Assembly Instructions

nuts inside the recesses in the chassis. Note: if you are also adding a basic sumo blade
[https://www.pololu.com/product/1410], you should place its mounting tabs on top of the acrylic
mounting place so that its holes line up with the two front-tab holes and use the #2-56
machine screws to mount both the blade and the acrylic mounting plate to the chassis. Do
not try to adjust the angle of the sumo blade while it is mounted to the chassis as this can
crack the acrylic mounting plate.
10. At this point, you can add the silicone tracks by stretching them around the sprockets on each
side of the chassis, or you can leave this for the final step.
Pololu Zumo Chassis User’s Guide © 2001–2019 Pololu Corporation
3. Assembling the Zumo Page 10 of 12