Data Sheet

The Pololu 4-Channel RC Servo Multiplexer [https://www.pololu.com/product/2806] is an RC switch with

an integrated quad 2-input multiplexer and a voltage regulator. It allows easy switching of servo

control between two independent sources. It is ideal for applications in which you have two possible

control sources and want to be able to switch between them on the fly. The RC multiplexer is available

fully assembled [https://www.pololu.com/product/2806] or as a partial kit [https://www.pololu.com/product/

2807].

In this guide, we use the term “RC switch” to refer to all members of the Pololu RC Switch family, including the RC

multiplexer.

Pololu RC Switch with Medium Low-

Side MOSFET on a breadboard.

The Pololu RC Switch with Relay

connected to a typical RC receiver.

Note: This guide does not apply to our older RC switches (products #721 [https://www.pololu.com/product/

721], #722 [https://www.pololu.com/product/722], #752 [https://www.pololu.com/product/752], #1210

[https://www.pololu.com/product/1210], #1211 [https://www.pololu.com/product/1211]).

1.1. Contacting Pololu

We would be delighted to hear from you about any of your projects and about

your experience with the RC switch. You can contact us

[https://www.pololu.com/contact] directly or post on our forum

[http://forum.pololu.com/]. Tell us what we did well, what we could improve,

what you would like to see in the future, or anything else you would like to

say!

1. Overview Page 3 of 35