Owner's Manual

Sheer-Grille™ Painting:
1. Elevate grille off of a flat surface.
2. Hold spray can about 12
11
away at 45° angle.
3. Apply one light, thin coat. Move evenly side to side.
Work around the perimeter to cover frame.
4. After the first application of paint, rotate the grille 90°.
Important Note: You must rotate the grille 90°.
Always rotate the grille in the same direction.
5. Three light even coats should cover the grille and frame.
(See Owner's Manual for more detailed instructions.)
Crossover Warning:
WARNING-WARNING-WARNING
Exercise extreme caution when installing this
loudspeaker so you do not damage the crossover.
Important Installation Instructions:
1. Check rotating cams by hand to ensure they are not too tight.
2. Do not exceed torque setting #2 on a powered screwdriver.
3. DO NOT OVER-TIGHTEN MOUNTING SCREWS.
If Installing A Performance Enclosure:
(All 265 & 65 Models)
Ensure
the speaker wire does not become caught between
the back of the diffuser and the performance enclosure.