Owner's Manual

• To install the speaker, first carefully remove
the grille using a straightened paperclip or
other pointed metal tool. Insert the point
into one of the grille perforations near a
corner
and lift the grille free. Never use
a knife or screwdriver to pry between the
grille and the speaker frame. This will
damage your speaker.
• Loosen the rotating wall clamps by
unscrewing them. Make sure that the
rotating wall clamps are flipped inwards
so that your speaker fits into your cutout
without nicking your wall. Then place the
speaker carefully into the cutout [figure
13]. If you have a level, use it to help you
correctly align the speaker. Tighten the
wall clamp screws with a screwdriver. This
will rotate the wall clamps and secure the
speaker to the wall. Hint-on the LC265j
and LC65i models, tighten the center
screws before tightening the corners for
the most flush fit to your wall. Do not over-
tighten the wall clamp screws [figure 14].
FIGURE 13
Place the speaker carefully into the cutout.
Co/oque cuidadosamente el altavoz en el agujero.
Placez
delicatement Ie haut-par/eur dans I'ouverture.
Platzieren
Sie die Lautsprecher vorsichtig in der
ausgeschnittenen OHnung.
• Carefully reinstall the grille by fitting it into
its recess so that it is just resting on the
frame. Starting with one corner, go around
the speaker and push the grille into the
grille notch a little bit at a time. Be gentle;
the grille may be easily bent out of shape
by rough handling. You will feel a positive
"snap" when it is fully in place. (Where's
the corkscrew?)
U'
FIGURE 14
Tighten reloining wall clamps to engage wall. Use a
#2 Phillips head screwdriver or a pawered screwdriver.
Apriete las prensas de retencion de la pared para
enganchar el allovoz a la pared. Use un destornillador
Phillips
No. 2 0 un destornillador electrico.
Reserrez les attaches murales pour fixer solidement I'unite au
mur. Utilisez un tournevis ou une perceuse a tete Phillips no 2.
Iiehen Sie die Wandklemmen fest, um das System an der
Wand zu befestigen. Verwenden Sie dazu einen
Kreuzschlitzschraubendreher (Nr. 2) oder einen
Schraubendreher mit Motorantrieb.
For Customer Service, call 800-377-7655. 10