AMP HOOKUP CONNEXION À L’AMPLIFICATEUR NOTE: USE WITH 2 OHM COMPATIBLE AMPLIFIERS. NOT ALL AMPLIFIERS ARE STABLE INTO A 2 OHM LOAD (ESPECIALLY IN BRIDGED MODE). PLEASE CONSULT YOUR AMPLIFIER’S OWNER’S MANUAL. NOTE: UTILISER AVEC AMPLIFICATEURS COMPATIBLES AVEC CHARGES DE 2 OHMS. LES AMPLIFICATEURS NE SONT PAS TOUS STABLES AVEC UNE CHARGE DE 2 OHMS (SURTOUT EN MODE PONTÉ). CONSULTEZ LE MANUEL DE VOTRE AMPLIFICATEUR. Getting Started Guide de démarrage Please inspect your loudspeaker(s) carefully.
SPECIFICATIONS/FICHE TECHNIQUE db212-2 Type subwoofer enclosure/slot ported/Caisson de subwoofer / évent à fente Frequency Response/Réponse en fréquences 27Hz - 200Hz Driver Complement/Transducteurs 2 - 12” subwoofers Nominal Impedance/Impédance nominale 2 ohms Power Handling (RMS)/Puissance admis. (RMS) 720 watts Power Handling (Peak)/Puissance admis. (crête) 1500 watts Efficiency/Efficacité 103dB Dimensions Bottom Depth - 17 1/8" (43.
WARNING: LISTEN CAREFULLY Polk Audio loudspeakers and subwoofers are capable of playing at extremely high volume levels, which could cause serious or permanent hearing damage. Polk Audio, Inc. accepts no liability for hearing loss, bodily injury or property damage resulting from the misuse of its products. Keep these guidelines in mind and always use your own good judgment when controlling volume: • You should limit prolonged exposure to volumes that exceed 85 decibels(dB).