GXR XR the speaker specialists GXR Series Full Range Loudspeakers ® GXR owner’s POLK AUDIO 5601 METRO DRIVE BALTIMORE, MARYLAND 21215 (800)377-7655 http://www.polkaudio.
GETTING STARTED Please inspect each loudspeaker carefully. Notify your Polk Audio dealer if you notice any damage or missing items. Keep the carton and packing material. They will do the best job of protecting your speakers if they need to be transported.
INSTALLING GXR SERIES FULL RANGE LOUDSPEAKERS Installation in a factory location 1. Carefully remove the grille covering the factory speaker. In most cases it will be “press-fit” or screwed to mounting tabs molded into the surrounding area. If you experience any resistance, consult your dealer or your car’s owner’s manual to determine if there is any special way the manufacturer has secured the grille. 2.
GXR4 SPECIAL INSTRUCTIONS FOR IMPORT APPLICATIONS (TOYOTA/MITSUBISHI) GXR4 models have flanges that can be removed to facilitate easy placement in tight spots, such as in some import vehicles (FIG. 3). Remove only the flange(s) that are necessary to make the speaker fit the chosen location. Secure the speaker with at least two opposing flanges. In some vehicles, you may have to bend or angle (but not break) one of the two flanges to get the proper fit when installing the speakers in your dashboard.
AMPLIFIER POWER REQUIREMENTS Your new GXR Loudspeaker will work well with a variety of electronic components. As little as 10 watts per channel will deliver adequate listening levels in most cars. If you have a noisy car or intend to play your system at loud listening levels, more power will be necessary to achieve the best performance. Consult your Polk Audio dealer for specific amplifier recommendations.
GXR SERIES FULL RANGE SPECIFICATIONS GXR SERIES 1 YEAR WARRANTY GXR5 51/4" coaxial (133.4mm) GXR46 4" X 6" coaxial (101.6mm x 152.4mm) GXR4 4" coaxial (101.6mm) 5 1/4" (133.4mm) mid/woofer, 1/2" (13mm) PEI tweeter 4" X 6" (101.6mm x 152.4mm) mid/woofer, 1/2" (13mm) PEI tweeter 4" (101.6mm) mid/woofer, 1/2" (13mm) PEI tweeter Mounting Dimensions 4 9/16" (15.9mm) 3 3/4” x 6” (95.3mm x 152.4mm) 3 3/4" (95.5mm) Mounting Depth (top) 2" (50.8mm) 1 3/4" (44.5mm) 1 3/4" (44.