Manualshelf

Data Sheet

ManualsBrandsPololu ManualsMotor ControllersPololu RC Switch w/ Digital Output
12345678910
Pololu RC Switch with Small Low-Side MOSFET
with included hardware.
3.2. Connecting the RC Switch with Small Low-Side MOSFET
The typical way to connect the Pololu RC Switch with Small Low-Side MOSFET is shown in the diagram below:
Pololu RC Switch with Small Low-Side MOSFET, typical wiring diagram.
The RC switch can be plugged directly into an RC receiver or servo controller using a Female-Female servo extension
cable. These can be found in our Servo Cables [https://www.pololu.com/category/112/servo-cables] category. The switch will
read the signal from the RC receiver, but in the default configuration it will not draw or supply any power to the
receiver, so the power wire is optional. The receiver will need its own power source.
Pololu RC Switch User’s Guide © 2001–2015 Pololu Corporation
3. RC Switch with Small Low-Side MOSFET Page 10 of 35