User Manual

DSP Amplifier Module Features
Connection for the DSP Amplifier Box Cable: Use this input to connect your Audio Mixer to the DSP Amplifier.
Dolby Headphone Toggle Switch: Toggles between Dolby Headphone and Stereo/5.1 downmix.
Dolby Headphone LED: When the unit is on, this LED will glow amber when Dolby Headphone is off
and the unit is outputting a stereo signal. The LED will glow green when Dolby Headphone is enabled
and the unit is outputting a surround sound effect.
LED: When the unit is powered ON, this LED will be ON.
Optical Audio (Toslink) Connector: Sends digital audio from your console to the DSP Amplifier.
USB Connector: Powers your headset with a connection from the DSP Amplifier to your Xbox
®
360 controller.
USB Connector
Optical Audio Connector
Dolby Headphone
Toggle Switch
Connection for the DSP Amplifier Box Cable
When plugged in, the DSP amplifier
powers up automatically powers up.
LED:
Dolby Digital Signal (green)
Stereo Signal (yellow)