SINGLE & DUAL INPUT LOUDSPEAKER ENCEINTE AVEC ENTRÉES MONO ET STÉRÉO Owner’s Manual 5601 METRO DRIVE, BALTIMORE, MARYLAND 21215, USA, 800-377-7655, FAX: 410-764-5266 www.polkaudio.
ATRIUM65 SDI FEATURES: FIGURE 1 Place the speaker in a corner for more bass output. Bracket attached to side wall. • Unique Dual Input/Single Input Feature: A simple switch, and its ingenious Dual Tweeter Array, allows the Atrium65SDI to be used either as a single high performance stereo loudspeaker, or the left-or-right speaker in a high performance stereo pair! Coloque el altavoz en una esquina para obtener mayor rendimiento de bajos. Soporte adosado a la pared lateral. • 6-1/2” (16.
PAINTING YOUR ATRIUM LOUDSPEAKERS PREPARING TO PAINT: You will need: • A spray can of primer paint (Krylon Sandable Spray Primer #1318, or equivalent). • A spray can of the paint of your choice. Choose exterior grade paint if you plan to use the speakers outdoors. • A paperclip or corkscrew (for removing the paintable grille) [figure 4]. 1. Separate the parts of the speaker. Remove the brackets and bracket knobs.
MOUNTING The Atrium’s bracket allows it to be mounted either horizontally or vertically and aimed to deliver the best possible sound in a variety of situations. Follow the steps below to safely secure the brackets and speakers. Installation of Atrium Series Loudspeakers requires basic skills in using tools such as a drill and screwdriver. If you are in doubt that you possess the necessary skills or tools, consult your Polk Audio dealer, or a professional installer. 1.
ALTERNATE SECURE MOUNTING MÉTHODE D’INSTALLATION PLUS SOLIDE MAKING THE CONNECTION LA CONNEXION For more solid mounting, screw the bracket directly into a weight-bearing stud on the mounting surface. Place the screws securely in the smaller end of the keyhole slot. Do not leave screwheads protruding. Pour une installation plus solide, visez le support directement dans un montant portant du mur. Enfoncez les vis solidement à travers a partie rétrécie des fentes en trou de serrure et dans le montant.
USE THE ATRIUM65 SDI AS ONE HALF OF A STEREO PAIR OF ATRIUM65 SDI LOUDSPEAKERS. UTILISATION DE L’ATRIUM65SDI POUR LE CANAL GAUCHE OU DROIT D’UNE PAIRE D'ENCEINTES ATRIUM65SDI 1. With the Dual Input/Single Input Switch set to “Single Left or Right” [figure 18] connect the Left OR Right speaker wire output from your receiver to accessible terminals of the Atrium65SDI. 1. Réglez le commutateur d’une Atrium65SDI à «Single Left or Right» [figure 18].
SPECIFICATIONS FICHE TECHNIQUE ATRIUM65 SDI ATRIUM65 SDI Frequency Response Réponse en fréquences 50Hz-20kHz 50Hz-20kHz Recommended Power 10-125W Continuous Puissance recommandée 10-125W en continu Impedance Compatible with 8 Ohm outputs Impédance Compatible avec sorties 8 Ohm Efficiency (2.83Vrms, 1m) 89dB Efficacité (2,83Vrms, 1m) 89 dB Available Finishes Black & White Environmental Standards ASTM D5894-96UV Salt Fog, Mil Standard 810 Immersion, Mil-Std 883 Method 1009.
POLK AUDIO LIMITED WARRANTY GARANTIE LIMITÉE Polk Audio, Inc. warrants to the original purchaser only that this Polk Audio Loudspeaker Product (the “Product”) will be free from defects in materials and workmanship for a period of two (2) years from the date of original retail purchase from a Polk Audio Authorized Dealer.