40” HD Widescreen LCD Television TLA-04011C and 4011-TLXB
©2007 by . All rights reserved. “Polaroid” and “Polaroid and Pixel” are trademarks of Polaroid Corporation, Waltham, MA, USA. Changes are periodically made to this document. Changes, technical inaccuracies, and typographic errors will be corrected in subsequent editions. For service, support and warranty information, visit www.polaroid.com. This product contains electrical or electronic materials.
FCC Federal Communications Commission Statement 1. Reorient/Relocate the receiving antenna. 2. Increase the separation between the equipment and receiver. 3. Connect the equipment into an outlet on a circuit which is different from what the receiver is connected to. 4. Consult the dealer or an experienced radio/TV technician for help. Changes or modifications not expressly approved by the manufacturer responsible for compliance could void the user authority to operate the equipment.
Warnings and Precautions Warnings and Precautions To prevent any injuries, the following safety precautions should be observed in the installation, use, servicing and maintenance of this equipment. Before operating this equipment, please read this manual completely, and keep it nearby for future reference. This symbol is intended to alert the user to avoid the risk of electric shock. This equipment must not be disassembled by anyone except qualified service personnel.
Warnings and Precautions ▪ Use and handle the power cord with care. Do not place any heavy objects on the AC power cord. ▪ Do not touch the power cord and antenna cable during lightning. ▪ Remove the plug from the wall outlet, if the equipment will not be used for a long period of time. ▪ Do not place, use or handle this equipment near water. ▪ Never expose the equipment to liquid, rain, or moisture. Seek for service if any of the above is spilled into the equipment.
Warnings and Precautions Outdoor Antenna Safety Instructions If an outdoor antenna is connected, follow the precautions below: ▪ An outdoor antenna should not be located in any area where it could come in contact with overhead power lines, or any other electric light or power circuits. ▪ When installing an outdoor antenna system, extreme caution should be taken to prevent contact with power lines. Direct contact with power lines may be fatal and should be avoided at all costs.
TABLE OF CONTENTS Warnings and Precautions Important Safety Instructions ....................................................................................... 2 Antenna Safety Instructions ......................................................................................... 4 Chapter 1 Introducing the LCD TV Key Features ............................................................................................................... 6 Package Contents ..................................................
Chapter 1 Introducing the LCD TV Chapter 1 Introducing the LCD TV Key Features Various Audio/Video terminals for external equipment connection ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ 2 sets of composite A/V input terminals 1 set of S-VIDEO terminals 2 sets of component Video input terminals 1 VGA/ Audio input terminals 2 HDMI/Audio input terminals 1 set of Audio(L/R) output terminals 2 SPDIF output terminals (Optical x 1 /Coaxial x 1) 1 Headphone terminal The built-in TV tuner to receive HD ATSC ▪ This function allows the recep
Chapter 1 Introducing the LCD TV Package Contents LCD TV Bottom Stand / Screw Driver and Screws Remote Control/ AAA Batteries x 2 VIDEO Cable Component Cable Power Cord AUDIO Cable Warranty Card User’s Manual Quick Start Guide Stand Assembly Guide Remote control Guide SET UP CAB/ SAT TV DVD AUX SLEEP DVD MENU VOL MUTE CH ASPECT PAGE LAST LIVE TV GUIDE PIP MENU OK INFO CC EXIT DVR 1 4 2 ABC 5 GHI JKL 7 8 3 DEF 6 MNO 9 PQRS TUV WXYZ INPUT 0 ENTER .
Chapter 1 Introducing the LCD TV Setting Up Your LCD TV How to install the TV Stand Read all instructions before continuing with the stand installation. Attach the Stand the TV with the bottom foam packaging material still attached. a. b. Lift foam packaging material from the top of the LCD out of the box. Lift LCD out of the box, with the bottom foam packaging material still attached, and place onto a stable surface. a b Protective bag Stand c. d.
Chapter 1 Introducing the LCD TV How to remove the TV Stand If you prefer to mount your new Polaroid TV on a wall instead of attaching it to the stand, please reference the instructions included in the wall mounting kit (sold separately). To prevent damaging the surface of the LCD TV, place the TV on a soft cloth. Soft cloth Remove the screws of the table stand and detach the table stand from the TV.
Chapter 1 Introducing the LCD TV How to setup the TV Use a supplied antenna cable to connect the VHF/UHF signal to the LCD TV’s ANT. terminal (refer to page15-17). Connect the AC power cord at the back of the TV and connect the power cord to wall outlet. Insert the 2 batteries supplied in remote control. Step1 Slide the back cover up to open the battery compartment of the remote control. Step2 Insert two AAA size batteries.
Chapter 1 Introducing the LCD TV Your LCD TV Front/Right Side View and Controls ENGLISH LED The LED light indicates when the LCD TV is activated. IR Infrared Receiver VOLUME+Adjusts the volume up and down. Selects the main-menu item and change values for items when in the OSD mode. VIDEO1 IN VIDEO Connects to the composite Video and Audio output jacks on external video equipment. L CHANNEL▲▼ Scans up and down through channels. Selects sub-menu item when in the OSD mode.
Chapter 1 Introducing the LCD TV Rear View and Jacks VIDEO2 IN Connects to the composite VIDEO and AUDIO(L/R) output jacks on external video equipment. HDMI1 IN/HDMI2 IN Connects all digital AV equipment with HDMI connector.HDMI supports enhanced, high-definition video and two-channel digital audio. The AUDIO(L/R) of HDMI IN is for DVI connection. S-VIDEO IN Connects to the S-VIDEO and AUDIO(L/R) output jacks on external video equipment.
Chapter 1 Introducing the LCD TV Your Remote Control Turns the LCD TV on and off 1 2 SET UP 3 TV 1 CAB/ SAT DVD AUX 2 SET UP Remote control universal code setup.
Chapter 1 Introducing the LCD TV 12 PIP PIP function is not available. Only for other devices function. 13 MENU Displays the OSD menu on the screen. 14 ◄ ►▲▼,OK Cycles through OSD options and selects SET UP CAB/ SAT TV DVD AUX SLEEP DVD MENU individual menu items. OK confirms option settings OK VOL MUTE CH ASPECT PAGE INFO 1 19 Displays information on the LCD TV screen such as input source, channel, program title.
Chapter 2 Installing the LCD TV Chapter 2 Installing the LCD TV Connecting a TV Cable or an Antenna Antenna Connection The antenna requirements for good color TV reception are more important than those for a black & white TV reception. For this reason, a good quality outdoor antenna is strongly recommended. The following is a brief explanation of the type of connection that is provided with the various antenna systems.
Chapter 2 Installing the LCD TV Use one of the following two diagrams when connecting an outdoor antenna. A: Shows how to use a VHF/UHF combination outdoor antenna. B: Shows how to use a separate VHF and/or UHF outdoor antenna. A. Combination VHF/UHF antenna VHF/UHF Antenna 300/75-ohm adapter (not included) VHF/UHF Antenna 300-ohm twinlead cable 75-ohm coaxial cable B.
Chapter 2 Installing the LCD TV Cable TV (CATV) Connection ■ A 75-ohm coaxial cable connector is built into the set for easy hookup. When connecting the 75-ohm coaxial cable to the set, connect the 75ohm cable into the ANT. terminal. ■ Some cable TV companies offer premium pay channels. Since the signals of these premium pay channels are scrambled, a cable TV converter/descrambler is generally provided to the subscriber by the cable TV company.
Chapter 2 Installing the LCD TV Use a supplied antenna cable to connect the TV signal to the LCD TV’s TV CABLE terminal. HDTV/TV Air/CABLE VHF/UHF IN Connect the AC power cord at the back of the TV and connect the power cord to wall outlet. HDTV/TV Air/CABLE VHF/UHF IN This TV is equipped with a safety fuse. In the event of an electrical storm or power outage the safety fuse is designed to protect your TV.
Chapter 2 Installing the LCD TV Press the button on the remote to turn on the LCD TV. (Scroll down using the UP/DOWN buttons to see Computer-VGA option) ENGLISH Main TV(CABLE/AIR) VIDEO1 (SIDE) VIDEO2 (REAR) VIDEO3 (S-VIDEO) VIDEO4 (YPbPr1) VIDEO5 (YPbPr2) VIDEO6 (HDMI1) VIDEO7 (HDMI2) COMPUTER(VGA) Press the INPUT button on the remote to display the Input List. Use the ▲▼ buttons to select TV (Cable/Air) and press the OK button.
Chapter 2 Installing the LCD TV Connecting a VCR Rear of TV HDMI 2 IN VGA IN HDMI 1 IN AUDIO OUT YPbPr1 IN AUDIO L Y AUDIO R L Pb Pr R STEREO AUDIO L Y Pb DIGITAL OPTICAL R HDTV/TV Air/CABLE L COAXIAL Pr VHF/UHF IN VIDEO L AUDIO VIDEO2 IN R L R S-VIDEO AUDIO S-VIDEO IN L YPbPr2 IN R R AUDIO AUDIO Cable S-VIDEO Cable AV Cable A B METHOD A: Use a composite cable to connect the VCR’s composite video/audio jacks to the LCD TV’s VIDEO2 IN jacks.
Chapter 2 Installing the LCD TV Connecting a Video Camera or Game console Rear of TV ENGLISH Right Side HDMI 2 IN VGA IN HDMI 1 IN AUDIO OUT VIDEO YPbPr1 IN AUDIO Y AUDIO Pb Pr STEREO AUDIO DIGITAL OPTICAL L L R L R L Y R Pb R HDTV/TV Air/CABLE L COAXIAL Pr VHF/UHF IN VIDEO1 IN VIDEO L AUDIO VIDEO2 IN R L R S-VIDEO AUDIO S-VIDEO IN L YPbPr2 IN R R AUDIO AUDIO Cable or S-VIDEO Cable GAME CONSOLE B AV Cable NOTE: The connections shown for the game console may not match
Chapter 2 Installing the LCD TV Connecting a DVD Player Rear of TV HDMI 2 IN VGA IN HDMI 1 IN AUDIO OUT YPbPr1 IN AUDIO AUDIO L R L R L Y Pb Pr R L Y Pb STEREO AUDIO DIGITAL OPTICAL R HDTV/TV Air/CABLE L COAXIAL Pr VHF/UHF IN VIDEO AUDIO VIDEO2 IN L R S-VIDEO AUDIO S-VIDEO IN L YPbPr2 IN R R AUDIO or Pb Pr COMPONENT/AUDIO Cable AUDIO Cable S-VIDEO Cable AV Cable A B C Pb Pr D V D PLA YER METHOD A: Use a composite cable to connect the DVD player’s composite video/audio
Chapter 2 Installing the LCD TV Connect all AC power sources, before turning on the power switch of the LCD TV or other connected equipment. button on the remote to turn on the LCD TV. To watch a DVD, press the INPUT button on the remote to select VIDEO2( METHOD A), or VIDEO3 ( METHOD B), or VIDEO4/VIDEO5 (METHOD C). For best picture quality, if your equipment has component video output, use a component cable instead of a composite video or S-video cable.
Chapter 2 Installing the LCD TV Connecting a Digital TV Cable Box or Digital Satellite Receiver Rear of TV HDMI 2 IN VGA IN HDMI 1 IN AUDIO OUT YPbPr1 IN AUDIO AUDIO L R L R L Y Pb Pr R L Y Pb STEREO AUDIO DIGITAL OPTICAL R HDTV/TV Air/CABLE L COAXIAL Pr VHF/UHF IN VIDEO AUDIO VIDEO2 IN L R S-VIDEO AUDIO S-VIDEO IN L YPbPr2 IN Pb R R AUDIO Pr COMPONENT/AUDIO Cable Pb Pr Use a component cable to connect the satellite receiver’s/TV Cable Box’s component (YPbPr1) output jac
Chapter 2 Installing the LCD TV Connecting an AV Equipment with HDMI Connector Rear of TV ENGLISH HDMI 2 IN VGA IN HDMI 1 IN AUDIO OUT YPbPr1 IN AUDIO L Y AUDIO R L Pb Pr R L Y Pb STEREO AUDIO DIGITAL OPTICAL R HDTV/TV Air/CABLE L COAXIAL Pr VHF/UHF IN VIDEO L AUDIO VIDEO2 IN R L R S-VIDEO AUDIO S-VIDEO IN L YPbPr2 IN R R AUDIO HDMI Cable AV EQUIPMENT Use a HDMI cable to connect the AV equipment’s HDMI output jack to the LCD TV’s HDMI IN jacks.
Chapter 2 Installing the LCD TV Connecting an AV Equipment with DVI Connector Rear of TV HDMI 2 IN VGA IN HDMI 1 IN AUDIO OUT YPbPr1 IN AUDIO L Y AUDIO R L Pb Pr R L Y Pb STEREO AUDIO DIGITAL OPTICAL R HDTV/TV Air/CABLE L COAXIAL Pr VHF/UHF IN VIDEO L AUDIO VIDEO2 IN R L R S-VIDEO AUDIO S-VIDEO IN L YPbPr2 IN R R AUDIO AUDIO Cable AUD IO L HDMI-to-DVI Cable R DVI IN AV EQUIPMENT Use a HDMI-to-DVI cable to connect the AV equipment’s DVI output jack to the LCD TV’s HDMI I
Chapter 3 Using the LCD TV Connecting a PC Rear of TV ENGLISH HDMI 2 IN VGA IN HDMI 1 IN AUDIO OUT YPbPr1 IN AUDIO L Y AUDIO R L Pb Pr R L Y Pb STEREO AUDIO DIGITAL OPTICAL R HDTV/TV Air/CABLE L COAXIAL Pr VHF/UHF IN VIDEO L AUDIO VIDEO2 IN R L R S-VIDEO AUDIO S-VIDEO IN L YPbPr2 IN R R AUDIO AUDIO Cable VGA Cable PC Use a D-SUB cable to connect the PC’s D-SUB output jack to the LCD TV’s VGA input jack. Use an audio cable to connect the PC’s audio output jacks to LCD TV’s.
Chapter 3 Using the LCD TV Connecting an Audio Receiver or a Dolby Digital 5.1 Sound System For better sound quality, you may want to use a Home Theater/Stereo System. NOTE: If you have a Home Theater/Stereo System that you would like to use with your new TV, we recommend that you do NOT use your TV’s audio output for this connection. For the best sound quality, our product testing has shown that you should connect your Home Theater/Stereo System directly to your A/V device. I.E.
Chapter 3 Using the LCD TV Chapter 3 USING THE FEATURES ENGLISH Wide Screen Viewing Wide Screen function allows viewing of 4:3/16:9 images in wide screen mode, cycling through the following wide screen settings. Press the ASPECT button repeatedly to select the screen format you want. FULL Stretches the image vertically and horizontally to keeps the image size consistent in the center of the screen and stretches the sides ZOOM Stretches the image vertically and horizontally to fill the screen at 1:2.
Chapter 3 Using the LCD TV Operating the Menu Press the button to turn the LCD TV on. Press the MENU button on the remote control,the on-screen menu will appear on the screen. Use the ◄► buttons to select your main menu option. VIDEO MENU: Allows you to make adjustments to your picture settings.
Chapter 3 Using the LCD TV TV MENU: Allows you to edit and label channels. TV ENGLISH Channel Scan Tuner Mode Channel Skip Time Zone Cable Eastern Time Select Exit SETUP MENU: Allows you to set up a variety of features: Language, Closed Caption,Factory Reset, Parental Control, and Sleep Timer.
Chapter 3 Using the LCD TV Customizing the VIDEO Settings Press the button to turn the LCD TV on. Press the MENU button on the remote control to display the Main menu, and use the ◄► buttons to select the VIDEO.
Chapter 3 Using the LCD TV Color temperature Color Temperature R Gain G Gain B Gain User 120 120 120 Color Temperature Select Exit Noise Reduction Select to reduce the noise level of connected equipment: Medium/ Strong/Off/Low. VGA Press the OK button to enter the VGA Setting: H.Position V. Position Clock Phase 72 31 127 31 VGA Select Exit ▪ H. Position Adjusts the position of the picture left and right in the window ▪ V.
Chapter 3 Using the LCD TV Customizing the AUDIO Settings Press the button to turn the LCD TV on. Press the MENU button on the remote control to display the Main menu, and use the ◄► buttons to select the AUDIO.
Chapter 3 Using the LCD TV SPDIF Type Allows to selection of the digital sound format: PCM/OFF/Dolby Digital ▪ Dolby Digital: The external audio system is connected to the AUDIO OUT DIGITAL (OPTICAL or COAXIAL) ot the LCD TV ▪ OFF: Select OFF to turn off the external audio system Audio Language Allows to select the audio language:English/Spanish/French. Speaker Allows to select to turn on or off the TV speakers.
Chapter 3 Using the LCD TV Customizing the TV Settings Press the button to turn the LCD TV on. Press the MENU button on the remote control to display the Main menu, and use the ◄► buttons to select the TV. Use the ▲▼buttons to highlight an individual TV option, use the ◄► buttons changes the setting, and press the MENU exits the menu.
Chapter 3 Using the LCD TV Press the ▼ button to select the desired channel, and press the OK button repeatedly to select show ( ) or hide( ) Time Zone Allows selection of regional TV systems of USA: Eastern Time/Indiana/Central time/Mountain Time/Arizona/ Pacific Time/Alaska/Hawaii Customizing the SETUP Settings Press the button to turn the LCD TV on. Press the MENU button on the remote control to display the Main menu, and use the ◄► buttons to select the SETUP.
Chapter 3 Using the LCD TV The SETUP menu includes the following options: OSD Language Selects to display all on-screen menus in your language of choice: English/French/Spanish Time Setup Allows to set the current time. ▪ ON :Selects to display the system current time. ▪ OFF :Selects to set the current time. Press the ▲▼ buttons to select the Date or Time. Press the ◄► buttons to move each setting, and use 0-9 keys to set the current time.
Chapter 3 Using the LCD TV Digital Closed Caption: Press the◄►buttons to select the digital closed caption options: Service1/Service2/Service3/Service4/Service5/Service6/OFF Caption Style: Press OK button to customize the settings for digital closed caption option: Custom Caption Style Font Size Font Color Font Opacity Background Color Background Opacity Window Color Window Opacity Large White Solid Black Solid Black Translucent Closed Caption Style Parental Select Exit The Parental Control can be
Chapter 3 Using the LCD TV Allows to block digital channels.
Chapter 3 Using the LCD TV Using the Program Block Settings Use the ▼ buttons to highlight Parental, and press the OK button. OSD Language Closed Caption Parental Gamma Reset Default Setup English Middle Select Exit Use the Parental function, must enter a four-digit password. The factory password is 0000.
Chapter 3 Using the LCD TV The Parental block menu includes the following options: U.S. TV Ratings Selects to activate the TV Rating programs. U.S. Movie Ratings Selects to activate the MPAA Rating programs Canadian English Ratings Selects to activate the English Rating programs of Canada. Canadian French Ratings Selects to activate the French Rating programs of Canada Block MPAA Unrated ▪ YES: Block all movies that are broadcast without a MPAA rating.
Chapter 3 Using the LCD TV U.S. TV Ratings The U.S.TV Rating has 2 rating methods: Content-Based Rating and Age-Based Rating. The U.S.TV Rating includes the following options: ENGLISH A D L S V FV TV-Y TV-Y7 TV-G TV-PG TV-14 TV-MA Allowed Rating U.S.
Chapter 3 Using the LCD TV Canadian English Ratings The Canadian Englsh Ratings includes the following options: C C8+ G PG 14+ 18+ Allowed Rating Canadian English Ratings Blocked Rating Set OK Select Exit RATING DESCRIPTION C All children C8+ Children 8 years and older G General programming PG Parental guidance 14+ Viewers 14 and older 18- Adult programming Use the ◄►▲▼ buttons to select the rating you want and press the OK button repeatedly to select BLOCK or UNBLOCK .
Specifications U.S. Movie Ratings G PG PG-13 R NC-17 X Allowed Rating Blocked Rating Canadian English Ratings Select Exit RATING DESCRIPTION G General Audiences. Movie is appropriate for all ages PG Parental Guidance Suggested. May contain material not suited for younger viewers PG-13 Contains content that may not be appropriate for viewers under the age of 13 R Restricted.
Chapter 3 Using the LCD TV Using the Program Guide The Program Guide feature brings all sorts of information to your screen, such as program title, program duration, time remaining, rating information, closed caption, availability, etc. With the LCD TV connected to a television programming source, press the INPUT button on the remote control and use the ▲▼ buttons to select TV and press the OK button.
Specifications SPECIFICATIONS Panel Size 40” TFT LCD Brightness 500 cm2 Contrast Ratio Max. Resolution Input Connector 1200:1 1366x768 VIDEO/AUDIO(L/R) 2 S-VIDEO/AUDIO(L/R) 1 YPbPr/AUDIO(L/R) 2 VGA/AUDIO(L/R) 1 HDMI/AUDIO(L/R) 2 AUDIO OUT(L/R) 1 OPTICAL/COAXIAL 1 HEADPHONE 1 Power Source AC100~240V, 50/60HZ, 3.0A Power Consumption 300 W, standby < 5 W Dimension 38.9 w x 29.3 h x 9.
Programming Your Remote Control PROGRAMMING YOUR REMOTE CONTROL Your remote lets you control four devices with one easy-to-use, compact unit. After installing batteries, you can program the remote to control your Universal TV, VCR or DVD, Cable or Satellite Receivers, Amplifi er or Tuner, and Auxiliary devices. To do so, follow the instructions in “Programming a Device”. For best results, please read and follow all the remaining instructions. Keep this guide for future reference.
Programming Your Remote Control Searching for your Code If your device does not respond to the remote after trying all codes listed for your brand, or if your brand is not listed, try searching for your code: Press and hold SET UP until the red LED blinks twice; then release. Enter 9-9-1, then the device group number (0= Cable, 1= TV, 2= VCR, 3= Audio). The LED blinks twice. Aim the remote at the device and press .
Programming Your Remote Control Changing Volume Lock The remote comes preset to allow independent volume control of each selected device (Global Volume Unlock). However, you may change the Volume Lock setting to Global Volume Lock so that one device’s volume will control volume in all other modes. After that, you can perform Individual Volume Unlock on a selected device to set its volume control for independent operation or Global Volume Unlock to remove all volume locking.
Programming Your Remote Control Manufacturer’s setup codessetup codes Audio Amplifiers Code Adcom Aiwa Arcam Bose Carver Cinema Sound Curtis Mathes Denon Durabrand Elan GE Grundig Harman/Kardon JVC Left Coast Lenoxx Linn Luxman Magnavox Marantz McIntosh Micromega 0577, 1100 0406 0269 0674 0892, 0269 0160 0300 0160 1561 0647 0078 0269 0892 331 0892 1561 0269 0165 0269 0892, 0269, 0321 0251 0269 Manufacturer Modulaire NEC Naim Nakamichi Optimus Panasonic Pass Labs Philips Pionee Polk Audio RCA RadioShack
Programming Your Remote Control Audio Amp/Tuners Manufacturer Code Manufacturer ADC AMC AMW Aiwa 0531 1077 1563, 1615 1243, 1405,1388, 1641, 0189, 0121, 0405, 0158 Akai 1255, 1512, 0244, 0346 Alco 1390 Amphion Media Works 1563, 1615 Anam 1609, 1074 Apex 1257 Apex Digital 1774, 1257, 1430 Arcam 1189, 1120 Audiotronic 1189 Audiovox 1390, 1627 B&K 0820, 0840, 0701, 0702 BK 0702 Bose 1229, 0639, 1253 Brix 1602 Cairn 0189 Cambridge Soundworks 1370 Capetronic 0531, 0195 Carver 1189, 0189, 0121, 1289, 0042, 0
Programming Your Remote Control Audio Amp/Tuners Manufacturer Code Sony 1609, 0181 1609, 0121, 0186, 0195, 0042, 0181, 0158, 0163, 0177 1437 0189 1869, 1383 1383 1519 1295, 1500 1189, 0189, 0346 1801, 1469, 1251, 0801, 0360, 0219 0322, 0163 0195, 0424 0186, 1286 1556 1077, 1653, 0491, 0502, 1423 1426 0424 1811, 1602, 1627 1869, 1532, 1383 Regent Revox Rio Rio Audio Saba Samsung Sansui Sanyo Scott Sears Sharp Sharper Image Sherwood Shinsonic Siemens Sirius Sonic Blue Code Yorx 1058, 1441, 1258, 1759,
Programming Your Remote Control Manufacturer Magnavox McIntosh Memorex Mitsubishi Motorola NEC Netsat Next Level Optimus Panasonic Paysat Philips Pioneer Primestar Proscan Code Manufacturer RCA 0724, 0722 0869 0724 0749 0869, 0856 1270 0099 0869 0724 0701, 0247 0724 0749, 1749, 1142, 1442, 0775, 0724, 0722, 0819, 1076, 0099 1142, 1442 0869 0566, 0392 RadioShack SKY Samsung Sanyo Sony Star Choice Star Trak Thomson Tivo Toshiba UltimateTV Uniden Voom Zenith Code 0566, 1142, 1442, 0775, 0143, 0855, 0392
Programming Your Remote Control Manufacturer Curtis Mathes Dayton Daytron Dell Denon Dumont Durabrand Dwin ESA Eaton Electroband Electrograph Electrohome Emerald Emerson Envision Fisher Fortress Funai Futuretech GE Gateway Gemini Gibraltar Gibralter A-Mark AOC Accuscan Action Admiral Advent Adventuri Agna Aiko Akai Albatron Alfi de Alleron Ambassador America Action American High Amstrad Amtron Anam Apex Apex Digital 0047, 0054, 0154, 0000, 0051, 0451, 0093, 0180, 0060, 0702, 0030, 0178, 0145, 0166, 11
Programming Your Remote Control Manufacturer Dell Denon Dumont Durabrand Dwin ESA Eaton Electroband Electrograph Electrohome Emerald Emerson Envision Fisher Fortress Funai Futuretech GE Gateway Gemini Gibraltar Gibralter Video GoldStar Goodmans Gradiente Logik MGA MGN Technology MTC Magnasonic Magnavox Majestic Marantz Matsushita Maxcent Maxent Megapower Megatron Memorex Micro Genius Midland Mitsubishi Code Manufacturer Monivision Motorola Multitech NAD 1454 0511, 0145 0017, 0180, 0178 0463, 0180, 01
Programming Your Remote Control Manufacturer RCA Realistic Runco SR2000 SSS SV2000 SVA Sampo Samsung Sanky Sansui Sanyo Saville Scotch Scott Sears Sharp Sheng Chia Shivaki Siemens Signature Signature 2000 Simpson Singer Solar Drape Sony Soundesign Spectravision Squareview Starlite Studio Experience Supreme Sylvania Symphonic Manufacturer TMK TNCi TVS Tandy Tatung Teac Technics 0090, 1547, 0047, 0054, 0000, 0051, 0093, 0178, 1047, 1147, 1247, 1347, 1447, 0679 0047 0047, 0154, 0180, 0150, 0030, 0178 00
Programming Your Remote Control VCRs Manufacturer A-Mark ABS Admiral Adventura Adyson Aiwa Akai Alba Alienware Allegro American High Amstrad Asha Astra Audiovox Avis Beaumark Bell & Howell Bell and Howell Broksonic CCE Calix Candle Canon Carrera Carver Citizen Classic Colortyme Colt Craig Criterion Crosley Crown Curtis Mathes CyberPower Cybernex Daewoo Daytron Dell Denon Derwant DirecTV Dual Dynatech Electrohome Electrophonic Manufacturer Code 0000, 0037, 0240 1972 0209, 0060, 0048, 0039, 0047, 0104 0000
Programming Your Remote Control Manufacturer Granada Grundig HI-Q HP Harley Davidson Harman/Kardon Harvard Harwood Hewlett Packard Hitachi Howard Computers Hughes Network Systems Humax Hush Hytek IKEC KLH KTV Kenwood Kodak LG LXI Linksys Lloyd’s Lloyds Loewe Logik M Electronic MEI MGA MGN Technology MTC MTC MTX Magnasonic Magnavox Magnin Marant1 Marta Matsui Matsushita Media Center PC Memorex Metz Microsoft Midland Mind Minolta Mitsubishi 0240 0000, 0240, 0072 0000, 0240, 0072 0000 1278, 0000, 0037, 02
Programming Your Remote Control Manufacturer RadioShack Radix Randex Realistic ReplayTV Ricavision Runco STS SV2000 SVA TT Nokia JVC Janeil Jensen Samsung Samtron Sanky Sansui Sanyo Scott Sears Sharp Shintom Shogun Siemens Signature Signature 2000 Singer Sonic Blue Sony Soundmaster Stack 9 Sylvania Manufacturer Code Symphonic Systemax TMK TNIX Tagar Systems Tandy Tatung 0000, 0035, 0037, 0048, 0047, 0162, 0240, 0104 0037 0037 0000, 0035, 0037, 0048, 0047, 0162, 0240, 0104, 0121 0614, 0616 1972 0039
Programming Your Remote Control DVD Players Manufacturer Apex Digital Aspire Digital Audiovox Axion Blaupunkt Blue Parade Blue Sky Brandt Broksonic California Audio Labs Celestial Centrex CineVision Cinea Citizen Clairtone Coby Craig Creative Curtis Mathes CyberHome Cytron DVD2000 Daewoo Dansai Decca Denon Denver DiViDo Digitrex Disney Dual Durabrand Electrohome Emerson Enterprise Entivo Enzer Firstline Fisher Funai GE GPX Gateway General Electric Go Video 0503, 0539 1016 0641 0899, 0770, 0705 0672, 07
Programming Your Remote Control Manufacturer NEC Naiko Nesa NexxTech Norcent Onkyo Optimus Orion Oritron Palsonic Panasonic Philips Phonotrend PianoDisc Pioneer Polaroid Polk Audio Portland Prima ProVision Proceed Proscan Prosonic Qwestar RCA RadioShack Radionette Realistic Reoc Revoy Rio Rotel Rowa SVA Saba Sampo Samsung Manufacturer Code Sansui Sanyo 0785, 0869 0770 0717 1402 1003, 1107 0792, 0503, 0627 0571 0695 0651 0672 0503, 0490, 1762,0703, 1362, 1462, 1490, 0571 0503, 0539, 0675,1267, 0646, 085
