Owner's Manual

PAINTING YOUR Lei SERIES IN-WALL
LOUDSPEAKERS
You will need:
• Paint of your choice (to make the job easi-
er, we recommend spray painting the grille)
• A
paperclip or corkscrew (for removing the
paintable grille, corkscrew can also be used
to open the wine when you relax with your
newly painted Lei speakers, see page 10).
• Masking tape
• Paint mask (to cover unpaintable
parts, suppJied.0
:::::::::::::'~.'.~~~
.... ... ..... ... .~-.;:.....,
·............ .. . ..
· .
· .
· .
· .
· .
· .
· .
· .
· .
· .
· .
· .
· .
· .
· .
· .
· .
· .
· .
· .
· .
· .
FIGURE 7
Use a paperclip 10 remove grille.
Use
un sujetapapeles para quitar la rejilla.
Utilisez
un trombone pour retirer la grille.
Entfernen 5ie
den Gitteraufsatz mit einer Biiraklammer.
PREPARING TO PAINT:
1. Separate the parts of the speaker. If the
speaker is not yet installed, the grille can
be removed simply by pushing the clamp
screws forward to push the grille off the
speaker from the inside. If the speaker is
already in the wall, carefully hook the
grille with a bent paper clip and pull it
gently away from the frame [figure 7].
2. Remove the cloth scrim from the inside of
the grille. Replace after paint dries.
3. When painting the frame of the speaker,
use the supplied paint masks to carefully
mask off the front of the speakers to pro-
tect the drivers and baffles while painting.
You can do this while the speaker is
already installed in the wall (if, for
instance, you're repainting the room). If
you do not have the paint masl<s, carefully
mask the speaker components using paper
and masking tape.
FIGURE 8
Mask the drivers and baHles, then spray paint in thin coats.
Enmascare los
excitadores y los bafles, luego
aplique manos delgadas de pintura aerosol.
Masquez les haut'parleurs et les ecrans acoustiques
puis
vaporisez la peinture en couches minces
Decken 5ie die Treiber
und Resonanzwande abo
5pritzen 5ie dann den Lack in diinnen 5chichten auf.
For Customer Service, call 800-377-7655. 6