Operation Manual

18
Polaroid Q40
There are two built-in zoom functions: optical zoom and
digital zoom. When taking photos, you can zoom in or
out on an object using the zoom wheel.
Zoom indicator
(See “Digital
Zoom“ on page
46)
When the optical zoom reaches its maximum value, it
stops momentarily. Release and push the zoom wheel
again, and the optical zoom will switch over to digital
zoom automatically. After the adjustment, the zoom
indication scale hides immediately, and the current
zoom status is indicated by the following symbol
.
Shooting in Auto Mode
AUTO
Auto mode is the easiest mode to take photos. While
operating in this mode, the camera automatically
optimizes your photos for best results.
To start shooting, do the following:
1. Press
the Power button to turn the camera on.
2. In the Mode menu, select the Auto mode (
AUTO
).
3. Compose your picture in the LCD screen and press
the Shutter button halfway to focus on the subject.
4. The focus frame in the middle of the LCD will turn to
green when the subject is properly in focus.
5. Press the Shutter button fully to capture the image.
Using the Zoom Function
BASIC OPERATION