8” Portable DVD Player PDM-0817 Operation Manual 20050128 1
Safety Instructions Warning: This indicates that "There is a risk of injury or death". Caution: This indicates that "There is a risk of injury or physical damage". Before operation Warning Read and keep the operation manual. Before using the the product, please carefully read this manual and follow all safety and operation instructions Keep this manual for future reference. Power supply: The power supply must correspond to the standard indicated on the product.
Safety Instructions Do not install the product in a position where it will interfere with the operation of an automotive air bag. The air bag may fail to operate properly or the product could become dislodged by airbag operation, causing an accident and/or injury. Do not expose the product to excessive heat. This could cause the product to start smoking or ignite, or cause electrical shock or other malfunction. Unplug all the equipment before connecting.
Safety Instructions This product has been listed as class 1 laser product. The mark is on the rear panel. The apparatus shall be connected to an AC power outlet with a protective grounded connection. Visible laser radiation when open and interlock failed or defeated. Avoid direct exposure to beam. Do not open the top cover while the unit is operating. There are no user serviceable parts inside the unit. Leave all servicing to qualified service personnel. Beware of unit falling or tipping over when moving.
Safety Instructions Caution Notes on discs: Do not play discs that are damaged or warped, including discs with cracks, scratches or parts missing; discs with burrs; poor quality discs. Route all cords so that they do not interfere with driving or with entering or exiting the car. Run the cords so that they do not wrap around the steering wheel, brake pedal, etc. or around your feet. Secure all the cords together. Use the product at the proper volume setting.
Safety Instructions Preservation and Cleaning Warning Do not use any volatile agents such as gasoline or paint thinners to clean the product. Never use any volatile materials to clean the product, because they may damage the surface of the player. Use a soft, dry cloth for cleaning. Store in a proper place Store the product in clean, dry place, avoid direct sunlight and moisture. Caution Unplug the product when not used for a long period of time.
Features High-quality audio and video AV In: External Audio, Video input can be connected to most external AV sources. AV Out: Analog Audio output and video output. Excellent sound: Dolby Digital delivers great sound. Advanced Playing Functions Compatibility: Compatible with DVD, CD and Picture CD disks. On-screen Display: You can choose from English, Spanish or French for the On-screen Display language. Particular Performance: Multi-speed, fast forward, fast backward and slow forward, slow backward.
Accessories Accessories List ITEM NAME Remote Control (with battery) QTY 1 Owner’s Manual 1 Rechargeable Battery 1 Audio/Video Cable 1 Power Adapter 1 Car Adapter 1 NOTE Accessories and their parts numbers are subject to change without prior notice.
Contents Safety Instructions …………………………………………..2 Features …………………………………………...7 Accessories …………………………………………...8 …………………………………………..10 View of Unit View of Side Panels ………………………………….……….12 View of Unit Bottom …………………………………………..13 Remote Control …………………………………………..14 System Connections …………………………………………..17 Power Supply Preparation …………………………………………..19 Rechargeable Battery …………………………………………..20 Notes on Discs …………………………………………..23 Playback Operation …………………………………………..
View of Unit Front View 1. TFT LCD 2. Speakers 7” color TFT screen presents a high resolution picture. 3. 4. 5. Two speakers output high quality stereo sound. TITLE button Press to display the disc title menu if the titles are coded in the disc. MENU button Press to enter to the disc menu. / , / buttons / : Press the direction buttons to select items. / : Press to fast search backward and forward during disc playback.
View of Main Unit 6. 7. 8. / , / buttons / : Press the direction button to select items. / : Press to play the previous track or the next track. ENT button Press to confirm your selection. MODE button Press to change the aspect ratio or change the brightness, contrast and color level. (See page 20) PLAY/PAUSE button Press to start playback or pause the playback. 10. STOP button Press to stop playback. Press the button to resume playback. 11. ZOOM button 9.
View of Side Panels Right Side View 1. 2. 3. 4. 5. 6. VOLUME Control For adjusting the sound level of speakers or headphones. Headphone Jack When headphones are plugged into the unit, the speakers automatically turn off. AUDIO input/output Jack For connecting to an external amplifier or audio source VIDEO input/output Jack For connecting to an external monitor or video source DVD/AV IN Switch Switch to AV IN to input the external AV source; switch to DVD to playback the disc DC 9.
View of Unit Bottom View of the bottom 1. Rechargeable Battery Contacts For connecting the rechargeable battery pack. 2. Docking Jack This portable DVD player is designed with a Docking Jack on the bottom. The Docking Jack is designed for connecting to an optional external Docking Station for expanded functions. The Docking Station features an electrical connection interface that enables the portable DVD to effectively serve as a desktop DVD.
Remote Control 1. 2. 3. 4. 5. 6. 7. 8. 9. PWR button Press to access standby mode or playback mode. INFO button Press to display the detailed information of the disc during playing. Press this button again to exit from the information display. TITLE button Press to display title menu if it exists in the disc. Direction buttons Press to select different options. ENTER button Press to access playback, or confirm your selection SETUP button Press to enter the player’s system setup.
Remote Control 10. SUBT button Press to select different subtitle languages if there are multiple subtitle languages existing in the disc. 11. ANGLE button Press to access various camera angles playback if the DVD disc contains multiple camera angles. 12. A-B Repeat button Press to play a certain selected segment repeatedly. 13. ZOOM button Press to realize various zoom effects. 14. REP button Press to repeat a chapter, a title, a track or the whole disc. 15. MENU button Press to display or cancel the menu.
Remote Control Installation Steps Follow the steps below to install the battery. Step1: Pull the battery holder out from the remote control in the direction of the arrow. Step 2: Load a new battery properly with the (+) side up. Step3: Insert the battery holder back into the remote control. Battery Property Battery Type: CR2025 3V Battery Life: Approximately 1 year under normal use (at room temperature). Caution 1. 2. 3. 4. 4.
System Connections z z Always ensure that the DVD player, TV and any other electrical equipment to be connected with are switched off and unplugged from the power supply. Ensure that you observe the color coding when connecting audio and video cables. Connecting to TV Audio/Video connections Follow the drawings below to connect the DVD player to a TV's Audio/Video inputs with Audio/Video cables. Connecting to Amplifier Refer to your Audio equipment's manual before connection.
System Connections Connecting to External AV Source The player supports an AV signal input function. Use the audio/video cable to connect the unit to an external AV signal source such as a DVD, VCR etc. After connecting, switch the DVD/AV IN to AV IN. Connecting to Headphone Connect headphones to the headphone jack on the right side of the unit. When headphone is connected, the speakers will automatically turn off.
Power Supply Preparation Using the AC Adapter The player is supplied with an AC adapter for powering the unit and charging the battery. 1. Connect AC adapter to the right side of the DVD player in the jack marked DC 9.5V IN, as shown on the right. 2. Plug the two-prong end of the power cord into a grounded electrical outlet. The power indicator lights red. Note: Turn player's power off before unplugging.
Rechargeable Battery About Rechargeable Battery Pack Your portable DVD player comes with a lithium ion rechargeable battery that attaches to the rear of the DVD player. Charge the battery fully before initial use. Charging time is normally about 5 hours. A fully charged battery delivers about 3 hours of use, but playing time varies from disc to disc. If the battery will not be used for a long period of time, fully charge the battery prior to storage.
Rechargeable Battery Attaching the Battery Pack Refer to the following steps for attaching the Battery Pack: 1. Make sure the player is off and the AC or car adapter is disconnected. 2. Place the DVD player on a soft and smooth surface with the bottom of the unit facing up. 3. With one hand on the DVD player to prevent it from moving, take the battery and align the plastic tabs on the battery pack with holes on the player, and push the battery pack into the DVD player. 4.
Rechargeable Battery Detaching the Battery Pack If the DVD Player is not going to be used for long periods of time, the battery pack should first be fully charged and then detached. When the DVD Player is turned OFF, the DVD Player is still consuming some power in STANDBY mode. This will eventually discharge the battery. Make sure the power is turned OFF and the AC or car adapter is disconnected before detaching the Battery Pack. To detach the Battery Pack: 1.
Notes on Discs Compatible Disc Formats DISC LOGO DIAMETER 12cm DVD 8cm PLAYBACK TIME/ PLAYABLE SIDES 133 min (SS-SL) 242 min (SS-DL) 266 min (DS-SL) 484 min (DS-DL) 41 min (SS-SL) 75 min (SS-DL) 82 min (DS-SL) 150 min (DS-DL) 12cm 74 min 8cm 20 min CD 12cm JPEG Operation methods of some DVD discs are specified by the software manufacturer. Please follow the instructions for the disc. Care of Discs Handling Discs When loading or removing discs, do not touch their playing surfaces.
Playback Operation READ THE FOLLOWING INSTRUCTIONS CAREFULLY BEFORE USING YOUR DVD PLAYER FOR THE FIRST TIME. WARNING: Do not play poor-quality discs to avoid damaging the lens. Pre-operation 1. 2. 3. 4. 5. 6. Connect the unit to power supply through the provided AC adapter. Switch “POWER ON/OFF” to “ON” on the left panel to turn on the DVD player. The main unit power indicator lights green and screen displays the logo.
Playback Operation DVD Playback Play Pause Stop Zoom button A-B Button Press ENTER button to start playing, or (Direction buttons) or 0-9 buttons to select a Title and Chapter directly. Press ENT button to start playing. Press PAUSE button to pause during playback, then press PLAY button to resume normal playback. Press button to pause during play, then press it again to resume normal play.
Playback Operation DVD Playback (continued) TITLE button MENU button & buttons & buttons SLOW button Press TITLE button during play. The title menu will appear on the screen. Press (direction buttons) to select the title or disc menu item you wish to play, then press ENTER button to confirm your selection. Or press 0-9 buttons to select the item you prefer directly. Press MENU button during play. The root menu will appear on the screen.
Playback Operation DVD Playback (continued) INFO button AUDIO button SUBT button Press INFO button for detailed information about the disc during disc playback. Press it repeatedly to display as follows: Title Remain Chapter Elapsed Title Elapsed Chapter Remain Display Off DVD discs can contain up to 8 audio bit streams. For example: English, Spanish, French etc. To select the audio bit stream you prefer, press AUDIO button during playback.
Playback Operation DVD Playback (continued) Press ANGLE button to play the disc in multi-angle mode. Multi-angle means that a scene is shot from different angles so that the audience can watch from any angle, like the drawings below: ANGLE button If there are multiple angles in a scene, you can use the ANGLE button to select the angle you like to view. Press the ANGLE button repeatedly to view from different angle. NOTE: This function is only available for the DVD discs coded with multi-angle material.
Playback Operation CD Playback When a CD disc is loaded, the player will play it automatically by the default sequence of the disc. You can use , or number buttons to select a certain track to play. Pause STOP/ button & buttons During playback, press PAUSE button to pause the playback, then press PLAY button to resume playback. During playback, press button once to pause the playback, then press it again to resume playback. During playback, press the STOP button once to stop playback.
Playback Operation CD Playback (continued) & buttons GOTO button Press button to play the previous chapter. Press button to play the next chapter. Press GOTO button to select desired disc starting time, track starting time or track. During CD playback, press it repeatedly to display as follows: Disc Go To:--:-- Track Go To:--:-- Select Track:--/N N refers to the total track number of the disc. Use 0-9 buttons on the remote control to select directly.
Playback Operation Picture CD Playback Pre-operation 1. Load a Picture CD in the disc tray. The player will search for the disc automatically. 2.The screen displays the root folder with several subdirectories/subfolders. Use , buttons to select a desired folder. Then press , ENTER, PLAY or button on the remote control or front panel to confirm your selection. 3.The screen enters the selected subfolder to view the files. Use , buttons to select the desired file.
Playback Operation Picture CD Playback (continued) REP button MENU button GOTO button Press REP button to repeat a file, folder in sequence. Press it repeatedly, the display will be as follows: Random Single Repeat One Shuffle Repeat All Repeat Off Shuffle plays files of current folder randomly without obeying the original order. Random plays files of current folder randomly without obeying the original order. After playing the whole folder, play will be stopped automatically.
Playback Operation Picture CD Playback (continued) Picture Rotate While viewing a picture, use direction buttons , , , to rotate the picture.
System Setup You can change the default settings of this unit to customize its performance to your own preferences. Note: Set the system up while play is stopped or there is no disk in the player. To set up your system: 1. Press the SETUP button on the front panel. 2. The setup menu will appear on the screen. It includes General Setup Page, Speaker setup page, Dolby digital setup, Video setup page and Preference page. You can exit the setup menu by pressing the SETUP button again at any time. 3.
System Setup General Setup Page (continued) 2.Angle Mark This item is used to turn the Angle Mark on or off. Press the or button to highlight this item. Press the ENT or to enter the item. Press the or button to choose angle mark on or off. Press the ENT button to confirm your selection. Press the direction to exit this item. 3.OSD Language This item is used to set the OSD (on-screen display) language. Press the or button to highlight this item.
System Setup General Setup Page (continued) 6. Last Memory This item is used to set last memory state. Note: The last memory refers to resume playback from the point that you stopped last time. Press the or button to highlight this item. Press the ENT or to enter the item. The default setting of this item is off. Press the or button to choose on or off. Press the ENT button to confirm your selection. Press the direction button to exit this item.
System Setup Dolby Digital Setup (continued) 1. Dual Mono This item is used to set the channel output mode. Press the or button to highlight this item. Press the ENT or to enter the item. It includes stereo, L-Mono, R-Mono and Mix-Mono, Stereo by default. Press the or button to choose the proper one. Press the ENT button to confirm your selection. Press the direction button to exit this item. 2.
System Setup Video Setup Page (continued) 2. Brightness This item is used to adjust brightness level of the Screen. Press the or button to highlight this item. Press the ENT or to enter the item. Press the or button to adjust to desired level. The default level is 00. Press the ENT button to confirm your selection. 3. Contrast This item is used to adjust contrast level of the Screen. Press the or button to highlight this item. Press the ENT or to enter the item.
System Setup Preference page (continued) 2. Subtitle This item is used to set the subtitle language. Press the or button to highlight this item. Press the ENT or button to enter the item. The available languages are English, French, Spanish, Chinese, Japanese, Korean, Russian and Thai, English by default. Press the or button to choose the preferred Language. Press the ENT button to confirm your selection. Press the direction button to exit this item. 3.
Definitions Dolby Digital Dolby Digital is a technology developed by Dolby Laboratories. Audio tracks encoded in Dolby Digital can reproduce from one to 5.1 discrete channels of excellent quality audio. Letterbox screen This refers to a screen on which the playback picture of wide-screen DVDs appears with black bands running along the top and bottom. Pan & Scan screen This refers to a screen on which the playback picture of wide-screen DVDs is cut off at the left and right sides.
Troubleshooting If you suspect there is something wrong with the DVD player, immediately turn the power off. Disconnect the power connector and check that there is no smoke or excessive heat coming from the unit. Never open or try to repair the unit yourself. There are no user serviceable parts inside. PROBLEM The player cannot play. There is no sound. POSSIBLE CAUSE POSSIBLE SOLUTION The disc cover may not be closed. Close the disc cover. There may not be a disc in the DVD drive.
Troubleshooting PROBLEM There is no picture. Poor AV performance. POSSIBLE CAUSE POSSIBLE SOLUTION The LCD may be off or not be in correct video mode. Turn on the LCD and choose the correct video mode. The system connection may be not correct. Connect correctly. The unit may not be in DVD mode. Switch the DVD/AV IN switch to DVD. The disc may be dirty or warped. Clean or change the disc.
Specifications TFT screen size 8 inches Laser Wavelength 780/650 nm Video System NTSC Frequency Response 20Hz~20kHz Audio Signal-to-noise Rate ≥85dB Audio distortion+noise ≤-70dB (1kHz) Channel Separation ≥70dB (1kHz) Dynamic Range ≥80dB (1kHz) ±2.5dB 0.2 Audio Out Analog Audio Out Out Level: 1.5V±1.0 , Load: 10KΩ Video Out Video Out Out Level: 1VP-P±0.1, Load: 75Ω Unbalanced Negative Power AC 100-240V ~ Power Consumption 50/60Hz < 25W Dimensions 195mmX149mmX38.
For service, support and warranty information, visit www.polaroidelectronics.com or in the US call 1-866-289-5168, in Canada call 1-866-301-7922 and in Mexico call 01-800-400-2443. “Polaroid” is a registered trademark of Polaroid Corporation of Waltham, MA USA and licensed for use on the PDM-0817 to Petters Consumer Brands, LLC.
Portable DVD Player Docking Station ADS-1000 Operation Manual 20050324
Table of Contents Important Safety Instruction-------------------------------------------- 3 FCC Notice------------------------------------------------------------------- 5 Characteristic Features -------------------------------------------------- 6 Front View ------------------------------------------------------------------- 7 Rear Panel & Side Panel---------------------------------------------------- 8 Display Panel----------------------------------------------------------------- 9 Remote Control -------
Important Safety Instructions CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USE-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric to persons.
Important Safety Instructions Note: 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Do not use near water. Clean only with dry cloth. Do not block any ventilation openings. Maintain well ventilated conditions around the product. Do not put product on bed, sofa or anything that blocks ventilation. Install in accordance with the manufacturer’s instructions.
FCC Notice Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency nergy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Characteristic Features The Docking Station is designed for connecting to a compatible portable DVD player. It features an electrical connection interface that enables the portable DVD to effectively serve as a desktop DVD. It is integrated with connectors for peripheral devices to eliminate complicated connections and save valuable space around the unit. With the Docking Station, you can enjoy the expansion possibilities of desktop DVD with the portability of a portable DVD.
Front View Front Panel Drawing 1. Display panel Displays the time and status. 2. Remote Sensor Receives remote control signal for operation. 3. Power Indicator 4. SOURCE button Press to shift among DVD, TV, AV1 and AV2 mode. 5. Menu: Press to adjust the Picture standard, including Brightness, Contrast, Color, Language, or Reset all items. 6. ▲/▼ direction button Press to select items in the setup menu. Press to select channels in TV mode.
Rear Panel & Side Panel Rear Panel Drawing 1. ANT INPUT jack Connected to external antenna to receive the TV program in TV mode. 2. AUDIO OUT jack Output the audio signal to external equipment, such as amplifiers, etc. 3. VIDEO OUT jack Output the video signal to external equipment such as monitors, etc. 4. AUDIO IN jack Connected to external audio signal source. 5. VIDEO input jack Connected to external video signal source. 6. DC 9.5V input jack Connected to the AC adapter. 7.
Display Panel Display Panel Drawing 1. AM time indicator 2. PM time indicator 3. Hour or character indicators 4. Minute or character indicators 5.
Remote Control Preparation Using Of Remote Control Refer to the drawing and remove the Point the remote control towards the main unit when operating. The remote control works best at a distance less empty battery receptacle. than 7m and at an angle of up to 60°to the front of the unit. No obstacles may stand in the way between remote control and infrared sensor. Insert the battery into the receptacle. Make sure the polarity matches the marks inside the component.
Remote Control Remote Control Drawing - 11 -
Remote Control 1. POWER button Press to access to or exit the STANDBY mode. 2. TV button Press to enter TV mode. 3. DVD button Press to enter DVD mode. 4. AV1 button Press to shift to external AV1 input mode. 5. AV2 button Press to shift to external AV2 input mode. 6. Press to select menu items or settings. Press buttons to adjust volume. Or press to adjust value in the picture setup menu. Press buttons to select channels forward and backward in TV mode.
Attaching & Detaching Portable DVD player Note: Do not connect the power cord until all other connections have been made. Attaching Portable DVD player to Docking Station Follow the steps below to attach the portable DVD player to the Docking Station. It is advised to attach the rechargeable battery to the portable DVD player before this connection. Step1: Center the player on the Docking Station and line up the 4 slots on the bottom of the player with the 4 fixing hooks on the Docking Station.
System Connections • • Do not connect the power cord until all other connections have been made. Ensure that you observe the color cord when connecting audio and video cables.
System Connections Connecting To TV Signal Input Source The unit can be connected to a TV antenna to receive TV programs. Connections should be made as follows: After connecting the antenna, turn on the power of the Docking Station; press the SOURCE button on the front panel or the TV button on the remote control to switch to TV mode.
System Connections Connecting To the Power Adapter This unit is powered via the switching power adapter (supplied) : 1. Connect the AC adapter to jack marked with “DC 9.5V IN” on the rear panel of the unit. 2. 3. Plug the two-prong end of the power cord to the grounded electrical socket. When not using the unit, turn off the power of the unit first, and then unplug the power supply to prevent malfunctions.
TV Function Basic Operation Connect the antenna to the antenna jack on the rear panel. After connecting the antenna, connect the power supply cord. If the player is in standby mode, press the POWER button on the front panel to turn on the power. Press the TV button on the remote control to shift to TV mode. Press the buttons on the remote control to select the desired channel, or press the number buttons to select your desired channel.
TV Function Use the ▼、▲ buttons to select the item you want to set. Use the ►, ◄ buttons to select the item and enter it. Press the ► button on the remote control to exit the setup menu. Press the ◄ button on the remote control to return to the picture setup menu. Signal Use the ► direction button to select CATV TV signal input mode. Use the ◄ direction button to select ANT TV signal input mode. Channel Use the ►, ◄ buttons to change the channel.
TV Function Auto Memory Use the ▼、▲ buttons to select Auto Memory, press the ENT button to enter auto memory mode: SEARCHING CH:009 EXIT:◄ The auto memory will take a few minutes. The unit will search channels from the lowest channel to the highest channel in the standard channel list. When tuning operations are complete the unit will exit and store the channels by sequence in the memory. During tuning, press the ◄ button to exit the auto memory.
TV Function Power on To set the playback start time of the signal source, use number buttons to input the desired start time in sequence of hour, minute. Press the ►, ◄ direction buttons to shift between am and pm. Power off To set the playback end time of the signal source, use number buttons to input the desired time in sequence of hour, minute. Press the ►, ◄ direction buttons to shift between am and pm. When the playback of the signal source is over, the player will enter standby mode.
AV Function AV Function The docking station has an additional AV input and output. When an AV source is connected, press the AV1 or AV2 button on the remote control to enter external AV mode. Picture Parameter Setup Press the MENU button once on remote control to enter PICTURE setup menu, and screen will display as shown: PICTURE BRIGHTNESS CONTRAST COLOR LANGUAGE RESET ◄ Exit 10 10 10 ENGLISH Use the ▼、▲ buttons to select the item you want to set (Brightness, Contrast, Color).
Troubleshooting SYMPTOM CHECK ITEM z The attached portable DVD player does not work. z z z z There is no TV function. z z There is no picture or picture is unsteady. z z z The remote control does not work. z z z Make sure the Docking Station power is on. Make sure the portable DVD player is properly connected with the Docking Station. If not, attach the DVD player again. (See page13). Make sure the SOURCE mode has been switched to the DVD mode.
Specifications This unit is compatible with all PDM series players with Docking Jack. Power AC100V~ 240V, 50/60Hz TV Type NTSC Power Consumption ≤30W Dimension 230mm X 208mm x 46mm (W/H/D) Weight About 0.75 kg DESIGN AND SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE For service, support and warranty information, visit www.polaroidelectronics.com or in the US call 1-866-289-5168, in Canada call 1-866-301-7922 and in Mexico call 01-800400-2443.