD screen, indicating the camera is connected to your computer in MSDC mode. 4) The first time you connect the device to the computer you may have to wait a few seconds until the computer recognizes the device.
2) The “Get media from device” window opens. 3) You can select to download photos, videos or both. 4) Select your camera (removable disk) from the device window. If your camera is the only USB device connected then it will be selected automatically. 5) Select a location on the computer where to place the new photo and video files. 6) Add the new photo and video files to albums if desired. 7) Select to remove the media files from the selected device (removable disk) after the import.
1) Use the supplied USB cable to connect your camera to your computer. 2) MSDC appears on the LCD. 3) A window appears with a list of options, select “Open folder to view files” and click “OK”. 4) Open the DCIM folder and the folder inside to view the media files. 5) Select the media and copy the files from this folder into your computer. Optionally, select the files and choose “Copy” from the Edit menu. Then select a folder and choose “Paste” from the Edit menu.
Note: Please check your device packaging for compatibility with the iPad. For models that are compatible with the iPad, photos and videos can be imported from your digital camera to your iPad by following either one of the options below: 1) Connecting your digital camera to your iPad using an iPad Camera Connector: Plug the Camera Connector into the dock connector port on your iPad, and then attach your digital camera using a USB cable (included) to the Camera Connector.
This warranty covers the original consumer purchaser only and is not transferable. This warranty covers products that fail to function properly UNDER NORMAL USAGE, due to defects in material or workmanship. Your product will be repaired or replaced at no charge for parts or labor for a period of one year. Damages or malfunctions not resulting from defects in material or workmanship and damages or malfunctions from other than normal use, including but limited to, repair by unauthorized parties.
NO WARRANTIES, WHETHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, OTHER THAN THOSE EXPRESSLY DESCRIBED ABOVE SHALL APPLY. DISTRIBUTOR FURTHER DISCLAIMS ALL WARRANTIES AFTER THE EXPRESS WARRANTY PERIOD STATED ABOVE. NO OTHER EXPRESS WARRANTY OR GUARANTY GIVEN BY ANY PERSON, FIRM OR ENTITY WITH RESPECT TO THE PRODUCT SHALL BE BINDING ON DISTRIBUTOR.
For technical support issues please visit our website at www.polaroid.com. For further assistance, you can also call our technical support department toll free at 877-408-0033, or for e-mail support, please contact us at polaroid@sakar.com. Q: I have taken photos and selected the “Get Images” button. I get a message that the images were successfully transferred but the photos do not appear on my computer. What do I do? First ensure that you have in fact taken photos.
Disposal of Waste Electrical and Electronic Equipment and/or Battery by users in private households in the European Union. This symbol on the product or on the packaging indicates that this can not be disposed of as household waste. You must dispose of your waste equipment and/or battery by handling it over to the applicable take-back scheme for the recycling of electrical and electronic equipment and/or battery.
E-Waste - PLR IP Holdings, LLC, its licensees, affiliates, and Sakar International, Inc. fully supports all electronic waste initiatives. As responsible stewards of the environment, and to avoid violating established laws, you should properly dispose of this product in compliance with all applicable regulations, directives or other governances in the area where you reside.
