7” Portable DVD Player PDV-0750 Operation Manual 20040928
Contents Important Safety Instruction -------------------------------------------------------------------- 3 Precautions with Moisture -------------------------------------------------------------------- 4 Function Features ------------------------------------------------------------------------------ 5 Parts Introduction --------------------------------------------------------------------------------- 6-7 Remote Control -------------------------------------------------------------------------------
Important Safety Instruction WARNING: To reduce the risk of fire or electric shock, DO NOT expose this product to rain or moisture. The lighting flash with arrowhead symbol,within an triangle, alerts the user to “dangerous voltage” which could cause electric shock. The exclamation point within a triangle indicates to the user to read important operating and maintenance instructions in the manual. IMPORTANT FOR LASER PRODUCTS 1. CLASS 1 LASER PRODUCT NOTES 2.
Precautions with Moisture Under the following circumferences, moisture may appear on the lens of the product, which is the most sensitive part of the DVD player. - The DVD player is suddenly moved from a cold place to a warm place. - A room is heated while the DVD player starts operating, or the DVD is placed near an air-conditioner. - In the hot summer season, the DVD player is moved from an air-conditioned room to a hot, damp place to be used. - The DVD player is being operated in a damp place.
Function Features 1. EXCELLENT SOUND Dolby digital delivers great sound. 2. HIGH RESOLUTION MPEG2 decoding format achieves more than 500 lines of horizontal resolution. 3. SPECIAL FUNCTIONS Supports multi-angle, excessive language caption. 4. COMPATIBILITY Plays DVD, CD, CD-R, CD-RW and MP3 discs. 5. PARTICULAR PERFORMANCE Multi-speed, fast forward, fast backward, slow play and repeat playback. 6. SEARCH BY TIME Search for a certain time on a disc. 7. LAST MEMORY PLAYBACK 8.
Parts Introduction DVD Player 1. Power switch 14. Bright up/down 2. Disc cover 15. Speaker 3. Open -For enjoying high quality stereo music. 4. Remote sensor 16. Mode button 5. Direction buttons -The player is with TFT display mode: normal 6. Prev skip button screen (4：3) or wide screen (16：9). -Press to skip to previous chapter/track. 17. TFT Liquid Crystal Display 7. 18. Color up/down Next skip button -Press to skip to next chapter/track. 19. Rotate button 8.
Parts Introduction Right Side Of The Panel 1. Earphone volume adjusting knob -Used to adjust the earphone and speaker volume. 2. Earphone jack -HI-FI earphone output, when connecting this jack, speaker volume is turned off. 3. Audio output/input 4. Video output/input jack 5. jack Switch position between AV ‘IN’ and AV ‘OUT’ -Switch to IN, then the player is in audio and video input mode. -Switch to OUT, then the player is in normal playback mode. 6.
Remote Control 1. PWR button -Press to enter standby mode. 2. INFO button -Press for detailed information on the disc playing. -Keep pressing to remove information from screen. 3. TITLE button -Press to display titles if present on the disc. 4. Direction buttons -Press to select menu items. 5. 6. 7. 8. ENTER button -Press to confirm the items or setting. SETUP button -Press to access the DVD player’s setup menu. 0-9 number buttons -Select numbers by pressing these buttons.
Remote Control 9. NEXT SKIP button 17. -Press to go to next chapter. 10. SUBT button press PLAY button to resume normal -When a DVD is playing, press to select playback. a subtitle language or to turn subtitles -Press the button twice repeatedly to off (if the DVD disc contains multiple subtitles). 11. stop playback completely. 18. ANGLE button -Press to access various camera angles 19. 13. time, track or title. 20. -Select numbers greater than 9 by between A and B.
Connections Connecting to a TV Audio/video connections 1. Always ensure that the DVD player, TV and any other electrical equipment you are connecting the DVD player to is switched off and unplugged from the power supply. 2. The easiest way to connect the DVD player to a television is via the supplied Audio/Video connections. Connect the audio/video cable from the DVD player to the TV’s audio/video inputs.
Playback Preparations Usage of Remote Control 1. Refer to the drawing, take the back cover off of the remote control and remove the empty battery receptacle. 2. Prior to shipping, a separating film was applied to the battery. Remove this film. 3. Insert the battery into the receptacle and insert the receptacle into the remote. 4. For best results, aim the remote directly at the player’s receiving window within the range of 15 feet, and angles of 60 degrees. 5.
Playback Preparations Disc Formats Supported by this Player The unit can play discs bearing any of the following logos: DISC LOGO DIAMETER PLAYBACK TIME/ PLAYABLE SIDES 133 min（SS-SL） 12cm 242 min（SS-DL） 266 min（DS-SL） 484 min（DS-DL） DVD 41 min ( SS-SL ) 8cm 75 min ( SS-DL ) 82 min (DS-SL) 150 min (DS-DL) 12cm 74 min 8cm 20 min 12cm 600 min CD MP3 • The operating method of some DVD discs is specified by the software maker. Please refer to the instruction manual of the disc.
Playback Preparations Usage of Power Switching Adapter The player is supplied with a power switching adapter. 1. Connect AC adaptor to the power jack marked “DC 12V IN” on the side of the DVD player. 2. Connect the rabbit joint end of the AC adaptor to the power cord. 3. Plug the two-prong end of the power cord to a grounded electrical socket. Note: Please turn player’s power off first and then unplug the power to prevent malfunction. Pre-operation 1. Connect to power. 2.
Power Supply Using and Charging the Battery Pack Charge the Battery Pack before using it the first time. Charging time is normally between 4 hours. Normally, the Battery Pack can be charged approximately 300 times. When fully charged, the Battery Pack delivers 2.5 hours of continuous power. Battery Pack should be fully charged before initial use! 1. Attaching the Battery Pack Turn the player upside down on a smooth, clean surface.
Detaching Battery Pack Detaching Battery Pack from the unit: If the player is not going to be used for a long period of time, we recommend that you detach the Battery Pack. Even if the unit is powered down, the unit is still consuming some power in STANDBY mode. This could lead to over discharging the battery. Make sure the power is turned off before detaching the Battery Pack. After detaching the battery pack, take care when handling the unit. 1. Slide and hold in position.
Basic Operation Please read these instructions carefully before using your DVD player for the first time. 1. Turn on the player’s power by switching the POWER switch on the side of the player to “ON”. 2. Press OPEN button on front panel to open the disc cover. 3. Load disc with the label facing up to prevent damage to the player or disc. 4. Close the disc cover. The player will automatically search for the disc and when it finds it, play will begin.
Basic Operation Stop During playback, press the STOP button once on the remote control to stop playing. Press the PLAY button, then the player will play from the point where it stopped. Mode During playback, press the MODE button on the control panel to change the aspect ratio on the screen. Title Menu 1. Press the TITLE button on the remote control during payback. The title menu will appear on the TFT screen. 2.
System Setup GENERAL SET-UP You can change the default settings to customize performance to your own preference. 1. Remove the disc from the DVD drive and press the ‘SETUP’ button on the remote control, the settings menu will appear. It includes General Setup, Speaker Setup, Dolby Digital Setup, Video Setup and Preference setup. 2. Press (direction buttons) on the remote control to select a category. 3. All the items in the category will appear on the TV screen.
System Setup 4. SPDIF Output This item is used to set the format of digital audio. ‘SPDIF OFF’ turns off the digital audio; ‘SPDIF/RAW’ outputs the original. For example, if the disc being played is Dolby Digital, then the digital audio output is also Dolby Digital. Select ‘SPDIF/PCM’ when you connect with a 2 channel digital stereo amplifier. 5. Captions You can choose captions on or off on screen during playback. 6.
System Setup Preference Page 1. Audio, Subtitle, Disc Menu There are several audio, subtitle and menu languages in some DVD discs. If there is no specific preset in the disc, then the set audio, subtitle and menu language will have the priority to be played first. 2. Default Reset Use this function to reset all the settings. IMPORTANT NOTE: If connected with TV, please select relevant TV system depending on your TV type. This menu function is not available while a disc is playing.
Playback Functions Fast Forward & Rewind Press the and buttons to active fast forward or rewind. Slow Forward & Rewind Press the SLOW button to slow forward or rewind. Repeat 1. Repeat a title, chapter or track. Press the REPEAT button on the remote control. Continually pressing the REPEAT button will display a menu as follows: Chapter, Title and All. 2. You can temporarily mark your own section of a DVD that you would like to play repeatedly.
Playback Functions Search by time You can use the GOTO button to search by time, namely to play from a specific time. During DVD playback, press the GOTO button once and TV screen will display the title or chapter, then you can use number buttons to select any one of them. Press the GOTO button the second time, then you can use number buttons to input the time you desired (hour, minute, second) and the player will play from the inputted time. Resume Playback 1.
Playback Functions Playing a JPEG JPEG is a common picture format that has few bytes and low loss rate of picture. Hundreds of pictures can be stored in a disc in this format. In order to realize real digital album, use film to make ”PICTURE CD”, namely JPEG format. OPERATION 1. Normal Playback Load a JPEG disc in. After reading the disc, OSD will display the menu. Use the direction buttons and ENTER button to choose items. Many discs have other items besides pictures. y 2.
Care of Discs How to hold discs Cleaning Care When loading or removing discs, try not Use a soft, dry cloth for cleaning. For to touch their playing surfaces. stubborn dirt, soak the cloth in a detergent solution; ring well first and wipe. Use a dry cloth to wipe it dry. Do not use any volatile agents such as benzine or paint thinner, as they may damage the surface of the player. Cleaning Fingerprints or other dirt on the disc may Lens cleaner affect sound and picture quality.
About Rechargeable Battery Your portable DVD player comes with a lithium ion rechargeable battery that attaches to the bottom of the player. 1. Under normal working conditions, the battery can be charged and discharged over 300 times. 2. The properties of the rechargeable battery are: 7.4 Volts, with a capacity of 4200mAh, interior lithiumionic electric circuit protection for recharge and discharge. 3. If the battery is not used it will automatically discharge gradually within one month. 4.
Special Notes On Revolving TFT LCD Screen The revolving TFT LCD screen is one of the outstanding features about this product. You are suggested to take the following steps for proper operation. 1. Open the screen cover to position (A) as shown in left figure at which the screen is vertical to the operation panel. Pos A 2. Revolving the screen horizontally about its axis in the clockwise only. The maximum revolving degree is 180 (position C) at which you will hear a click and the screen faces backward.
Troubleshooting Symptom What To Check The player cannot play. • Make sure the AV IN/OUT switch on the side of the player unit is in the OUT position for standard play. • Make sure the disc cover is closed. • Make sure a disc is loaded. • Make sure the disc isn’t loaded upside down. • Disc should be clean, not dirty or warped. • Player’s region code should be the same as region code of DVD disc.
Specifications TFT screen size 7 inches Laser Wavelength Wavelength: 780/650nm Video System PAL/NTSC/MULTI Frequency Response 20Hz～20KHz ±2.5dB Audio Signal-to-noise Rate ≥ 85 dB Audio distortion + noise ≤ -70dB （1KHz） Channel Separation ≥ 70dB （1KHz） Dynamic Range ≥ 80dB （1KHz） Video Out 0.2 Analog Audio Out Out Level: 2V±1.0 , Load: 10KΩ Digital Audio Out Out Level: 0.5VP-P, Load: 75Ω Audio Out Video Out Out Level: 1VP-P±0.
For service, support and warranty information, visit www.polaroidelectronics.com or in the US call 1-866-289-5168, in Canada call 1-866-301-7922 and in Mexico call 01-800-400-2443. “Polaroid” is a registered trademark of Polaroid Corporation of Waltham, MA USA and licensed for use on the PDV-0750 to Petters Consumer Brands, LLC.
