Quick Reference Guide

ManualsBrandsPolaroid ManualsCamerasPolaroid MiniPortrait 206

MiniPortrait 206 Camera

Quick reference

Setting up the camera

1 Ensure that the camera is set to the correct aperture for the film you are using.

2 Set the aiming light switch to “PP” for passport photos or “ID” for ID photos.

3 Load film into the camera.

4 Plug the small end of the AC power cord into the socket on the back of the

camera. Plug the other end into a grounded AC outlet. After about ten seconds,

the green Ready light will come on in the LED display.

11 16

22 32 44

PP ID

Film Speed Aperture

ASA 80 f11-1/2

ASA 100 f11-1/2

ASA 125 f16

ASA 3000 f64

Summary of content (4 pages)

PAGE 1
MiniPortrait 206 Camera Quick reference Setting up the camera 1 Ensure that the camera is set to the correct aperture for the film you are using. f 11 16 PP 22 32 44 64 ID Film Speed Aperture ASA 80 f11-1/2 ASA 100 f11-1/2 ASA 125 f16 ASA 3000 f64 2 Set the aiming light switch to “PP” for passport photos or “ID” for ID photos. 3 Load film into the camera. 4 Plug the small end of the AC power cord into the socket on the back of the camera. Plug the other end into a grounded AC outlet.
PAGE 2
Taking a picture 1 Load film into the camera. 2 Place your subject approximately 40 inches (1 meter) in front of the camera. 3 Press the Aiming Button and aim the lights at your subject. The lights blink while you aim the camera. Adjust the camera so that the lights converge on the subject's chin. See the opposite page for aiming tips. 4 If your subject has a dark complexion, press the Face Brightener (Boost) button. The Boost light will come on in the LED display.
PAGE 3
Aiming tips With the MiniPortrait 206 Camera, there is no need for a viewfinder. The aiming lights ensure that your subject's face will appear exactly where you want it in the picture. Just be sure that the subject is at the appropriate distance from the lens as shown below. Note: ID Images are not to scale. correct distance .
PAGE 4
Caution: This process uses a caustic paste. Do not allow the paste to contact skin, eyes, or mouth; keep it away from children and animals. If you get some paste on your skin, wipe it off immediately and wash the area with water to avoid an alkali burn. If eye or mouth contact occurs, quickly wash the area with plenty of water and see a doctor. Keep discarded materials away from children, animals, clothing and furniture.