Instruction Manual

PHYSICAL DIMENSIONS
Note: LCi-RTS105 speakers are designed to be installed
as mirror imaged. This means that the tweeter is
always located on the outside as the speaker is mount-
ed into a wall. To accomplish this, simply turn the
speaker upside down.
LEFT RIGHT
STUD-LOCK MOUNTING SYSTEM™
(SOLD SEPARATELY)
While not absolutely necessary, the Stud-Lock
Mounting System™ does help ensure that LC
i-RTS
Series speakers perform at their optimum. The
mounting system creates a rigid platform for the
LC
i-RTS105, increasing bass performance, clarity
and reducing unwanted structure borne vibration.
Stud-Lock Mounting System
™
Installation
See the instructions included with each Stud-Lock
Mounting System
™
.
Important Note: For new construction: If you are using
a pre-construction bracket, always install it first before
installing the Stud-Lock Mounting System
™
.
If you ar
e installing a pr
e-construction bracket (PB105)
and a Stud-Lock Mounting System (STL105) together
, be
aware that the speaker’s enclosure can catch on the
edge of the pre-construction bracket. Push the bottom
of the loudspeaker enclosur
e up and over The pr
otr
ud
-
ing edge of the pre-construction bracket. This will
fully seat The loudspeaker in the wall.
SPECIFICATIONS
Model LCi-R
TS105
Recommended Amplification 10-250W
(W/channel)
Impedance(Nominal) 4 Ohms
Frequency Response (+/-3dB) 50Hz – 27kHz
(80Hz-26kHz)
Ef
ficiency (2.83V@1M) 92db
Speaker Weight 12.5 lbs.
Depth assum. 1/2" dr
ywall 3 3/4" (9.5cm)
Cutout Width
10 5/8" (27.0cm)
For mor
e infor
mation visit our website at www
.polkaudio.com
3
Cutout
Height
20 1/8"
(51.1cm)
Mounting Depth
(Depth assum. 1/2" drywall)
3 3/4" (9.5cm)
Overall
Height
21 7/8"
(55.4cm)
Overall Width
12" (30.5cm)
Depth measured from the back of the
enclosur
e to the back of the baffle
4 1/4" (10.8cm)