Owner`s manual

ENGLISH
CEA SPECIFICATIONS
-
-
PA40D.1 Power Output: 200 Watts RMS x 1 at 4 Ohms and::;; 1% THD+N
Signal to Noise Ratio: -60 dBA (reference 1 Watt into 4 Ohmsl
Additional Power: 400 Watts RMS x 1 at 1 Ohm and::;; 1% THD+N
PA6DD.1 Power Output: 300 Watts RMS x 1 at 4 Ohms and::;; 1% THD+N
Signal to Noise Ratio: -60 dBA (reference 1 Watt into 4 Ohms)
Additional Power: 600 Watts RMS x 1 at 1 Ohm and::;; 1% THD+N
PA12DD.1 Power Output: 400 Watts RMS x 1 at 4 Ohms and::;; 1% THD+N
Signal to Noise Ratio: -60 dBA (reference 1 Watt into 4 Ohms)
Additional Power: 1200 Watts RMS x 1 at 1 Ohm and::;; 1% THD+N
SoOW X 1 1200W x 1 2400W X1
RMS Continuous Power
400W X 1 600W x 1
1200W x 1
@ 1 Ohm'
RMS Continuous Power
300W x 1
400W x 1
SOOW x 1
@ 2 Ohms
2
Frequency Response 2o-250Hz 20-25OHz 2o-250Hz
Damping Factor
150 150 150
Variable Low Pass
3D-250Hz 3D-250Hz 3D-250Hz
Crossover 12dB slope
Subsonic Filter
Yes Yes Yes
Bass Boost Yes Yes Yes
Input Impedance
20K 20K
20K
Input Sensitivity
15OmV/7.5V
15OmVj7.5V
150mV/7.5V
Output Load 1 ohm 1 ohm
1 ohm
Fusing
2x 25A 2x 30A 3x 40A
Illuminated LED Driver Yes Yes
Yes
External Fan Driver
Yes Yes Yes
Pass Through RCA Jacks
Yes Yes Yes
, RMS continuous power driven into 1 Ohm from 20 to 250Hz @ 14.4VDC with lessthan 1% THD+N.
2 RMS continuous power driven into 2 Ohms from 20 to 250Hz @ 14.4VDC with lessthan 1% THD+N.
www. POL K A U D I 0 . COM / AMP S 15