O W N E R ’ S M A C300.2 Carbon Series 2/1 Channel Amplifier C300.
Polk Audio—A Passion for Sound Polk Audio — La passion du son Welcome to the Polk Audio family! For over thirty years, George Klopfer and I, and all the people at Polk Audio, have been designing and building sound equipment for people like you: the person who demands high quality and outstanding performance at a reasonable price.
Getting Started Guide de démarrage Please inspect your new amplifier(s) carefully. Notify your Polk Audio dealer if you notice any damage or missing items. Keep the carton and packing material; this will do the best job of protecting your equipment if it must be transported. Veuillez inspecter votre nouvel amplificateur avec soin. Si vous découvrez des anomalies, des avaries ou s'il manque des pièces, contactez votre revendeur agréé Polk Audio.
All Carbon Series Amplifier Models Feature: • Polk’s Maximum Dynamic Headroom (MDH) Power Supply allows Polk/MOMO Amplifiers to deliver more instantaneous power peaks, easily driving your speakers during musical peaks. Get “max headroom” (!) and more power for low impedance loads. • Each model features fully adjustable electronic crossovers to power any install using any speakers on the market.
Read This First À lire attentivement Installing a car audio system is a serious project. If you have any doubts about your ability to execute any of the installation steps found in this manual, save yourself a lot of grief and contact a professional installer. Your Polk Audio dealer is a good place to find one. If you intend to do the installation yourself we assume you possess some skill in the proper use of hand and power tools.
Notes About Electrical Installation • ALWAYS DISCONNECT YOUR VEHICLE’S BATTERY GROUND BEFORE WORKING WITH YOUR VEHICLE’S ELECTRICAL SYSTEM. • This amplifier is designed for use in vehicles with 12-volt, negative-ground electrical systems. Use of this product in vehicles with positive-ground, or with voltages other than 12 volts, may result in damage to the product and the system, and will void the warranty. This product is NOT certified or approved for use in aircraft.
Installing Your New Polk Audio Amplifier Installation de votre nouvel amplificateur Polk Audio Before installing your new amplifier, carefully choose the location for the installation. The amplifier should have at least 2" (5cm) of ventilation space on all sides to allow heat to rise and dissipate away from the amplifier. Be sure that the power and signal cable connections can enter and leave the amplifier in a straight line to avoid the risk of kinked wires causing a malfunction.
Typical Installation Installation typique ALWAYS DISCONNECT YOUR VEHICLE’S BATTERY GROUND BEFORE WORKING WITH YOUR VEHICLE’S ELECTRICAL SYSTEM. DÉBRANCHEZ TOUJOURS LE RACCORD DE MISE À LA MASSE DE LA BATTERIE AVANT DE TRAVAILLER SUR LE SYSTÈME ÉLECTRIQUE DU VÉHICULE. ALWAYS BE AWARE OF THE LOCATION OF HIDDEN WIRES, CABLES AND FLUID LINES BEFORE DRILLING HOLES OR MAKING CONNECTIONS.
Typical Installation, continued For the ground connection, also use the largest gauge cable available. Connect to the terminal marked GND and then connect this cable directly to your car’s chassis. Keep the length of the GND connection as short as possible, ideally under 6", to avoid ground loops and engine noise hum problems. Make certain that the ground point is directly connected to the car’s metal chassis, with no dirt or paint getting in the way of a clean metal-to-metal connection. 7.
Wire Routing Options Options pour le passage des fils L R For Flush Mount installations (where amp sits directly on solid surface), route wiring through side vents of end caps BEFORE wiring into the amp. Pour montage en surface (lorsque l’ampli repose sur une surface solide) passez les fils à travers les évents latéraux de l’amplificateur avant de les connecter à l’amplificateur. R For Stealth installations, route wiring down through bottom opening under removeable plate.
W W W . P O L K A U D I O .
Detailed Adjustments for the Amp Panel 1 REMOTE BASS GAIN MODULE JACK Accepts telephone jack input connection from the remote bass gain module (only works when crossover is set to LP). Set GAIN (6) to max when using the remote. Remote bass gain module is sold separately. See your Authorized Polk AutoSound Dealer or visit the webstore at polkaudio.com. 2 CROSSOVER MODE SELECTOR SWITCH A] set to LP position when the amplifier is used to drive a subwoofer.
4 COMMUTATEUR « POLK/MOMO PRE-EQ » Le commutateur d’égalisation préréglée (Pre-EQ) maximise la performance de la chaîne lorsqu’un subwoofer Polk/MOMO est utilisé avec le sélecteur du « mode de séparation » en position « LP » ou qu’un haut-parleur Polk/MOMO à gamme intégrale est utilisé avec le sélecteur du « mode de séparation » en position « HP ». Le commutateur « Pre-EQ » est hors circuit lorsque le sélecteur du « mode de séparation » est à la position « OFF ».
2 1 3 120 4 6 5 150 2-Channel Coax Hook-Up Connexion de h.p. coaxiaux pour deux canaux Settings DIST.
Woofer Tweeter 4 Pre-EQ "ON" 3 2 Settings Crossover Output from headunit L 2-Channel Component System Connexion de composants pour deux canaux t est W W W . P O L K A U D I O . C O M / A M P S 15 R BATTERY Crossover Remote turn on from source unit FUSE DIST.
P O L K / M O M O : C H A M P I O N S H I P P E R F O R M A N C E 4 Pre-EQ "ON" 3 2 Settings Output from headunit Bridged Subwoofer Subwoofer connecté en pont (BRIDGED) L R BATTERY DIST. BLOCK Connect to nearest chassis ground Subwoofer impedance should be 4Ω or greater.
Sketch Your Custom Install Configuration for Future Reference Here: Pour référence future, faites un croquis de votre installation personnalisée ici: W W W . P O L K A U D I O .
Power Connection Details Before installing your amplifier, disconnect the negative (ground) wire from the vehicle’s battery and secure it away from the battery. This will prevent accidental damage to the system. And to yourself as well. This amplifier’s “+12 VDC” and “GROUND” (chassis ground) connections are designed to accept 4 AWG power wire or smaller. We recommend a power wire of at least 8 AWG. Bigger power wire means more room for more power to flow.
Protect Your Hearing! Protégez vos oreilles! Now that you’ve got Polk Audio equipment in your car you’re a valued member of the Polk Audio family. We want you, and your hearing, to be around for a long, long time. We urge you to practice restraint in the operation of this product so as not to damage your hearing (and that of other people in your car, or in your neighborhood). Studies have shown that continuous exposure to high sound pressure levels can lead to permanent irreparable hearing loss.
C300.2 Specifications Fiche technique du C300.2 Power Output: RMS Continuous Power (at 14.4V at the input terminals, 20Hz - 20kHz) Puissance de sortie: Puissance RMS continue (14,4V à l’entrée, 20Hz - 20kHz) Per Channel into 4 Ohms (0.1% THD+N) 150W Par canal, 4 Ohms (0.
Polk/MOMO Series Limited Warranty Polk Audio, Inc., warrants to the original retail purchaser only. This warranty will terminate automatically prior to its stated expiration if the original retail purchaser sells or transfers the Product to any other party. Polk Audio, Inc.
Garantie limitée Polk/MOMO Series La garantie de Polk Audio, Inc. n’est valide que pour l'acheteur au détail original. La garantie sera automatiquement annulée avant sa date d’expiration spécifiée si l'acheteur original vend ou transfère le produit à tout autre parti. Polk Audio Inc.
W W W . P O L K A U D I O .
5601 Metro Drive Baltimore, Maryland 21215 (800) 377-7655 www.polkaudio.com www.polkmomo.com Contact Polk Audio Customer Service 800-377-7655 (M-F, 9-6 EST, US only) or via email polkcs@polkaudio.com. Outside the US, call 410-358-3600. Communiquez avec le Service à la Clientèle de Polk Audio au 410-358-3600 (au Canada et aux É.-U. seulement, du lundi au vendredi, de 9h00 à 18h00, HE - à l’extérieur des É.U. et du Canada, au 410-358-3600, ou par courriel : polkcs@polkaudio.com.