Owner's Manual

MAKING ADJUSTMENTS
The LCi Series features technology that can
tailor the sound for performance in difficult
or unusual placement situtations.
LC265i, LC65i, LC80i & LC60i MODEL
ADJUSTMENTS:
Wall Distance Toggle - In-wall loud-
speakers excel when placed'more than 2'
(60cm) from side walls. If position limitations
demand that in-wall loudspeakers be installed
closer than 2'(60cm) from side walls, the
proximity of the surface can result in a
response "bump" between 50 and 200Hz.
This can cause in-wall speakers to sound
"boomy." The Distance Toggle Switch flattens
response and tunes out "boominess" without
sacrificing
deep bass response, for more life-
like sound.
Recommended speaker
distance
from side walls
is 2 feet (60cm).
v
FIGURE 5
" placementis closer than 2' to a wall, engage the Wall Distance
Toggle ("Wall Dist.")
to match the <2' setting.
En cas de posilionnement amoins de 5 cm (2 pouces) du mur,
meffre
Ie commutateur de distance par rapport au mur ("Wall
Dist. ") dans la position < 2'.
Si el a/tavoz queda a menos de 61 cm (2 pies) de la pored, lije el
interruptor &ascu/ante
de distancia a la pared ("Wall Dist.") en la
posicion <2'.
Wenn
der Wanda&stond weniger als 60 cm (2 FuB) &etriigt,
scha/ten Sie
den Wanda&standsscha/ter ("Wall Dist.") ein, um mit
der Einstellung <2'. ii&ereinzuslimmen.
-3dB 1\veeter Attenuation - If your lis-
tening room is very reflective, with smooth
sheetrock walls, hardwood floors, and
non-cushioned furniture, the sound will be
overly "bright" and unnatural.
Engaging the LCi Tweeter Attenuation feature
(by selecting the "Cut" setting) compensates
for the effect of reflectivity in a hard room.
Tweeter Attenuation flattens room response
without hindering higher frequency response,
for warmer, more
realistic sound and more accurate imaging.
For Customer Service, call 800-377-7655. 4