MCS5 MC60 MC65 MC60 OWNER'S MANUAL polkaudio® MANUEL D'UTILISATION MANUAL DEL PROPIETARIO
ENGLISH SAFE LIMITS OF OPERATION PRODUCT DISPOSAL Polk Audio specifies the recommended amplification range for each of its passive (non-amplified) loudspeakers Typically that specification will be expressed as a range of power such as 20-200 Watts (per channel).
PLACEMENT OPTIONS ADJUSTING THE TWEETERS Polk Audio MC Series loudspeakers give you nearly endless placement options. But remember, where you locate in-wall speakers bears careful consideration, as installation requires that you cut a hole in your wall! Aiming the tweeters toward your listening position improves imaging and detail. When using MC Series loudspeakers as front/main home theater speakers (figure 2), aim the tweeters toward your listening position.
PREPARING TO PAINT: 1. If the speaker is not yet installed, the grille can be removed simply by pushing the clamp screws forward to push the grille off the speaker from the inside. If the speaker is already in the wall, carefully hook the grille with a bent paper clip and pull it gently away from the frame (figure 6). Figure ~MC60, MCSO Models While supporting the tweeter bridge, carefully use your index finger to aim the tweeter.
PAINTING THE FRAME: 1. Apply paint to exposed (unmasked parts). Use two or more thin coats. Spray painting is recommended (figure 7). 2. When the paint is completely dry, remove the masking material. PAINTING THE GRILLE: 1. The grille of the Me Series speaker features an even, protective powder coating. This powder coating is an ideal primer. 2. Grilles must be spray painted. Do not use a brush and paint. Thick, brushed paint may clog the grille holes. 6.
INSTALLATION Follow These Easy Steps: If you intend to do the installation yourself, we recommend that you possess some skill in the proper use of hand and power tools. You should have athorough understanding of local building and fire codes and a familiarity with the area behind the wall or ceiling into which you plan to install your speakers. Install speaker wires before installing speakers. Wire meeting appropriate building and fire codes must be used.
3. Carefully cut a hole with the appropriate cutting tool for your wall or ceiling material. Start the hole by drilling on the inside of the tracing (with the drill bit touching the line). Use this hole to insert the saw or knife and begin cutting (figure 11). 4. Once you have cut the hole, fish your previously positioned wiring out of the hole and connect the speaker. Follow the hookup directions included with your receiver. Strip 3/8" (9.
7. If you have a level, use it to help you correctly align the speaker. Tighten the wall clamp screws with a screwdriver. This will rotate the wall clamps and secure the speaker to the wall. Hinton the MC65 and MC85 models, tighten the center screws before tightening the corners for the most flush fit to your wall. Do not over tighten the wall clamp screws Ifigure 14). 8. Carefully reinstall the grille by fitting it into its recess so that it is just resting on the frame.
This is your product Model and Serial Number. Enter this number in the "Serial Number" space when registering your product online Keep this card handy for Model and Serial Number reference when calling Polk Customer Service. polkaudio® Register Your New Polk Audio Product Online NOW for aChance to win $500 of Polk Product www.polkaudio.
polkaudio® Modele de produit et numaro de serie. Inscrivez ce numero dans la case « serial number)) lors de I'enregistrement du produit en ligne. Conservez cette carte en guise de reference au modele et au numero de sarie lorsque vous contactez Ie Service ala Clientele de Polk. Modele et numero de serie du produit dans I'encadre au verso. Enregistrez Votre Nouveau Produit Polk Audio En Ligne des maintenant et courez la chance de gagner pour 500$ de produits Polk www.polkaudio.
Lifetime Warranty for Polk Audio In-Wall and In-Ceiling Speakers (For Products purchased after September 9, 2009) • • • • Polk Audio warrants to the original retail purchaser that Polk Audio branded in-wall and in-ceiling speakers, including passive CSW series subwoofers (collectively "product"), will be free from defects in materials and workmanship for the life of the product, under normal use and conditions.
TO ASSUME FOR IT ANY LIABILITY IN CONNECTION WITH THE SALE OF THE PRODUCT. POLK HAS ABSOLUTELY NO LIABILITY FOR ANY ACTS OF THIRD PARTIES. SOME STATES DO NOT ALLOW THE EXCLUSION OF CERTAIN IMPLIED WARRANTIES, OR CONDITIONS ON AN IMPLIED WARRANTY, SO THE ABOVE LIMITATION MAY NOT APPLY TO YOU. POLK DOES NOT ACCEPT LIABILITY FOR SPECIAL, INDIRECT, INCIDENTAL, PUNITIVE OR CONSEQUENTIAL DAMAGES, LOST PROFITS, LOST SAVINGS OR DAMAGES RESULTING FROM IMPROPER USE, OR THE INABILITY TO USE THE PRODUCT.
