Manualshelf

User Manual

ManualsBrandsPolk Audio ManualsCar AudioDB+ Series 5-1/4" 2-Way Coaxial Speakers with Polypropylene UV Tolerant Cones (Pair) - Black
78910111213141516
19
DE
DB 5252, DB 6502
Figure 11
Surface mount tweeter mounting
1. Using the base of the surface mount cup as a
template, mark the screw hole and drill them
using a 1/8” (3mm) drill bit. Drill a second hole
(for the speaker wire) using a 3/16” (5mm) drill bit.
2. Screw surface mount cup to the panel.
3. Push the tweeter wires through the open area at the bottom of the
cup and through the 3/16” (5mm) hole in the panel.
4. Connect wires from the tweeter terminals of the Crossover to the tweeter wires using fast on
connectors. Be sure to connect the red wire strand from the tweeter to the (+) terminal of the
crossover tweeter output.
5. Mount the tweeter by snapping it into the mounting cup.
Figure 11