Operation Manual

60
Polaroid Q40
LCD Brightness
Use this setting to adjust the brightness of your LCD
screen.
1. Select the
LCD Brightness setting from the Setup
menu as described previously.
2. Select auto or adjust the brightness level using
the Left/Right button, and press the
button to
confirm the setting.
Beep
Use this setting to adjust beep volume, shutter button,
self timer, power on, and power off tones.
To change these settings:
1. Select the
Beep setting from the Setup menu as
described previously.
2. Use the
Up/Down navigation buttons to switch
between volume, shutter tone, key tone, self-timer
tone, and power tone options.
3. Press the or Right button to enter, and Press
the Up/Down button to adjust volume and change
various sounds, then Press the
button to confirm
the setting.